Firmware Version 9.2(1)SR2 for Cisco Cius
The 9.2(1)SR2
firmware image within the installation program supports the SIP protocol for
the following Cisco Unified Devices:
·
Cisco
Cius
This firmware version is supported on Cisco Unified
Communications Manager 7.1(5), 8.5(1), 8.6(1) and above.
Release Notes and documentation
For a list of Resolved Problems and Known Problems
with this firmware version, you can obtain the Cisco Cius
Firmware Release Notes by clicking the following URL:
http://www.cisco.com/en/US/docs/voice_ip_comm/ccmcd/rel_notes/9_2_1/cius-rel_notes-921_sr2.html
Cisco Cius User Guide and
Quick Start:
http://www.cisco.com/en/US/products/ps11156/products_user_guide_list.html
Cisco Cius Administration
Guide:
http://www.cisco.com/en/US/products/ps11156/prod_maintenance_guides_list.html
Installing the Firmware Load
Before using the Cisco Cius
with Cisco Unified Communications Manager Release 7.1(5), 8.5(1), 8.6(1)
and above, you must install the latest firmware on all Cisco Unified
Communications Manager servers in the cluster.
The 9.2(1)SR2
installation programs for the Cisco Cius are listed
below.
Note: For the Cisco Cius,
you should not add the .loads extension to the firmware version
name in the Cisco Unified Communications Manager database.
Cisco Cius
Installation Instructions
Perform the following procedure:
1.
Click
the following URL: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240.
2.
Log
in to the Tools and Resources Download Software page.
3.
Choose
the Unified Communications Applications.
4.
Choose
the Unified Communications Mobility.
5.
Choose
Cisco Cius.
6.
Choose
Cisco Cius Wi-Fi.
7.
Choose
9.2(1)SR2 under the Latest
Releases folder.
8.
Download
the files that are listed in Table 1 to your hard drive.
Table 1: Cisco Cius Firmware Loads
Cisco
Unified |
Cisco
Unified Communications Manager Version |
Installer
name on Software Page |
MD5
hash |
Cius |
7.1(5),
8.5(1), 8.6(1) and above |
cmterm-cius.9-2-1SR2-21SEC.cop.sgn |
19:63:4a:3d:54:36:34:8f:69:81:02:09:a2:c5:e2:09 |
9.
Using
your web browser, log in to the Cisco Unified OS Administration web
page.
10.
Under
the Software Upgrades menu, select Install/Upgrade.
11.
Fill
in the appropriate values in the Software Location section for the files
you downloaded above and click Next.
12.
In
the Options/Upgrades drop-down box, select a file you downloaded above
and click Next.
13.
After
validating the MD5 has the correct value, click Next.
14.
Check
the installation log and verify the file was installed successfully.
15.
To
install another file, click Install Another and
repeat steps 5 – 8.
16.
Log
in to Cisco Unified Serviceability web page.
17.
Under
the Tools menu, select Control Center - Feature Services.
18.
Select
the Cisco Tftp service, and click the Restart
button.
Verifying the Firmware Load
You may verify the installation of the firmware as
follows:
1.
Log
in to the Cisco Unified CM Administration web page.
2.
Under
the Device menu, select Device Settings > Device Defaults.
3.
Verify
the new firmware image name is listed in the Dual Bank Information
section Inactive Load Information field for the Cisco Cius.
Cisco Cius
Alternate Firmware Format
The Cisco Cius firmware
version 9.2(1)SR2 is also supplied
in a zip file as an alternative in case a Cisco Unified Communications Manager
is not available to load the installer program. The name of this file is:
cmterm-cius.9-2-1SR2-21SEC.zip.
After unzipping the firmware files, they should be
manually copied to the appropriate directory on the TFTP server.
© 2011 Cisco Systems, Inc. All Rights
Reserved.