Cisco Unified CallManager Device Package 5.1.3
(8104-1)
Release Notes
These Device Package
release notes contain important information about installation procedures and
resolved caveats for Cisco Unified CallManager Device
Package release 5.1.3(8104-1).
1. Note: Before you install this Cisco Unified CallManager Device Package, Cisco recommends that you review the “Important Notes” section for information about issues that may affect your system.
Determining the Software Version
Compatibility Matrix and Supported Upgrades
Important Notes & Recommendations
Resolved Caveats for Cisco Unified CallManager Device
Package
Locale Installer for Cisco Unified CallManager
Cisco Product Security Overview
Reporting Security Problems in Cisco Products
Obtaining Technical Assistance
Cisco Technical Support Website
Definitions of Service Request Severity
Obtaining Additional Publications and Information
This document provides installation instructions
for this
2.
Note: Failure to follow installation
instructions as described may result in inconsistent
Make sure that you
install and configure this release of
You can determine the
version of
This
5.1(3) |
3.
Note: Review the Show/Software on the
4.
NOTE: Be aware that the release of
5. Endpoint firmware: http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser Endpoint documentation, including release notes: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/engli
MD5: cb:dc:cd:a6:01:ef:d6:e9:e0:6e:57:12:08:3b:d4:f9
Cisco
Unified CallManager Device Package 5.1.3(8104-1) includes the following
firmware versions:
Device-type |
Load-name |
Version |
3911_3951-sip |
3911_3951-sip.8-1-2 |
8.1(2.0) |
6608 |
6608-4.0.0.32-mgcp |
D00404000032.bin/D0054322.bin |
6608cfb |
6608cfb-4.0.0.03-sccp |
C00104000003.bin/C002E031.bin |
6608mtp |
6608mtp-4.0.0.06-sccp |
M00104000006.bin/M002E031.bin |
6624 |
6624-4.0.0.13-mgcp |
A00204000013.bin/A0034322.bin |
7902 |
7902-8.0.2-sccp |
8.0(2.0) |
7905 |
7905-8.0.1.1-sip |
8.0(1.1) |
7905 |
7905-8.0.2-sccp |
8.0(2.0) |
7910 |
7910-5.0.7.0-sccp |
5.0(7.0) |
7911_7906-sccp |
7911_7906-sccp.8-5-3 |
8.5(3.0) |
7911_7906-sip |
7911_7906-sip.8-5-3 |
8.5(3.0) |
7912 |
7912-8.0.1.1-sip |
8.0(1.1) |
7912 |
7912-8.0.2-sccp |
8.0(2.0) |
7914-sccp |
7914-sccp.5-0-4 |
5.0(4.0) |
7915 |
7915.1-0-4 |
1.0(4.0) |
7916 |
7916.1-0-4 |
1.0(4.0) |
7920-sccp |
7920-sccp.3-0-2 |
3.0(2.0) |
7921-sccp |
7921-sccp.1-3-3 |
1.3(3.0) |
7925-sccp |
7925-sccp.1-3-3 |
1.3(3.0) |
7931-sccp |
7931-sccp.8-5-3 |
8.5(3.0) |
7935-sccp |
7935-sccp.3-2-19 |
3.2(19.0) |
7936-sccp |
7936-sccp.3-3-20 |
3.3(20.0) |
7937-sccp |
7937-sccp.1-3-4 |
1.3(4.0) |
7940-7960 |
7940-7960-8.12.00-sip |
8.12(0.0) |
7940-7960-sccp |
7940-7960-sccp.8-1-2 |
8.1(2.0) |
7941_7961-sccp |
7941_7961-sccp.8-5-3 |
8.5(3.0) |
7941_7961-sip |
7941_7961-sip.8-5-3 |
8.5(3.0) |
7942_7962-sccp |
7942_7962-sccp.8-5-3 |
8.5(3.0) |
7942_7962-sip |
7942_7962-sip.8-5-3 |
8.5(3.0) |
7945_7965-sccp |
7945_7965-sccp.8-5-3 |
8.5(3.0) |
7945_7965-sip |
7945_7965-sip.8-5-3 |
8.5(3.0) |
7970_7971-sccp |
7970_7971-sccp.8-5-3 |
8.5(3.0) |
7970_7971-sip |
7970_7971-sip.8-5-3 |
8.5(3.0) |
7975-sccp |
7975-sccp.8-5-3 |
8.5(3.0) |
7975-sip |
7975-sip.8-5-3 |
8.5(3.0) |
7985 |
7985-4-1-7-0-sccp |
4.1(7.0) |
ata |
ata-3.2.4-sccp |
3.2(4.0) |
·
To minimize call-processing interruptions during the
upgrade process, make sure that all servers are running the same version of
·
Make sure that the servers are online
before you begin this Device Package installation.
