Problem Description
To upgrade to the unrestricted version of 7.1(5)
from 5.x/6.x/7.x, this patch must be applied prior to initiating the upgrade so
that unrestricted 7.1(5) is recognized as a valid upgrade.
Products Affected
The following UCM versions:
Cisco Unified Communications Manager - 5.1(3), 6.1(3), 6.1(4), 6.1(5), 7.0(2), 7.1(2), 7.1(3)
Who is Affected
***This patch ONLY needs to be
applied if the following conditions are met ***
1.) The current active version of the UCM matches one the following versions: 5.1(3), 6.1(3), 6.1(4), 6.1(5), 7.0(2), 7.1(2), 7.1(3)
AND
2.) The system is being upgraded to an unrestricted version of 7.1(5)
Installation Instructions
File Name: ciscocm.allow_upgrade_to_unrestricted.cop.sgn
MD5 Sum: 70:82:4d:18:89:28:6e:b9:65:48:99:6f:84:1b:db:cf
*** The patch installation should be done off hours during a
maintenance window because there is a slight risk that installation during
normal business hours could temporarily impact system performance ***
*** No reboot, restart of the system or restart of any
services is required after the patch has been installed. ***
Patch File Location
The patch file is located in the 7.1 Utilities area. Below are instructions for navigating to the
patch location.
Step 1 Go to http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml.
Step 2 From the Downloads window, click the
"+" next to IP Telephony
Step 3 From the options that display, click
the "+" next to Call Control
Step 4 From the options that display, click
the "+" next to Cisco Unified Communications Manager
(CallManager)
Step 5
From the options that display, click the "+" next to Cisco
Unified Communications Manager Version 7.1
Step 6
From the options that display, click Unified Communications
Manager/CallManager Utilities