show ip eigrp

To display a summary of the Enhanced Interior Gateway Routing Protocol (EIGRP) processes, use the show ip eigrp command.

show ip eigrp [ instance-tag ]

Syntax Description

instance-tag
(Optional) Name of the EIGRP instance. The instance-tag can be any case-sensitive, alphanumeric string up to 20 characters.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to display all the EIGRP instances:

switch# show ip eigrp
IP-EIGRP AS 65535 ID 3.1.1.1 VRF default
Process-tag: Test1
Status: running
Authentication mode: none
Authentication key-chain: none
Metric weights: K1=1 K2=0 K3=1 K4=0 K5=0
IP proto: 88 Multicast group: 224.0.0.10
Int distance: 90 Ext distance: 170
Max paths: 8
Number of EIGRP interfaces: 8 (0 loopbacks)
Number of EIGRP passive interfaces: 0
Number of EIGRP peers: 8
Redistributing:
direct route-map SVI-EIGRP
Graceful-Restart: Enabled
Stub-Routing: Disabled
NSF converge time limit/expiries: 120/0
NSF route-hold time limit/expiries: 240/0
NSF signal time limit/expiries: 20/0
Redistributed max-prefix: Disabled
switch#
 

Related Commands

Command
Description
router eigrp
Configures an EIGRP instance.
show running-config eigrp
Displays EIGRP running configuration information.