6.
Note:
Procedure
NOTE: Apply this patch to all of your
When applying this Device Package to enable new
device support, a cluster-wide reboot is required for those devices to register
successfully. A clusterwide reboot IS NOT
required when running to update existing firmware/support.
7.
Note: In order to
change the loads manually, you do NOT need to reinstall this Device Package.
The new files will be present in the TFTP folder. Go to CCMAdmin->Device->Device
Settings->Device Defaults and manually change the name of the load file (for
specific device(s)) to the new load and click UPDATE.
Note: If
you are rebooting the cluster, the next step does not need to be done.
8.
The
The Device Package cannot be uninstalled. However, you can change
the device defaults for devices you wish to roll back. From the
Log
File Information
The system creates log files which may be viewed via the
following process:
·
Using Cisco Unified CallManager Serviceability Real-Time Monitoring Tool,
select Trace & Log Central\Remote Browse\Install and Upgrade Logs.
·
Using Cisco Unified CallManager Serviceability Real-Time Monitoring Tool,
select Trace & Log Central\Collect Files\Install and Upgrade Logs.
·
Using Cisco Unified CallManager Serviceability Real-Time Monitoring Tool,
select Trace & Log Central\Query Wizard\Install and Upgrade Logs.
·
Using Cisco Unified CallManager Serviceability Real-Time Monitoring Tool,
select Trace & Log Central\Schedule Collection\Install
and Upgrade Logs.
List of Fixes in this
5.1.3(8104-1) Dev Pack:
5.1.(3.8102-1) |
|
Check in BKEM
loads in to CUCM Branch companied the 853 phone load |
|
7937 134 CUCM
vob check in defect |
5.1.(3.8101-1) |
|
Checking in
phone load 853 firmware |
|
Checkin SCCP 812 79407960 firmware into callmanager |
5.1.(3.7109-1) |
|
Peer File
sharing Option is missing On Product specific conf on 794262 |
5.1(3.7108-1) |
|
Update Cisco
7921 7925 support files for Release 133 |
|
Phone with 2
modules 7915 can have only 36 lines |
|
Noise
Reduction causes saturated speech on Handsfree Send
|
|
Noise
Reduction causes saturated speech on Handsfree Send
|
|
Placeholder
of CIA1859 HeadsetHandset Monitor |
|
7911 Turbo
CR2 LCD flicker in normal condition |
5.1(3.7107-1) |
|
Checkin Cisco 7925 firmware version 133 to CUCM |
|
JPNKatakana strings used on 7937s QRT EM CallBack and Corp Dir |
5.1.(3.7105-1) |
|
Check in 794060 SIP P0S381200 COP files to Clearcase for Linux CCM |
5.1.(3.7103-1) |
|
Devpack for 513 CUCM doesnt
include Log Calls QED |
5.1.(3.7101-1) |
|
Misspelling
in Minimum Ring Volume field |
|
844 Phone
load check in to CUCM branch |
5.1.(3.6104-1) |
|
Check-in ATA
SCCP firmware version 3.2(4) to CUCM |
|
844 QED files
check in |
5.1.(3.6103-1) |
|
Checkin SCCP 811 79407960 firmware into callmanager |
|
7937 1.3(3)
CUCM vob check in defect |
|
Check in
794060 SIP P0S3081100 COP files to Clearcase for
Linux CCM |
|
Check-in
Cisco 7921 firmware version 1.3(2) to CUCM |
|
7921 not
updating phone load during ES install |
5.1.(3.6102-1) |
|
Check in
794060 SIP P0S3081100 COP files to Clearcase for
Linux CCM |
|
Check-in
Cisco 7921 firmware version 1.3(2) to CUCM |
|
7921 not
updating phone load during ES install |
5.1.(3.6101-1) |
|
7940s and
7960s cannot register with the 810 SIP phone load |
|
Error in IP
Phone Rules file causes sidecar to not register to CUCM |
5.1.(3.5107-2) |
|
Check in
794060 SIP P0S3081000 COP files to Clearcase for
Linux CCM |
|
SWTno secure tone defination in
g3tonesxml file |
5.1.(3.5106-1) |
|
7936 3.3(20)
CUCM vob check in defect |
5.1.(3.5105-1) |
|
