08/01/2011 CVGenericPackage Device Package Incremental Installation Release 1.9 Supported by: * CiscoView 6.1.6 or later This readme file includes the following sections: * What's New? * Devices Supported * Cards Supported * Dependent Packages * ZIP File (*.zip) * Bug Fixes * Device Package Caveats * Installation Instructions What's New? =========== No new devices supported in this release. Version incremented for Cat6000IOS modules support. Devices Supported ================= None Cards Supported =============== Version 1.0 ----------- * SPA-1XCHSTM1/OC3 * SPA-2x1GE-V2 * SPA-5x1GE-V2 * SPA-10X1GE-V2 * 7600-ES10-GE3C * 7600-ES10-GE3CXL * 7600-ES20-GE3C * 7600-ES20-GE3CXL * RSP720-3C * RSP720-3C-XL-GE * WS-X6716-10GE * SPA-1XTENGEXFP (Untested) * SPA-1X10GE-L-V2 (Untested) Version 1.1 ----------- + ASR1000-RP1 : Cisco ASR1000 Route Processor 1 ASR1000-RP1 + ASR1000-SIP10 : Cisco ASR-1000 SPA Interface Processor 10 + ASR1000-ESP10 : Cisco ASR-1000 Embedded Services Processor 10Gbps SHARED PORT ADAPTERS SUPPORTED: * SPA-8XCHT1/E1 (Untested) * SPA-4XCT3/DS0 (Untested) * SPA-2XCT3/DS0 (Untested) * SPA-2XT3/E3 (Untested) * SPA-4XT3/E3 (Untested) * SPA-4XT-Serial * SPA-4X1FE-TX-V2 * SPA-8X1FE-TX-V2 (Untested) * SPA-8X1GE-V2 (Untested) * SPA-2XOC3-POS (Untested) * SPA-4XOC3-POS (Untested) * SPA-1XOC12-POS Version 1.2 ----------- * SPA-2x1GE-V2 * SPA-5x1GE-V2 * SPA-8x1GE-V2 * SPA-2xCHOC12/DS0 Version 1.3 ----------- * RSP720-3C-10GE * RSP720-3CXL-10GE (Untested) Version 1.4 ----------- * 7600-ES+2TG3C (Untested) * 7600-ES+2TG3CXL (Untested) * 7600-ES+4TG3C (Untested) * 7600-ES+4TG3CXL (Untested) * 7600-ES+20G3C * 7600-ES+20G3CXL (Untested) * 7600-ES+40G3C (Untested) * 7600-ES+40G3CXL * 76-ES+XT-2TG3CXL * 76-ES+XT-2TG3C (Untested) * 76-ES+XT-4TG3CXL (Untested) * 76-ES+XT-4TG3C (Untested) * 76-ES+T-20G3CXL (Untested) * 76-ES+T-40G3CXL (Untested) * 76-ES+T-2TG3CXL (Untested) * 76-ES+T-4TG3CXL (Untested) * 76-ES+XC-20G3C (Untested) * 76-ES+XC-20G3CXL (Untested) * 76-ES+XC-40G3C (Untested) * 76-ES+XC-40G3CXL (Untested) Version 1.5 ----------- * ASR1001 Routing Processor * ASR1001 Embedded Services Processor * ASR1001 SPA Interface Processor INTEGRATED DATA CARDS SUPPORTED: * ASR1001 Harddisk Integrated Daughter Card * ASR1001 2XOC3Pos Integrated Daughter Card * ASR1001 4XT3 Integrated Daughter Card Version 1.6 ----------- * ASR1002F Embedded Services Processor * ASR1002F SPA Interface Processor 10 (SIP-10) * ASR1000 SPA Interface Processor 40 (SIP-40) * ASR1000 Route Processor 2 (RP-2) * ASR1000 Embedded Services Processor 40-Gbps (ESP-40) Note: "(*)" indicates new support in this release. "Untested" indicates Support for the hardware is given but not validated. Dependent Packages =================== * Routershare.cv50.v1-10.zip * SwitchAddlets.cv50.v1-34.zip ZIP File (*.zip) ================= Filename: CVGenericPackage.cv50.v1-9.zip Size: 1,206,615 bytes Bug Fixes ========== CSCtc56449 CSCsy93750 (Untested) CSCtb62511 (Untested) Note: "Untested" indicates fix is given but not validated. Fix is validated with customer from TAC case. Device Package Caveats ============================== CSCtc56063 Installation Instructions ============================ Before you install this package, the following packages must first be installed, in the order below: 1 Routershare.cv50.v1-10.zip 2. SwitchAddlets.cv50.v1-34.zip or later After downloading CVGenericPackage.cv50.v1-9.zip to a temporary location ("/tmp", for Example), do the following to install the package: * For CiscoView 6.1.X on Solaris/Windows Server from GUI 1. From CiscoWorks homepage, Select Common Services > Software Center > Device Updates. The Device Updates page appears. 