Date:24th August, 2009

Cisco 3800 Series Incremental Installation Release 9.0 

Supported for:

* CiscoView 6.1.6 and above for CiscoWorks 

This README file has the following sections:

* What's New?
* Prerequisites
* Devices Supported
* Modules Supported
* MIB Files
* ZIP File
* Cisco IOS Software Releases
* NMIDB Support
* Caveats
* Device Package Installation Instructions

WHAT'S NEW?
===========

This Cisco 3800 series incremental release includes support for the following
device(s).

  C3825-NOVPN
  C3845-NOVPN

The following cards are compatible with  Cisco 3800 series routers:
 
  HWIC-1T 
  HWIC-2T
  HWIC-4SHDSL
  HWIC-1DSU-T1
    
Note:The above cards are supported in  NGMARShare.

PREREQUISITES
=============

 *  Dependent Package:
    +  NGMARShare.cv50.v1-9.zip or later.


DEVICES SUPPORTED
=================

This release supports Cisco 3800 series routers, Cisco 3825-NOVPN and Cisco 3845-NOVPN.
 

MODULES SUPPORTED
=================

For supported module list please refere the  NGMARShare.cv50.v1-9.readme or later.


MIB FILES
=========

SNMP MIB files used in Cisco devices are available at the following locations:

*ftp://ftp.cisco.com/pub/mibs/v1 
*ftp://ftp.cisco.com/pub/mibs/v2

To find out versions of the IOS support specific MIBs for each Cisco
product family, please refer to: ftp://ftp.cisco.com/pub/mibs/supportlists .


ZIP FILE
========

The zip file, Rtr3800.cv50.v9-0.zip allows you to manage the Cisco 3800 Series
Routers using CiscoView.

Size of the zip file : 378,637 bytes


CISCO IOS Software Release
==========================

Cisco IOS Release 12.4(22)-YB1 or later are supported for  Cisco 3825-NOVPN and Cisco 3845-NOVPN devices.



NMIDB Support
=============

 * NMIDB support is available from the package: nmidb.1.0.090.zip for  Cisco 3825-NOVPN and Cisco     3845-NOVPN devices.
   
   Note:NMIDB won't be shipped with this release.

CAVEATS
=======
 None.


DEVICE PACKAGE INSTALLATION INSTRUCTIONS
========================================

Before installing this package, NGMARShare.cv50.v1-9.zip (or later) package must be
installed first,

After downloading the package zip file Rtr3800.cv50.v9-0.zip from
CCO to a temporary location (say '/tmp') in the server, do the following:


For CiscoWorks on Solaris/Windows Server from GUI - CiscoView 6.1.x
  - From CiscoWorks homepage, Select Common Services > Software Center > Device Updates.
    The Device Updates page appears.

  -  Select the check box corresponding to the CiscoView, then click Check for Updates.
     The Source Location page is displayed. You can check for updates at Cisco.com
     or at a Server.

  - To check for updates at Cisco.com:
       a. Select the Cisco.com radio button.
  - To check for update from a Server:
       a. The Device Package should be present on the Server.
       b. Select the Enter Server Path radio button.
       c. Enter the path or browse to the location using the Browse tab.
     Note: If the source location is Cisco.com, make sure the credentials are configured
     in the Server > Security > Cisco.com Connection Management > User Setup.

  - Click Next. The Available Packages and Installed Packages page is displayed.

  - Select the package name that you wish to update, then click Next.
     The Device Update page appears. You can choose to install device packages or download
     device packages.
        - To install device packages, select the Install Device Packages radio button.
        - To download device packages, select the Download Device Packages radio button.
     If you select Install Device Packages do the following:
        - Click Next. A summary of your inputs is displayed.
        - Click Finish. A warning message pops up to tell you that the daemons are restarted.
        - Click OK to continue with installation.
     If you select Download Device Packages,
        - Enter the folder in File Selection field or click Browse to select the folder.
        - In Scheduling pane, choose the Run Type (Immediate or Once), Date, and Time.
        - In the Job Info field, provide the Job Description and E-mail ID.

For CiscoWorks on Solaris Server from CLI - CiscoView 6.1.x
   Issue the following command on the server to install the package.
    - <NMSROOT>/bin/PSUCli.sh -p cvw -install -src /tmp <package name>
     For example:
     /opt/CSOpx/bin/PSUCli.sh -p cvw -install -src /tmp Rtr3800

For CiscoWorks on Windows Server from CLI - CiscoView 6.1.x
   Issue the following command on the server to install the package.
    - <NMSROOT>\bin\PSUCli.bat -p cvw -install -src C:\tmp <package name>
     For example:
     C:\PROGRA~1\CSCOpx\bin\PSUCli.bat -p cvw -install -src C:\tmp Rtr3800