To display the Fibre Channel timers (fctimer), use the show fctimer command.
show fctimer [ d_s_tov [ vsan vsan-id ] | e_d_tov [ vsan vsan-id ] | f_s_tov [ vsan vsan-id ] | r_a_tov [ vsan vsan-id ] | last action status | pending | pending-diff | session status | status | vsan vsan-id ]
|
d_s_tov
|
(Optional) Displays the distributed services time out value (D_S_TOV) in milliseconds.
|
|
vsan
vsan-id
|
(Optional) Displays information for a Virtual SAN (VSAN). The range is from 1 to 4093.
|
|
e_d_tov
|
(Optional) Displays the error detection timeout value (E_D_TOV) in milliseconds.
|
|
f_s_tov
|
(Optional) Displays the fabric stability timeout value (F_S_TOV) in milliseconds.
|
|
r_a_tov
|
(Optional) Displays the resource allocation time out value (R_A_TOV) in milliseconds.
|
|
last action status
|
(Optional) Displays the status of the last Cisco Fabric Services (CFS) commit or discard operation.
|
|
pending
|
(Optional) Displays the status of pending fctimer commands.
|
|
pending-diff
|
(Optional) Displays the difference between the pending database and running configuration.
|
|
session status
|
(Optional) Displays the state of the fctimer CFS session.
|
|
status
|
(Optional) Displays the Fibre Channel timer status.
|
None
EXEC mode
|
Release
|
Modification
|
|---|---|
|
4.0(0)N1(1a)
|
This command was introduced.
|
This example shows how to display the configured global TOVs:
This example shows how to display the configured TOVs for a specified VSAN:
|
Command
|
Description
|
|---|---|
|
fctimer
|
Configures fctimer parameters.
|