To convert an autocreated SAN port channel to a persistent SAN port channel, use the san-port-channel persistent command.
san-port-channel port-channel-id persistent
|
port-channel-id
|
Port channel ID. The range is from 1 to 128.
|
|
persistent
|
Converts the autocreated SAN port channel to a persistent SAN port channel
|
None
EXEC mode
|
Release
|
Modification
|
|
4.0(0)N1(1a)
|
This command was introduced.
|
This command is not reversible. A user-created channel group cannot be converted to an autocreated channel group.When the san-port-channel persistent command is applied to an autocreated channel group, the channel group number does not change and the properties of the member ports change to those of a user-created channel group. The channel mode remains active.
This example shows how to change the properties of an autocreated channel group to a persistent channel group:
|
Command
|
Description
|
|---|---|
|
san-port-channel protocol
|
Enables the SAN port channel protocol.
|
|
show interface port-channel
|
Displays SAN port channel interface information.
|
|
show port-channel
|
Displays SAN port channel information.
|