To configure the bootup diagnostic level to trigger diagnostics when the device boots, use the diagnostic bootup level command. To remove the bootup diagnostic level configuration, use the no form of this command.
diagnostic bootup level { bypass | complete }
no diagnostic bootup level { bypass | complete }
|
bypass
|
Specifies that all bootup tests are skipped.
|
|
complete
|
Specifies that all bootup diagnostics are performed. This is the default value.
|
Complete
Global configuration mode
|
Release
|
Modification
|
|---|---|
|
4.0(0)N1(1)
|
This command was introduced.
|
|
4.2(1)N2(1)
|
Support was added to control the diagnostic level of all the Fabric Extenders connected to the switch.
|
This example shows how to configure the bootup diagnostics level to trigger the complete diagnostics:
This example shows how to remove the bootup diagnostics level configuration:
|
Command
|
Description
|
|---|---|
|
show diagnostic bootup level
|
Displays the bootup diagnostics level.
|
|
show diagnostic bootup result
|
Displays the results of the diagnostics tests.
|