Cisco Unified CallManager Device Package 6.1.2 (1131-1)
Release Notes
These Device Package release notes contain important
information about installation procedures and resolved caveats for Cisco
Unified CallManager Device Package release 6.1.2(1131-1).
1.
Note: Before you
install this
Determining
the Software Version
Compatibility
Matrix and Supported Upgrades
Important
Notes & Recommendations
Resolved
Caveats for Cisco Unified CallManager Device Package
This
Device Package includes the following resolved DDTS’s:
Locale
Installer for Cisco Unified CallManager
Cisco
Product Security Overview
Reporting
Security Problems in Cisco Products
Obtaining
Technical Assistance
Cisco
Technical Support Website
Definitions
of Service Request Severity
Obtaining
Additional Publications and Information
This document provides installation instructions
for this
2.
Note:
Failure to follow installation instructions as described may result in
inconsistent
Make sure that you install and configure this
release of
You can determine the version of
This
6.1(2) |
3.
Note: Review the Show/Software on the
4.
NOTE: Be aware that the release of
5. Endpoint firmware: http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser Endpoint documentation, including release notes: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/
File |
MD5 |
cmterm-devicepack6.1.2.xxxx-x.cop.sgn |
f7:8d:3b:6b:18:b6:b9:00:41:d6:cc:1a:ea:1d:8f:79 |
Cisco Unified CallManager Device Package 6.1.2(1131-1) includes the following firmware versions:
Device-type |
Load-name |
Version |
3911_3951-sip |
3911_3951-sip.8-1-2 |
8.1(2.0) |
6608 |
6608-4.0.0.32-mgcp |
D00404000032.bin/D0054322.bin |
6608cfb |
6608cfb-4.0.0.03-sccp |
C00104000003.bin/C002E031.bin |
6608mtp |
6608mtp-4.0.0.06-sccp |
M00104000006.bin/M002E031.bin |
6624 |
6624-4.0.0.13-mgcp |
A00204000013.bin/A0034322.bin |
7902 |
7902-8.0.2-sccp |
8.0(2.0) |
7905 |
7905-8.0.1.1-sip |
8.0(1.1) |
7905 |
7905-8.0.3-sccp |
8.0(3.0) |
7910 |
7910-5.0.7.0-sccp |
5.0(7.0) |
7911_7906-sccp |
7911_7906-sccp.8-4-2 |
8.4(2.0) |
7911_7906-sip |
7911_7906-sip.8-4-2 |
8.4(2.0) |
7912 |
7912-8.0.1.1-sip |
8.0(1.1) |
7912 |
7912-8.0.3-sccp |
8.0(3.0) |
7914-sccp |
7914-sccp.5-0-4 |
5.0(4.0) |
7915 |
7915.1-0-3 |
1.0(3.0) |
7916 |
7916.1-0-3 |
1.0(3.0) |
7920-sccp |
7920-sccp.3-0-2 |
3.0(2.0) |
7921-sccp |
7921-sccp.1-2-1 |
1.2(1.0) |
7925-sccp |
7925-sccp.1-3-1 |
1.3(1.0) |
7931-sccp |
7931-sccp.8-4-2 |
8.4(2.0) |
7935-sccp |
7935-sccp.3-2-19 |
3.2(19.0) |
7936-sccp |
7936-sccp.3-3-16 |
3.3(16.0) |
7937-sccp |
7937-sccp.1-3-2 |
1.3(2.0) |
7940-7960 |
7940-7960-8.8.00-sip |
8.8(0.0) |
7940-7960-sccp |
7940-7960-sccp.8-0-10 |
8.0(10.0) |
7941_7961-sccp |
7941_7961-sccp.8-4-2 |
8.4(2.0) |
7941_7961-sip |
7941_7961-sip.8-4-2 |
8.4(2.0) |
7942_7962-sccp |
7942_7962-sccp.8-4-2 |
8.4(2.0) |
7942_7962-sip |
7942_7962-sip.8-4-2 |
8.4(2.0) |
7945_7965-sccp |
7945_7965-sccp.8-4-2 |
8.4(2.0) |
7945_7965-sip |
7945_7965-sip.8-4-2 |
8.4(2.0) |
7970_7971-sccp |
7970_7971-sccp.8-4-2 |
8.4(2.0) |
7970_7971-sip |
7970_7971-sip.8-4-2 |
8.4(2.0) |
7975-sccp |
7975-sccp.8-4-2 |
8.4(2.0) |
7975-sip |
7975-sip.8-4-2 |
8.4(2.0) |
7985 |
7985-4-1-7-0-sccp |
4.1(7.0) |
ata |
ata-3.2.3-sccp |
3.2(3.0) |
·
To minimize call-processing interruptions during the
upgrade process, make sure that all servers are running the same version of
·
Make sure that the servers are online
before you begin this Device Package installation.
6.
Note:
Procedure
NOTE: Apply this patch to all of your
When applying this Device Package to enable new
device support, a cluster-wide reboot is required for those devices to register
successfully. A clusterwide reboot IS NOT
required when running to update existing firmware/support.
For
7.
Note: In order to change the loads manually, you do NOT need to reinstall
this Device Package. The new files will be present in the TFTP folder. Go to CCMAdmin->Device->Device Settings->Device Defaults
and manually change the name of the load file (for specific device(s)) to the
new load and click UPDATE.
Note: If
you are rebooting the cluster, the next step does not need to be done.
8.
The
The Device Package cannot be uninstalled. However, you can change
the device defaults for devices you wish to roll back. From the
Log
File Information
The system
creates log files which may be viewed via the following process:
· Using Cisco Unified CallManager
Serviceability Real-Time Monitoring Tool, select Trace & Log Central\Remote
Browse\Install and Upgrade Logs.
