Firmware Version 9.2(2) for Cisco Cius SP

The 9.2(2) firmware image within the installation program supports the SIP protocol for the following Cisco Unified Devices:

·        Cisco Cius SP

This firmware version is supported on Cisco Unified Communications Manager 7.1(5), 8.5(1), 8.6(1) and above.

 

Release Notes and documentation

For a list of Resolved Problems and Known Problems with this firmware version, you can obtain the Cisco Cius SP Firmware Release Notes by clicking the following URL:

http://www.cisco.com/en/US/docs/voice_ip_comm/ccmcd/rel_notes/9_2_2/cius-rel_notes-922.html

Cisco Cius SP User Guide and Quick Start:

http://www.cisco.com/en/US/products/ps11156/products_user_guide_list.html

Cisco Cius SP Administration Guide:

http://www.cisco.com/en/US/products/ps11156/prod_maintenance_guides_list.html 

 

Installing the Firmware Load

Before using the Cisco Cius SP with Cisco Unified Communications Manager Release 7.1(5), 8.5(1), 8.6(1) and above, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.

The 9.2(2) installation programs for the Cisco Cius SP are listed below.

Note: For the Cisco Cius SP, you should not add the .loads extension to the firmware version name in the Cisco Unified Communications Manager database.

 

Cisco Cius SP Installation Instructions

Perform the following procedure:

1.      Click the following URL: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240.

2.      Log in to the Tools and Resources Download Software page.

3.      Choose the Unified Communications Applications.

4.      Choose the Unified Communications Mobility.

5.      Choose Cisco Cius.

6.      Choose Cisco Cius SP.

7.      Choose 9.2(2) under the Latest Releases folder.

8.      Download the files that are listed in Table 1 to your hard drive.

Table 1: Cisco Cius SP Firmware Loads

Cisco Unified
IP Phone Model

Cisco Unified Communications Manager Version

Installer name on Software Page

MD5 hash

Cius SP

7.1(5), 8.5(1), 8.6(1) and above

cmterm-ciusSP.9-2-2-49.cop.sgn

2c:16:23:21:c5:fa:c1:27:84:d0:73:42:99:98:a1:2b

 

9.      Using your web browser, log in to the Cisco Unified OS Administration web page.

10.  Under the Software Upgrades menu, select Install/Upgrade.

11.  Fill in the appropriate values in the Software Location section for the files you downloaded above and click Next.

12.  In the Options/Upgrades drop-down box, select a file you downloaded above and click Next.

13.  After validating the MD5 has the correct value, click Next.

14.  Check the installation log and verify the file was installed successfully.

15.  To install another file, click Install Another and repeat steps 5 – 8.

16.  Log in to Cisco Unified Serviceability web page.

17.  Under the Tools menu, select Control Center - Feature Services.

18.  Select the Cisco Tftp service, and click the Restart button.

 

Verifying the Firmware Load

You may verify the installation of the firmware as follows:

1.      Log in to the Cisco Unified CM Administration web page.

2.      Under the Device menu, select Device Settings > Device Defaults.

3.      Verify the new firmware image name is listed in the Dual Bank Information section Inactive Load Information field for the Cisco Cius SP.

 

Cisco Cius SP Alternate Firmware Format

The Cisco Cius SP firmware version 9.2(2) is also supplied in a zip file as an alternative in case a Cisco Unified Communications Manager is not available to load the installer program.  The name of this file is: cmterm-ciusSP.9-2-2-49.zip.

After unzipping the firmware files, they should be manually copied to the appropriate directory on the TFTP server.


© 2011 Cisco Systems, Inc.  All Rights Reserved.