member (zone configuration mode)

To add a member name to a Fibre Channel zone, use the member command. To remove a member name from a zone, use the no form of this command.

member { device-alias aliasname | domain-id domain-id port-number port | fcalias alias-name | fcid fc-id | fwwn fwwn-id | interface fc slot / port [ domain-id domain-id | swwn swwn-id ] | pwwn pwwn-id [ lun lun-id ] | symbolic-nodename nodename }

no member { device-alias aliasname | domain-id domain-id port-number port | fcalias alias-name | fcid fc-id | fwwn fwwn-id | interface fc slot / port [ domain-id domain-id | swwn swwn-id ] | pwwn pwwn-id [ lun lun-id ] | symbolic-nodename nodename }

Syntax Description

device-alias aliasname
Specifies the member device alias. The name can be a maximum of 64 characters.
domain-id domain-id
Specifies the member domain ID. The range is from 1 to 239.
port-number port
Specifies the member port number. The range is from is 0 to 255.
fcalias alias-name
Specifies a Fibre Channel alias name. The name can be a maximum of 64 characters.
fcid fc-id
Specifies the member FC ID. The format is 0 x hhhhhh, where h is a hexadecimal digit.
fwwn fwwn-id
Specifies the member fWWN ID. The format is hh : hh : hh : hh : hh : hh : hh : hh, where h is a hexadecimal digit.
interface fc slot / port
Specifies the member interface ID and its slot number and port number.
swwn swwn-id
(Optional) Specifies the member sWWN ID. The format is hh : hh : hh : hh : hh : hh : hh : hh, where h is a hexadecimal digit.
pwwn pwwn-id
Specifies the member pWWN ID. The format is hh : hh : hh : hh : hh : hh : hh : hh, where h is a hexadecimal digit.
lun lun-id
(Optional) Specifies the member Logical Unit Number (LUN) ID. The format is 0 x hhhh [ : hhhh [ : hhhh [ : hhhh ]]], where h is a hexadecimal digit.
symbolic-nodename nodename
Specifies the member symbolic node name. The name can be a maximum of 255 characters.

Command Default

None

Command Modes

Zone set zone configuration mode and zoneset-zone configuration mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Usage Guidelines

Create a zone set zone member only if you need to add member to a zone from the zone set prompt.

Examples

This example shows how to add a member to a zone called zs1 on VSAN 1:

switch(config)# zone name zs1 vsan 1
switch(config-zone)# member fcid 0x111112
 

This example shows how to add a zone to a zone set called Zoneset1 on VSAN 1:

switch(config)# zoneset name ZoneSet1 vsan 1
switch(config-zoneset-zone)# member fcid 0x111112
 

This example shows how to assign a Fibre Channel interface member into a zone:

switch(config)# zoneset name ZoneSet1 vsan 1
switch(config-zoneset-zone)# member interface fc 3/1
 

This example shows how to delete the specified device from a zone:

switch(config-zoneset-zone)# no member interface fc 3/1
 

Related Commands

Command
Description
zoneset (configuration mode)
Specifies a name for a zone set.
zone name (zone set configuration mode)
Configures a zone in a zone set.
show zoneset
Displays zone set information.