· Using Cisco Unified CallManager
Serviceability Real-Time Monitoring Tool, select Trace & Log Central\Collect
Files\Install and Upgrade Logs.
· Using Cisco Unified CallManager
Serviceability Real-Time Monitoring Tool, select Trace & Log Central\Query
Wizard\Install and Upgrade Logs.
· Using Cisco Unified CallManager
Serviceability Real-Time Monitoring Tool, select Trace & Log
Central\Schedule Collection\Install and Upgrade Logs.
Unified CM 6.1(2.1130.1) |
|
7985 --
Checkin new image 4.1.7 to CUCM branches |
|
Update
Cisco 7921 & 7925 support files for Release 1.3.2 |
Unified CM 6.1(2.1129.1) |
|
Adding
842 phone firmware |
Unified CM 6.1(2.1128.1) |
|
7937
1.3(2) CUCM vob check in defect |
|
Adding
842 QED features |
Unified CM 6.1(2.1127.1) |
|
Checking
in bkem79167915 103 firmware |
|
Add
remote hold icon to 7914 |
Unified CM 6.1(2.1124.1) |
|
Check-in
Cisco 7925 firmware version 1.3(1) to CUCM |
Unified CM 6.1(2.1123.1) |
|
Checkin
8010 firmware into CUCM vob |
Unified CM 6.1(2.1120.1) |
|
Update
7925 CSV & XML files for FCS |
|
Cisco
7975 phone template no longer compatible w other 8 button phone |
Unified CM 6.1(2.1117.1) |
|
7915
102 check in again |
|
Adding
Display Refresh Flicker Correction feature |
|
Adding
3rd Gen firmware 841SR1 to CUCM |
Unified CM
6.1(2.1115.1) |
|
Feature
Safe on Phone Button TemplatePhones does not work |
Unified CM 6.1(2.1113.2) |
|
Adding 841 to CUCM |
Unified CM 6.1(2.1112.1) |
|
Check-in |
|
Update 7921 support files for Release 1.2 |
Unified CM 6.1(2.1110.1) |
|
3.3(16) and 3.2(19) CCM vob
commit |
|
Checking in bkem7916 102SR1 firmware |
Unified CM 6.1(2.1108.1) |
|
7936 Restricted Access to the phones setting
menu QED Change |
Unified CM 6.1(2.1106.1) |
|
Checkin phone load 8.1(2) in CM Branches |
Unified CM 6.1(2.1104.1) |
|
Add 7925 support files ( |
Unified CM 6.1(2.1102.1) |
|
7985- incorrrect
load302.txt file in 4.1(6) cop |
Unified CM 6.1(2.1101.2) |
|
Checkin 7985 4.1(6) copfiles
to all relevant UCM branches |
|
Adding 8.3(5) phone firmware to CUCM |
|
|
|
For optimal performance, be sure
that you use the
Each release of
9.
Note:
When using locales,
You can access the most current
http://www.cisco.com/univercd/home/home.htm
You can access the
You can access international
http://www.cisco.com/public/countries_languages.shtml
For additional information about
To access the documentation suite for voice
products, navigate to the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/.
To access the latest software upgrades and related
documentation for
Registered
http://www.cisco.com/en/US/partner/ordering/
http://www.cisco.com/go/marketplace/
You can find instructions for ordering
documentation at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order
You can send comments about technical documentation
to bug-doc@cisco.com.
You can submit comments by using the response card
(if present) behind the front cover of your document or by writing to the
following address:
Attn: Customer Document Ordering
We appreciate your comments.
From this site, you can perform these tasks:
A current list of security advisories and notices
for
If you prefer to see advisories and notices as they
are updated in real time, you can access a Product Security Incident Response
Team Really Simple Syndication (PSIRT RSS) feed from this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
We
encourage you to use Pretty Good Privacy (PGP) or a compatible product to
encrypt any sensitive information that you send to
http://pgp.mit.edu:11371/pks/lookup?search=psirt%40cisco.com&op=index&exact=on
In an
emergency, you can also reach PSIRT by telephone:
Obtaining Technical Assistance
For all customers, partners, resellers, and
distributors who hold valid
The
http://www.cisco.com/techsupport
Access to all tools on the
10.
Note: Use the
Using the online TAC Service Request Tool is the
fastest way to open S3 and S4 service requests. (S3 and S4 service requests are
those in which your network is minimally impaired or for which you require
product information.) After you describe your situation, the TAC Service
Request Tool provides recommended solutions. If your issue is not resolved
using the recommended resources, your service request is assigned to a
For S1 or S2 service requests or if you do not have
Internet access, contact the
To open a service request by telephone, use one of
the following numbers:
Asia-Pacific: +61 2 8446 7411
(Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447
For a complete list of
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in
a standard format,
Severity 1 (S1)—Your network is
“down,” or there is a critical impact to your business
operations. You and
Severity 2 (S2)—Operation of an
existing network is severely degraded, or significant aspects
of your business operation are negatively affected by inadequate performance of
Severity 3 (S3)—Operational
performance of your network is impaired, but most business
operations remain functional. You and
Severity 4 (S4)—You require information or
assistance with
Obtaining Additional Publications and Information
Information about
·
·
· Packet magazine is the
· iQ Magazine is the quarterly
publication from
· Internet Protocol
Journal is a quarterly journal published by
· World-class
networking training is available from
C
All other
trademarks mentioned in this document or Website are the property of their
respective owners. The use of the word partner does not imply a partnership
relationship between
Copyright ©
2009 Cisco Systems, Inc. All rights reserved.