2. Select the CiscoView check box , then click Check for Updates. The Source Location page is displayed. You can check for updates at Cisco.com or at a Server. 3. Check for updates. - To check for updates at Cisco.com, select the Cisco.com radio button. - To check for updates from a server: a. Select the Enter Server Path radio button. b. Enter the path or browse to the location using the Browse tab. Note: If the source location is Cisco.com, make sure the credentials are configured at Server > Security > Cisco.com Connection Management > User setup. 4. Click Next. The Available Packages and Installed Packages page is displayed. 5. Select CVGenericPackage.cv50.v1-9.zip and then click Next. The Device Update page appears. You can choose to install device packages or download device packages. - To install device packages, select the Install Device Packages radio button. - To download device packages, select the Download Device Packages radio button. If you select Install Device Packages do the following: - Click Next. A summary of your inputs is displayed. - Click Finish. A warning message pops up to tell you that the daemons are restarted. - Click OK to continue with installation. If you select download Device Packages, - Enter the folder in File Selection field or click Browse to select the folder. - In Scheduling pane, choose the Run Type (Immediate or Once), Date, and Time. - In the Job Info field, provide the Job Description and E-mail ID. * For CiscoView 6.1.X on Solaris/Windows Server from CLI After downloading CVGenericPackage.cv50.v1-9.zip to a temporary location on the server (for example, "/tmp" for Solaris or "c:\tmp" for Windows), issue the following command to install the package: (Solaris) /bin/PSUCli.sh -p cvw -install -src /tmp where NMSROOT is the directory in which CiscoView is installed. For example: /opt/CSOpx/bin/PSUCli.sh -p cvw -install -src /tmp CVGenericPackage (Windows) \bin\PSUCli.bat -p cvw -install -src c:\tmp For example: C:\Program Files\bin\PSUCli.bat -p cvw -install -src c:\tmp CVGenericPackage * For LMS 4.0 (or above) CiscoView on Linux/Solaris/Windows Server from GUI 1. From CiscoWorks homepage, Select Admin > Software Center > Device Updates. The Device Updates page appears. 2. Select the CiscoView check box, then click Check for Updates. The Source Location page is displayed. You can check for updates at Cisco.com or at a Server. 3. Check for updates. - To check for updates at Cisco.com, select the Cisco.com radio button. - To check for updates from a server: a. Select the Enter Server Path radio button. b. Enter the path or browse to the location using the Browse tab. Note: If the source location is Cisco.com, make sure the credentials are configured at Admin > System > Cisco.com Settings > User Account Setup. 4. Click Next. The Available Packages and Installed Packages page is displayed. 5. Select CVGenericPackage.cv50.v1-9.zip and then click next. The Device Update page appears. You can choose to install device packages or download device packages. - To install device packages, select the Install Device Packages radio button. - To download device packages, select the Download Device Packages radio button. If you select Install Device Packages do the following: - Click Next. A summary of your inputs is displayed. - Click Finish. A warning message pops up to tell you that the daemons are restarted. - Click OK to continue with installation. If you select download Device Packages, - Enter the folder in File Selection field or click Browse to select the folder. - In Scheduling pane, choose the Run Type (Immediate or Once), Date, and Time. - In the Job Info field, provide the Job Description and E-mail ID. NOTE: ==== * Linux OS is supported from LMS 4.1 only.