IT Certification and Career Paths

200-101 ICND2

Interconnecting Cisco Networking Devices Part 2

Exam Number 200-101 ICND2
Associated Certifications CCNA Routing and Switching
Duration 75 Minutes (50-60 questions)
Available Languages English
Register Pearson VUE
Exam Policies Read current policies and requirements
Exam Tutorial Review type of exam questions

The 200-101 Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the CCNA Routing and Switching certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 2 (ICND2) version 2 course. The exam tests a candidate's knowledge and skills required to successfully install, operate, and troubleshoot a small to medium-size enterprise branch network. The exam includes topics on LAN switching technologies, IP routing technologies, IP services (FHRP, syslog, SNMP v2 and v3), troubleshooting, and WAN technologies.

The exam is closed book and no outside reference materials are allowed. The following topics are general guidelines for the content that is likely to be included on the practical exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the following guidelines may change at any time without notice.

  • 21%     1.0   LAN Switching Technologies

      • 1.1   Identify enhanced switching technologies
        • 1.1.a   RSTP
        • 1.1.b   PVSTP
        • 1.1.c   EtherChannels
           
      • 1.2   Configure and verify PVSTP operation
        • 1.2.a   Describe root bridge election
        • 1.2.b   Spanning tree mode
           
  • 26%     2.0   IP Routing Technologies

      • 2.1   Describe the boot process of Cisco IOS routers
         
      • 2.2   Configure and verify operation status of a serial interface
         
      • 2.3   Manage Cisco IOS files
        • 2.3.a   Boot preferences
        • 2.3.b   Cisco IOS image(s)
        • 2.3.c   Licensing
          • 2.3.c (i)   Show license
          • 2.3.c (ii)   Change license
             
      • 2.4   Differentiate methods of routing and routing protocols
        • 2.4.a   Administrative distance
        • 2.4.b   Split horizon
        • 2.4.c   Metric
        • 2.4.d   Next hop
           
      • 2.5   Configure and verify OSPF (multi-area)
        • 2.5.a   Neighbor adjacencies
        • 2.5.b   OSPF states
        • 2.5.c   Configure OSPF v2
        • 2.5.d   Configure OSPF v3
        • 2.5.e   Router ID
        • 2.5.f   Understand LSA types and purpose
           
      • 2.6   Configure and verify EIGRP (single AS)
        • 2.6.a   Feasible distance/feasible successors/administrative
                      distance
        • 2.6.b   Feasibility condition
        • 2.6.c   Metric composition
        • 2.6.d   Router ID
        • 2.6.e   Auto summary
        • 2.6.f   Path selection
        • 2.6.g   Load balancing
          • 2.6.g (i)   Equal
          • 2.6.g (ii)   Unequal
             
        • 2.6.h   Passive interface
           
  •   6%     3.0   IP Services

      • 3.1   Recognize high availability (FHRP)
        • 3.1.a   VRRP
        • 3.1.b   HSRP
        • 3.1.c   GLBP
           
      • 3.2   Configure and verify syslog
        • 3.2.a   Utilize syslog output
           
      • 3.3   Describe SNMP v2 & v3
         
  • 32%     4.0   Troubleshooting

      • 4.1   Identify and correct common network problems
         
      • 4.2   Utilize netflow data
         
      • 4.3   Troubleshoot and resolve spanning tree operation issues
        • 4.3.a   Verify root switch
        • 4.3.b   Verify priority
        • 4.3.c   Verify mode is correct
        • 4.3.d   Verify port states
           
      • 4.4   Troubleshoot and resolve routing issues
        • 4.4.a   Verify routing is enabled (SHIP protocols)
        • 4.4.b   Verify routing table is correct
        • 4.4.c   Verify correct path selection
           
      • 4.5   Troubleshoot and resolve OSPF problems
        • 4.5.a   Verify neighbor adjancies
        • 4.5.b   Verify hello and dead timers
        • 4.5.c   Verify OSPF area
        • 4.5.d   Verify interface MTU
        • 4.5.e   Verify network types
        • 4.5.f   Verify neighbor states
        • 4.5.g   Review OSPF topology table
           
        `
      • 4.6   Troubleshoot and resolve EIGRP problems
        • 4.6.a   Verify neighbor adjancies
        • 4.6.b   Verify AS number
        • 4.6.c   Verify load balancing
        • 4.6.d   Split horizon
           
      • 4.7   Troubleshoot and resolve inter VLAN routing problems
        • 4.7.a   Verify connectivity
        • 4.7.b   Verify encapsulation
        • 4.7.c   Verify subnet
        • 4.7.d   Verify native VLAN
        • 4.7.e   Port mode trunk status
           
      • 4.8   Troubleshoot and resolve WAN implementation issues
        • 4.8.a   Serial interfaces
        • 4.8.b   Frame relay
        • 4.8.c   PPP
           
      • 4.9   Monitor NetFlow statistics
         
      • 4.10   Troubleshoot EtherChannel problems
         
  • 15%     5.0   WAN technologies

      • 5.1   Identify different WAN Technologies
        • 5.1.a   Metro Ethernet
        • 5.1.b   VSAT
        • 5.1.c   Cellular 3G/4G
        • 5.1.d   MPLS
        • 5.1.e   T1/E1
        • 5.1.f   ISDN
        • 5.1.g   DSL
        • 5.1.h   Frame relay
        • 5.1.i   Cable
        • 5.1.j   VPN
           
      • 5.2   Configure and verify a basic WAN serial connection
         
      • 5.3   Configure and verify a PPP connection between Cisco routers
         
      • 5.4   Configure and verify Frame Relay on Cisco routers
         
      • 5.5   Implement and troubleshoot PPPoE
         
  • The following course is the recommended training for this exam.

    • Interconnecting Cisco Networking Devices Part 2 (ICND2)

    Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you.

    A variety of Cisco Press titles may be available for this exam. These titles can be purchased through the Cisco Marketplace Bookstore, directly from Cisco Press.

          Register at Pearson VUE      

    Cisco Learning Network

    Get valuable IT training resources for all Cisco certifications. Access study tools, CCNA practice tests, IT salaries, and find IT jobs.

    Go Now

    Cisco Training Tools

    Use the following tools to assist in your certification journey.

    Cisco Learning Locator Self Assessment Tool Certification Tracking System Certifications & Communities Online Support

    Cisco Learning Labs

    Get hands-on routing / switching lab experience using Cisco IOS on UNIX.

    Learn More