7985 -- Checkin new image 4.1.7 to CUCM branches |
|
Update Cisco
7921 & 7925 support files for Release 1.3.2 |
5.1.(3.5104-1) |
|
Adding 842
phone firmware |
|
Adding 7937
1.3(2) CUCM vob check in |
|
Adding 842
QED features |
5.1.(3.5103-1) |
|
Checking in bkem(7916/7915) 1-0-3 firmware |
|
Add remote
hold icon to 7914 |
5.1.(3.5102-1) |
|
Check-in
Cisco 7925 firmware version 1.3(1) to CUCM |
|
Checkin 8010 firmware into CUCM vob
|
5.1.(3.4114-2) |
|
Update 7925
CSV & XML files for FCS |
5.1.(3.4113-1) |
|
Adding
Display Refresh Flicker Correction feature |
5.1.(3.4112-1) |
|
7915 102
check in again |
|
Adding 3rd
Gen firmware 841SR1 to CUCM |
5.1.(3.4108-1) |
|
Adding 841 to
CUCM |
5.1.(3.4107-1) |
|
Check-in
Cisco 7921 firmware version 1.2(1) to CUCM |
|
Update 7921
support files for Release 1.2 |
5.1.(3.4106-1) |
|
7970 JPN half
width katakana help shown when menu items are followed |
5.1.(3.4105-1) |
|
3.3(16) and
3.2(19) CCM vob commit |
|
Checking in bkem7916 102SR1 firmware |
5.1.(3.4102.1) |
|
7936
Restricted Access to the phones setting menu QED Change |
5.1(3.4101.1) |
|
Checkin phone load 8.1(2) in CM Branches |
5.1(3.3105.1) |
|
Add 7925
support files (CSV, XML, GIF) to CUCM |
5.1(3.3103.1) |
|
7985- incorrrect load302.txt file in 4.1(6) cop |
5.1(3.3101.1) |
|
Checkin 7985 4.1(6) copfiles to
all relevant UCM branches |
|
6608 Fix help
file URL for CCM 60 |
5.1.3.2117-1 |
|
Adding 835
phone firmware to CUCM |
|
Remove the
User Guide download link for 7936 |
5.1.3.2113-1 |
|
Merge 794060
SCCP phone load 8090 to CallManager branch |
5.1.3.2112-1 |
|
7937 121 CUCM
vob check in defect |
|
No Peer
Firmware Sharing field for 7975/7965 in CUCM ES 5.1.2.3127-1 |
5.1.3.2111-1 |
|
Locale not
displayed properly after changing from Japanese to English |
5.1.3.2109-1 |
|
Remove User
Guide download for 7921 for CM versions without User Guides |
5.1.3.2107-1 |
|
Device Package installation reliabilty enhancements |
|
Remove the
User Guide download link for Phones without 5x User Guides |
|
device
definition files need to be checked in |
5.1.3.2106-1 |
|
Adding
8.3(4)SR1 phone firmware to CUCM |
5.1.3.2105-1 |
|
7937 111 CUCM
vob check in defect |
5.1.3.2102-1 |
|
Check-in
Cisco 7921 firmware version 1.1(1) to CallManager |
|
PLKs on 83 phones have labels when talking to pre60 CCM |
5.1.3.1114-1 |
|
Update 7921
CSV and XML files for Release 1.1 FCS |
5.1.3.1113-1 |
|
E1 Port on
WS6608 542 not replying to external ping ICMP packets |
5.1.3.1111-1 |
|
Check-in
Cisco 7921 firmware version 1.0(5) to CallManager |
|
3911 CLI
command shows wrong network locale information |
5.1.3.1109-1 |
|
7985-Need to checkin cmterm_7985.4-1-5-0.bin to all relevant CUCM
branch |
5.1.3.1108-1 |
|
7911 LCD
glimmer flicker when neon light is on |
5.1.3.1107-1 |
|
Adding 833Sr2
to all CUCM builds |
|
Removing eHook feature from 1106 31 4161 and 7071 phone models |
5.1.3.1104-1 |
|
Adding 833 to
CUCM |
|
Adding 833
features |
|
Update the
QED setting for the 7937 phone guide |
|
Extra button
templates are displayed for 7937 |
5.1.3.1103-2 |
|
Offcluster HTTP Requests Do Not Close Connection |
|
Faststart used with CTI RP can cause mediaexchange
to fail |
|
MN User
cannot remove MP credentials |
5.1.3.1103-1 |
|
Checkin enabler of 3911 in CM branches |
|
7985 Can not
disable advertisement of g.722 codec |
|
Call Manager
changes MGCP call ID value from CRCX to MDCX for same call |
5.1.3.1102-1 |
|
Check-in
Cisco 7921 firmware version 1.0(4) to CallManager |
|
Loosing words
in ibutton help when wrapping text |
For optimal performance, be sure
