IT Certification and Career Paths

642-902 ROUTE

Implementing Cisco IP Routing

Exam Number 642-902 ROUTE
Last day to test January 29, 2015
Associated Certifications CCDP
CCNP Routing and Switching
Duration 120 minutes (45 - 55 questions)
Available Languages English and Japanese
Register Pearson VUE
Exam Policies Read current policies and requirements
Exam Tutorial Review type of exam questions

The Implementing Cisco IP Routing (ROUTE 642-902) is a qualifying exam for the Cisco Certified Network Professional CCNP, Cisco Certified Internetwork Professional CCIP, and Cisco Certified Design Professional CCDP certifications. The exam will certify that the successful candidate has the knowledge and skills necessary to use advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs. The exam also covers configuration of secure routing solutions to support branch offices and mobile workers.

The exam is closed book and no outside reference materials are allowed. The following topics are general guidelines for the content that is likely to be included on the practical exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the following guidelines may change at any time without notice.

  • 25%     1.0   Implement an EIGRP Based Solution, given
                 a Network Design and a set of Requirements
     

      • 1.1   Determine network resources needed for implementing EIGRP
                in a network
         
      • 1.2   Create an EIGRP implementation plan
         
      • 1.3   Create an EIGRP verification plan
         
      • 1.4   Configure EIGRP routing
         
      • 1.5   Verify EIGRP solution was implemented properly using show
                and debug commands
         
      • 1.6   Document the results of EIGRP implementation and verification
         
  • 25%     2.0   Implement a Multi-Area OSPF Network, given
                 a Network Design and a set of Requirements
     

      • 2.1   Determine network resources needed for implementing OSPF
                on a network
         
      • 2.2   Create an OSPF implementation plan
         
      • 2.3   Create an OSPF verification plan
         
      • 2.4   Configure OSPF routing
         
      • 2.5   Verify OSPF solution was implemented properly using show
                and debug commands
         
      • 2.6   Document results of OSPF implementation and
                verification plan
         
  • 5%     3.0   Implement an eBGP Based Solution, given
              a Network Design and a set of Requirements
     

      • 3.1   Determine network resources needed for implementing eBGP
                on a network
         
      • 3.2   Create an eBGP implementation plan
         
      • 3.3   Create an eBGP verification plan
         
      • 3.4   Configure eBGP routing
         
      • 3.5   Verify eBGP solution was implemented properly using show
                and debug commands
         
      • 3.6   Document results of eBGP implementation and verification plan
         
  • 15%     4.0   Implement an IPv6 Based Solution, given
                a Network Design and a set of Requirements
     

      • 4.1   Determine network resources needed for implementing IPv6
                on a network
         
      • 4.2   Create an IPv6 implementation plan
         
      • 4.3   Create an IPv6 verification plan
         
      • 4.4   Configure IPv6 routing
         
      • 4.5   Configure IPv6 interoperation with IPv4
         
      • 4.6   Verify IPv6 solution was implemented properly using show
                and debug commands
         
      • 4.7   Document results of IPv6 implementation and verification plan
         
  • 15%     5.0   Implement an IPv4 or IPv6 Based
                Redistribution Solution, given a Network
                Design and a set of Requirements
     

      • 5.1   Create a redistribution implementation plan based upon the
                results from a redistribution analysis
         
      • 5.2   Create a redistribution verification plan
         
      • 5.3   Configure a redistribution solution
         
      • 5.4   Verify that a redistribution was implemented
         
      • 5.5   Document results of a redistribution implementation and
                verification plan
         
      • 5.6   Identify the differences between implementing an IPv4 and IPv6
                redistribution solution
         
  • 10%     6.0   Implement Layer 3 Path Control Solution
     

      • 6.1   Create a Layer 3 path control implementation plan based upon
                the results of the redistribution analysis
         
      • 6.2   Create a Layer 3 path control verification plan
         
      • 6.3   Configure Layer 3 path control
         
      • 6.4   Verify that a Layer 3 path control was implemented
         
      • 6.5   Document results of a Layer 3 path control implementation
                and verification plan
         
  • 5%     7.0   Implement Basic Teleworker and Branch
             Services
     

      • 7.1   Describe broadband technologies
         
      • 7.2   Configure basic broadband connections
         
      • 7.3   Describe basic VPN technologies
         
      • 7.4   Configure GRE
         
      • 7.5   Describe branch access technologies
         
  • The following course is the recommended training for this exam.

    • Implementing Cisco IP Routing (ROUTE)

    Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you

    A variety of Cisco Press titles may be available for this exam. These titles can be purchased through the Cisco Marketplace Bookstore, directly from Cisco Press.

          Register at Pearson VUE      

    Cisco Learning Network

    Get valuable IT training resources for all Cisco certifications. Access study tools, CCNA practice tests, IT salaries, and find IT jobs.

    Go Now

    Cisco Training Tools

    Use the following tools to assist in your certification journey.

    Cisco Learning Locator Self Assessment Tool Certification Tracking System Certifications & Communities Online Support

    Cisco Learning Labs

    Get hands-on routing / switching lab experience using Cisco IOS on UNIX.

    Learn More