Cisco TelePresence Video Master Multinational Authorized Technology Provider Demonstration Equipment

Demonstration Requirement

The Cisco TelePresence Video Master Multinational Authorized Technology Provider (ATP) Program requires that demonstration equipment be used solely by authorized partners for TelePresence video products and solutions for:

  • Support
  • User training
  • Customer proof of concept
  • Demonstration purposes
  • Support of customer engagements

ATP partners must also be familiar with their local or remote Cisco TelePresence Video facilities and be able to demonstrate the ability to support a customer engagement when deploying Cisco TelePresence Video products and services.

ATP partners may purchase or lease this equipment direct from Cisco at the partner's discount set forth in the partner's direct or indirect Reseller Agreement with Cisco or at other pricing as may be offered by Cisco.

ATP partners may apply any equipment leased or purchased from TANDBERG as part of the enVision Partner Program agreement toward meeting the demonstration equipment requirements set forth in the Cisco TelePresence Video Master ATP Program Requirements document.

Cisco highly recommends a support contract to be maintained for all lab equipment providing partner level access (level 3) to Cisco.com, Cisco Technical Assistance Center (TAC), and other Cisco support resources. Cisco also highly recommends that partners consistently upgrade software to ensure that they can demonstrate the latest capabilities of the products and solutions.

TelePresence Video Master Multinational ATP demonstration equipment should not be used for resale or in customer production deployments.

ATP partners must be able to demonstrate endpoint and AV integration TelePresence Video solutions. After building out infrastructure capabilities in two Host ATP locations, additional ATP Host locations for the same partner may use the central infrastructure at the other two locations as long as they can demonstrate the features and functionalities of the products below. Cisco TelePresence Video Master Multinational Partners must have all local endpoint requirements for demonstration purposes.

ATP partners must be able to demonstrate endpoint and AV integration TelePresence Video Express solutions.

Option 1: Standalone Master demonstration requirements in all locations as defined in associated TelePresence Video Master ATP Host and Satellite authorized locations.

Americas, APJC and EMEAR - Master Multinational Standalone Demonstration Equipment

Partners must acquire the demonstration equipment listed in Table 1 as part of the Cisco TelePresence Video Master host requirement. Equipment must be in two locations, as indicated in the Cisco TelePresence Video Master Multinational Program Requirements Document (PRD).

ATP partners must acquire the demonstration equipment listed in Table 2 as part of the Cisco TelePresence Video Master satellite requirement. Equipment must be in two locations, as indicated in the Cisco TelePresence Video Master Multinational PRD.

Table 1 - Master Multinational Standalone - Cisco TelePresence Video Master Host Demonstration Equipment Requirements

Endpoints

personal system (choose one)

EX 60
EX 90

Choose one from either category
Multipurpose
Profile 42 with C40
Profile 52 C Series
Profile 55 C Series
Profile 65 C Series

Solutions
Integrator C40
Integrator C60
Integrator C90

Immersive (Choose One)

CTS 1300-XX
CTS 3XXX
TX9000
TX1310

Choose two from any category
Immersive
CTS 1300-XX
CTS 3XXX
TX9000
TX1310


Multipurpose
CTS 500-XX
CTS 1100
Profile 42 C with C40
Profile 52 C Series
Profile 55 C Series
Profile 65 C Series


Personal
EX60
EX60


Solution
Quick Set C20
SX20
MX200,MX300
Integrator C40
Integrator C60
Edge 75 or 95 MXP*

Infrastructure

Call Control2 (must have all products listed below)

VCS Control + FindMe
VCS Expressway

Multipoint (choose one)

Cisco TelePresence MCU 45XX* (45014 and above)
Cisco TelePresence MCU53XX
Cisco TelePresence MCU MSE 8000 Chassis + 8710 Blade(s)

TelePresence / interop multipoint (choose one)

Cisco TelePresence Server 7010
Cisco TelePresence MCU MSE 8000 Chassis + 8710 Blade(s)

Management (Choose one)

Cisco TelePresence Management Suite Appliance5
Cisco TelePresence Management Suite Application

1Fiscal Year 2013 will be last opportunity to use Edge;
2Call control-Virtual option available, with different SKUs;
3Minimum 8.6.2 version is required for this product;
4Fiscal Year 2014 will be last opportunity to use MCU 4501;
5Management Suite Appliance is End-Of-Sale. Will no longer be available to order.

