The 9.2(1) SIP firmware image within the installation program supports the Session Intiation Protocol (SIP) for the following Cisco IP Phone models:
This firmware version is supported on Cisco Unified CallManager Release 7.1.5 and higher.
You need to install the phone firmware as listed below.
For a list of Resolved Problems and Known
Problems with this firmware version, you can obtain the Firmware Release Notes
in English by clicking the following URL:
http://www.cisco.com/en/US/docs/voice_ip_comm/cata/187/9_2_1/english/release/notes/atarn921.html
For all Phone firmware Release Notes, click the following
URL:
http://www.cisco.com/en/US/products/ps10326/tsd_products_support_series_home.html
For all phone documentation, click the following URL:
http://www.cisco.com/en/US/products/ps10326/tsd_products_support_series_home.html
Before using the 9.2(1) firmware for Cisco ATA 187 with Cisco Unified Communication Manager Release 7.1.5, 8.6 and higher, you must install the QED on the Cisco Unified Communication Manager publisher in the cluster.
The 9.2(1) QED for the ATA 187 are listed below.
Table 1: Cisco ATA 187 QED Loads
Cisco IP Phone Model |
CallManager Version |
Executable on Software Page |
MD5 hash |
ATA 187 |
7.1.5 and higher |
cmterm-ata187-qed.9-2-1-0.cop.sgn |
f6:6a:84:f7:6e:2c:c2:74:95:66:a7:19:00:c1:af:30 |
Before using the 9.2(1) firmware for ATA 187 with Cisco Unified Communication Manager Release 7.1.5, 8.6 and higher, you must install the latest firmware on all Cisco Unified Communication Manager servers in the cluster.
The 9.2(1) SIP installation programs for the ATA 187 are
listed below.
Table 2: Cisco ATA 187 Firmware Loads
Cisco IP Phone Model |
CallManager Version |
Executable on Software Page |
MD5 hash |
ATA 187 |
7.1.5 and higher |
cmterm-ata187.9-2-1-0.cop.sgn |
a1:d5:e5:65:4a:19:5d:e8:a8:68:f4:18:8f:be:0b:ef |
Perform the following procedure:
Step 1 Go to the following URL: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240
Step 2 Log in to the Download Software page.
Step 3 In the Make a
selection to continue section, Choose Products
> Voice and Unified Communications > IP telephony.
Step 4 Choose IP Phones > Cisco ATA 180 Series Analog Telephone Adaptors.
Step 5 Choose your phone type.
Step 6 Choose 9.2(1) under the Latest Releases folder.
Step 8 Download the files listed in Table 1 and Table 2.
For Cisco Unified CallManager 7.1.5 and higher, you must do all software installations and upgrades by using the Software Upgrades menu options. The system can upload and process only software that Cisco Systems approved.
After unzipping the firmware files, they should be manually copied to the appropriate directory on the TFTP server.
Copyright ©2011 Cisco Systems, Inc. All Rights Reserved