that you use the
Each release of
9.
Note: When using locales,
Obtaining Documentation
You can access the most current
http://www.cisco.com/univercd/home/home.htm
You can access the
You can access international
http://www.cisco.com/public/countries_languages.shtml
For additional
information about
To access the
documentation suite for voice products, navigate to the following URL: http://www.cisco.com/univercd/cc/td/doc/product/voice/.
To access the latest
software upgrades and related documentation for
Registered
http://www.cisco.com/en/US/partner/ordering/
http://www.cisco.com/go/marketplace/
You can find instructions for ordering documentation
at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order
Documentation Feedback
You can send comments about technical documentation
to bug-doc@cisco.com.
You can submit comments by using the response card
(if present) behind the front cover of your document or by writing to the
following address:
Attn: Customer Document Ordering
We appreciate your comments.
Cisco Product Security Overview
From this site, you can perform these tasks:
A current list of security advisories and notices
for
If you prefer to see advisories and notices as they
are updated in real time, you can access a Product Security Incident Response
Team Really Simple Syndication (PSIRT RSS) feed from this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
We
encourage you to use Pretty Good Privacy (PGP) or a compatible product to
encrypt any sensitive information that you send to
http://pgp.mit.edu:11371/pks/lookup?search=psirt%40cisco.com&op=index&exact=on
In an
emergency, you can also reach PSIRT by telephone:
Obtaining Technical Assistance
For all customers, partners, resellers, and
distributors who hold valid
The
http://www.cisco.com/techsupport
Access to all tools on the
10.
Note: Use
the
Using the online TAC Service Request Tool is the
fastest way to open S3 and S4 service requests. (S3 and S4 service requests are
those in which your network is minimally impaired or for which you require
product information.) After you describe your situation, the TAC Service
Request Tool provides recommended solutions. If your issue is not resolved
using the recommended resources, your service request is assigned to a
For S1 or S2 service requests or
if you do not have Internet access, contact the
To open a service request by telephone, use one of
the following numbers:
Asia-Pacific: +61 2 8446 7411
(Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447
For a complete list of
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in
a standard format,
Severity 1 (S1)—Your
network is “down,” or there is a critical impact to your business
operations. You and
Severity 2 (S2)—Operation of an existing network is
severely degraded, or significant aspects of your business operation are
negatively affected by inadequate performance of
Severity 3 (S3)—Operational performance of
your network is impaired, but most business operations remain functional.
You and
Severity 4 (S4)—You
require information or assistance with
Obtaining Additional Publications and Information
Information about
·
·
· Packet magazine is the
· iQ Magazine is the quarterly
publication from
· Internet Protocol
Journal is a quarterly journal published by
· World-class
networking training is available from
C
All other
trademarks mentioned in this document or Website are
the property of their respective owners. The use of the word partner does not
imply a partnership relationship between
Copyright
© 2010 Cisco Systems, Inc. All rights reserved.