  • Items above are both a part of the TV ATP partner requirements and the ATP Demo program, except items marked with an asterisk, which satisfy requirements but can only be purchased at standard discount
  • The CTS 1300 is for partners that have no current demonstration equipment in the CTS 1xxx series product line. If partners have already invested in a CTS 1xxx series product, the existing investment will be acknowledged for this requirement
  • For partners that have already invested in the legacy TANDBERG T1 that investment will be acknowledged as an equivalent to the Codec C90. In addition, the CTS 3000 / CTS T3 will be acknowledged as an equivalent to the Profile C-Series or CTS 1xxx Series solution

Cisco highly recommends that partners:

  • Include Cisco Essential Operate for TelePresence to help ensure support of their demonstration equipment
  • Consistently upgrade software to help ensure that they can demonstrate the latest capabilities of the products and solutions

Table 2 - Master Multinational Standalone - Cisco TelePresence Video Master Satellite Demonstration Equipment Requirements

End Points

Personal System (choose one)

EX60
EX90

Choose one from any category
Immersive
CTS 1300-XX
CTS 3XXX
TX9000
TX1310

Multipurpose
CTS 500-XX
CTS 1100
Profile 42 C with C40
Profile 52 C Series
Profile 55 C Series
Profile 65 C Series

Solution
Quick Set C20
SX20
MX200,MX300
Integrator C40
Integrator C60
Edge 75 or 95 MXP*1

1Fiscal Year 2013 will be last opportunity to use Edge

  • Items above are both a part of the TV ATP partner requirements and the ATP Demo program, except items marked with an asterisk, which satisfy requirements but can only be purchased at standard discount
  • The CTS 1300 is for partners that have no current demonstration equipment in the CTS 1xxx series product line. If partners have already invested in a CTS 1xxx series product, the existing investment will be acknowledged for this requirement
  • For partners that have already invested in the legacy TANDBERG T1 that investment will be acknowledged as an equivalent to the Codec C90. In addition, the CTS 3000 / CTS T3 will be acknowledged as an equivalent to the Profile C-Series or CTS 1xxx Series solution

Cisco highly recommends that partners:

  • Include Cisco Partner Essential Operate Service for TelePresence to help ensure support of their demonstration equipment
  • Consistently upgrade software to help ensure that they can demonstrate the latest capabilities of the products and solutions

The Cisco TelePresence Partner Portal has the most current version of the Cisco TelePresence Video Master Multinational ATP Demonstration Program and a detailed list of demonstration equipment.

Option 2: Center of Excellence (CoE) model demonstration requirements in all locations as defined in TelePresence Video Master ATP Host and Satellite authorized locations defined below. Partner is to create a central demonstration model, including a Master Host with a Center of Excellence (CoE) to showcase the Cisco TelePresence Video portfolio as outlined in the demonstration requirements. The CoE includes global infrastructure that enables the CoE to simultaneously support demonstrations around the globe. A partner needs to establish the network infrastructure to enable quality CoE-based demonstrations to the entire partner's other invested locations.

Americas, APJC and EMEAR Region CoE Demonstration Equipment Requirement

  • One (1) Master Host with CoE infrastructure location as shown in Table 3
  • One (1) Master Host infrastructure location as defined in associated TelePresence Video Master ATP Host program as shown in Table 4
  • Two(2) satellite location need to meet the demonstration requirement with the reduced investment as defined in the Satellite Demonstration infrastructure locations as shown in the Tables 5.

Table 3. Americas, EMEAR, and APJC Master Multinational COE- Demonstration Equipment - Master Host with Center of Excellence, One location

CoE Only

CoE Only(Must have all products listed below)
Immersive 3-Screen (CTS3XXX orCTS T3 or TX9000)
(3x) UC Video Devices (9971, CUPC, E20)
TelePresence CUCM
TelePresence Content Server
TMS Analystics and Report Module

Endpoints

Choose one from either category*
Multipurpose
Profile 42 C with C40
Profile 52 C Series
Profile 55 C Series
Profile 65 C Series

Solution
Integrator C40
Integrator C60
Integrator C90
Immersive (Choose one)
CTS 1300-XX
CTS 3XXX
TX9000
TX1310
Personal System (Choose one)
EX60
EX90
Choose two from any category*
Immersive
CTS 1300-XX
CTS 3XXX
TX9000
TX1310


Multipurpose
CTS 500-XX
CTS 1100
Profile 42 C with C40
Profile 52 C Series
Profile 55 C Series
Profile 65 C Series


Personal
EX60
EX90


Solution
Quick Set C20
SX20
MX200,MX300
Integrator C40
Integrator C60
Edge 75 or 95 MXP*1

Infrastructure

Call Control2 (must have all products listed below)

VCS Control + FindMe
VCS Expressway

Multipoint (choose one)

Cisco TelePresence MCU 45XX* (45014 and above)
Cisco TelePresence MCU53XX
Cisco TelePresence MCU MSE 8000 Chassis + 8710 Blade(s)

TelePresence / interop multipoint (choose one)

Cisco TelePresence Server 7010
Cisco TelePresence MCU MSE 8000 Chassis + 8710 Blade(s)

Management (Choose one)

Cisco TelePresence Management Suite Appliance5
Cisco TelePresence Management Suite Application

1Fiscal Year 2013 will be last opportunity to use Edge;
2Call control-Virtual option available, with different SKUs;
3Minimum 8.6.2 version is required for this product;
4Fiscal Year 2014 will be last opportunity to use MCU 4501;
5Management Suite Appliance is End-Of-Sale. Will no longer be available to order.

