The 9.1(1) firmware image within the installation program supports the Skinny Client Control Protocol (SCCP) for the following Cisco IP Phone models:
This firmware version is supported on Cisco Unified Communication Manager Release 7.1(3), 8.0(1), 8.5(1) and higher.
For a list of Resolved Problems and Known
Problems with this firmware version, you can obtain the Firmware Release Notes
in English by clicking the following URL:
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/6945/firmware/9_1_1/english/release/notes/6945_911.html
For all phone documentation, click the following
URL:
http://www.cisco.com/en/US/products/ps10326/tsd_products_support_series_home.html
Before using the 9.1(1) firmware for Cisco Unified IP Phone model
6945 with Cisco Unified Communication Manager Release
7.1.3, 8.0.1, 8.5.1 and higher,
you need install the Device Enabler on the Cisco Unified Communication Manager publisher in the cluster.
The 9.1(1) Device Enabler for the 6945 is listed
below.
Table 1: Cisco IP Phone Models 6945 Device
Enabler
Cisco IP Phone Model |
CallManager Version |
Executable on Software Page |
MD5 hash |
6945 |
7.1.3, 8.0.1, 8.5.1 and higher |
cmterm-6945-qed.9-1-1-0.cop.sgn |
5b40e4e97727888edd1e6e1dde480420 |
Before using the 9.1(1) firmware for Cisco Unified IP Phone models
6945 with Cisco Unified Communication Manager
Release 7.1.3, 8.0.1, 8.5.1 and higher,
you need install the latest firmware on all Cisco Unified Communication Manager
servers in the cluster.
The 9.1(1) firmware for the 6945 is listed
below.
Table 2: Cisco IP Phone Models 6945 Firmware
Load
Cisco IP Phone Model |
CallManager Version |
Supported Protocol |
Executable on Software Page |
MD5 hash |
6945 |
7.1.3, 8.0.1, 8.5.1 and higher |
SCCP |
cmterm-6945-sccp.9-1-1-0.cop.sgn |
0e4d5d20b57c45cb4a79d6f69347c1fe |
Perform the following procedure:
Step 1 Go to
the following URL: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240
Step 2 Log in
to the Download Software page.
Step 3 In the Make a selection to continue section, Choose
Products > Voice and Unified Communications > IP telephony.
Step 4 Choose
IP Phones > Cisco Unified IP Phones 6900
Series.
Step 5 Choose
your phone type.
Step 6 Choose
Skinny Client Control Protocol (SCCP) Software.
Step 7 Choose
9.1(1) under the Latest Releases
folder.
Step 8 Download the files listed in Table 1 and Table
2.
For Cisco Unified Communication Manager Release 7.1.3, 8.0.1, 8.5.1 and higher, you need do all software installations and upgrades by using the Software Upgrades menu options. The system can upload and process only software that Cisco Systems approved.
The Cisco IP Phone Model 6945 Firmware version 9.1(1) is also supplied in zip file, as an alternative in case a Cisco Unified Communication Manager is not available to run the executable installer program. The name of this file is: cmterm-6945-sccp.9-1-1-0.zip. Please refer to "downloading the Device Enabler and firmware load" for downloading the zip files.
After unzipping the firmware files, they should be manually copied to the appropriate directory on the TFTP server.
Copyright 2010
Cisco Systems, Inc. All Rights Reserved