  • Items above are both a part of the TV ATP partner requirements and the ATP Demo program, except items marked with an asterisk, which satisfy requirements but can only be purchased at standard discount
  • The CTS 1300 is for partners that have no current demonstration equipment in the CTS 1xxx series product line. If partners have already invested in a CTS 1xxx series product, the existing investment will be acknowledged for this requirement
  • For partners that have already invested in the legacy TANDBERG T1 that investment will be acknowledged as an equivalent to the Codec C90. In addition, the CTS 3000 / CTS T3 will be acknowledged as an equivalent to the Profile C-Series or CTS 1xxx Series solution

Table 4. Americas, EMEAR, and APJC Master Multinational COE-Demonstration Equipment - Master Host, One location

Endpoints

Choose one from either category
Multipurpose
Profile 42 C with C40
Profile 52 C Series
Profile 55 C Series
Profile 65 C Series

Solution
Integrator C40
Integrator C60
Integrator C90
Immersive (Choose one)
CTS 1300-XX
CTS 3XXX
TX9000
TX1310
Personal System (Choose one)
EX60
EX90
Choose two from any category*
Immersive
CTS 1300-XX
CTS 3XXX
TX9000
TX1310


Multipurpose
CTS 500-XX
CTS 1100
Profile 42 C with C40
Profile 52 C Series
Profile 55 C Series
Profile 65 C Series


Personal
EX60
EX90


Solution
Quick Set C20
SX20
MX200,MX300
Integrator C40
Integrator C60
Edge 75 or 95 MXP*1

Infrastructure

Call Control2 (must have all products listed below)

VCS Control + FindMe
VCS Expressway

Multipoint (choose one)

Cisco TelePresence MCU 45XX* (45014 and above)
Cisco TelePresence MCU53XX
Cisco TelePresence MCU MSE 8000 Chassis + 8710 Blade(s)

TelePresence / interop multipoint (choose one)

Cisco TelePresence Server 7010
Cisco TelePresence MCU MSE 8000 Chassis + 8710 Blade(s)

Management (Choose one)

Cisco TelePresence Management Suite Appliance5
Cisco TelePresence Management Suite Application

1Fiscal Year 2013 will be last opportunity to use Edge;
2Call control-Virtual option available, with different SKUs;
3Minimum 8.6.2 version is required for this product;
4Fiscal Year 2014 will be last opportunity to use MCU 4501;
5Management Suite Appliance is End-Of-Sale. Will no longer be available to order.

  • Items above are both a part of the TV ATP partner requirements and the ATP Demo program, except items marked with an asterisk, which satisfy requirements but can only be purchased at standard discount
  • The CTS 1300 is for partners that have no current demonstration equipment in the CTS 1xxx series product line. If partners have already invested in a CTS 1xxx series product, the existing investment will be acknowledged for this requirement
  • For partners that have already invested in the legacy TANDBERG T1 that investment will be acknowledged as an equivalent to the Codec C90. In addition, the CTS 3000 / CTS T3 will be acknowledged as an equivalent to the Profile C-Series or CTS 1xxx Series solution

Table 5. Americas, EMEAR, and APJC Master Multinational COE - Demonstration Equipment - Master Satellite, Two locations

Endpoints

Personal System (Choose one)

EX 60
EX 90

Choose one from any category*
Immersive
CTS 1300-XX
CTS 3XXX
TX9000

Multipurpose
CTS 500-XX
CTS 1100
Profile 42 C with C40
Profile 52 C Series
Profile 55 C Series
Profile 65 C Series

Solution
Quick Set C20
SX20
MX200,MX300
Integrator C40
Integrator C60
Edge 75 or 95 MXP*1

1Fiscal Year 2013 will be last opportunity to use Edge

  • Items above are both a part of the TV ATP partner requirements and the ATP Demo program, except items marked with an asterisk, which satisfy requirements but can only be purchased at standard discount
  • The CTS 1300 is for partners that have no current demonstration equipment in the CTS 1xxx series product line. If partners have already invested in a CTS 1xxx series product, the existing investment will be acknowledged for this requirement
  • For partners that have already invested in the legacy TANDBERG T1 that investment will be acknowledged as an equivalent to the Codec C90. In addition, the CTS 3000 / CTS T3 will be acknowledged as an equivalent to the Profile C-Series or CTS 1xxx Series solution

Cisco requires a valid support contract must be maintained for all demonstration equipment providing partner-level access (level 3) to Cisco.com, Cisco Technical Assistance Center (TAC), and other Cisco support resources. Cisco highly recommends that partners consistently upgrade software to ensure that they are able to demonstrate the latest capabilities the products and solutions.

As the natural product life cycle, market consolidation, and emerging technologies result in products reaching the end of their life, Cisco reserves the right to announce products designated as reaching "end-of-life status". Demo products once they are at the end of sale order date of the "end-of-life" product milestone, are no longer eligible to count towards program requirements of newly submitted TelePresence Video ATP partner applications.

Refer to the TelePresence Partner Portal for the most current version of the Cisco TelePresence Video Master Global ATP Demonstration Program and for a detailed list of demonstration equipment.