CISCO 1800 Series Router Hardware View
Table of Contents

Cisco 1800 Series integrated services routers are the next evolution of the award-winning Cisco 1700 Series modular access routers. Cisco 1800 Series integrated services routers are the next evolution of the award-winning Cisco 1700 Series routers. The Cisco 1801, 1802, 1803, 1811, and 1812 routers are fixed configuration, while the Cisco 1841 is modular. Powered by Cisco IOS software , the Cisco 1800 Series router supports the Cisco Self-Defending Network with advanced security services and management capabilities such as hardware encryption acceleration, IPSec VPN (AES, 3DES, DES), firewall protection, inline intrusion prevention (IPS), Network Admission Control (NAC), and URL filtering support. For ease of management and configuration, the Cisco 1800 Series ship with the intuitive, web-based Cisco Router and Security Device Manager (SDM) pre-installed.

Base Models WIC-1ADSL-DG HWIC-ADSLI-B-S/T
CISCO1801 WIC-1ADSL-I-DG USB
CISCO1802 WIC-1SHDSL - EoS Aladdin eToken
CISCO1803 WIC-1SHDSL-V2 - EoS USB Flash
CISCO1811 WIC-1SHDSL-V3 Voice Interface Cards (Data Only)
CISCO1812 WIC-1AM VWIC-1MFT-E1
CISCO1841 WIC-2AM VWIC-2MFT-E1
- HWIC VWIC-1MFT-G703
WAN Interface Cards HWIC-4ESW VWIC-2MFT-G703
WIC-1T HWIC-4A/S VWIC-2MFT-E1-DI
WIC-2T HWIC-8A/S-RS232 2nd Generation VWIC
WIC-2A/S HWIC-8A -
WIC-1B-S/T-V3 HWIC-AP-G-X -
WIC-1B-U-V2 HWIC-AP-AG-X -
WIC-1DSU-56K4 HWIC-1ADSL -
WIC-1ADSL HWIC-ADSL-B-S/T AIM's
- HWIC-1ADSLI AIM-VPN/BPII-PLUS

CISCO1801 / CISCO1801W-AG-E/K9


  1. Compact Flash Slot

  1. ADSL over POTS WAN port
  2. ISDN BRI S/T port
  3. Managed 8-port FE switch
  4. FE WAN port*
  5. Console and AUX ports
  6. POE connector**
  7. Power switch
  8. Power connector
  9. RP-TNC antenna connectors (wireless models only)***

Notes:

*The Cisco 1801 only has one FE WAN port, which is the lower of the two ports shown. The upper port is disabled, and reserved for a future purpose.

** Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-180X= .

*** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

ADSL2/2+ support from IOS release 12.4(4)T and onwards

Return to Top

CISCO1802/K9 / CISCO1802W-AG-E/K9


  1. Compact Flash Slot
  1. ADSL over ISDN WAN port
  2. ISDN BRI S/T port
  3. Managed 8-port FE switch
  4. FE WAN port*
  5. Console and AUX ports
  6. POE connector**
  7. Power switch
  8. Power connector
  9. RP-TNC antenna connectors (wireless models only)***

Notes:

* The Cisco 1802 only has one FE WAN port, which is the lower of the two ports shown. The upper port is disabled, and reserved for a future purpose.

** Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-180X=.

*** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

Return to Top

CISCO1803/K9 / CISCO1803W-AG-A/K9


  1. Compact Flash Slot
  1. G.SHDSL WAN port
  2. ISDN BRI S/T port
  3. Managed 8-port FE switch
  4. FE WAN port*
  5. Console and AUX ports
  6. POE connector**
  7. Power switch
  8. Power connector
  9. RP-TNC antenna connectors (wireless models only)***

Notes:

* The Cisco 1803 only has one FE WAN port, which is the lower of the two ports shown. The upper port is disabled, and reserved for a future purpose.

** Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-180X= .

*** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

Return to Top

CISCO1811/K9 / CISCO1811W-AG-A/K9


  1. Compact Flash Slot
  1. V.92 Modem port
  2. USB 2.0 ports
  3. Managed 8-port FE switch
  4. FE WAN port
  5. Console and AUX ports
  6. POE connector*
  7. Power switch
  8. Power connector
  9. RP-TNC antenna connectors (wireless models only)**

Notes:

* Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-181X= .

** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

Return to Top

CISCO1812/K9 / CISCO1812W-AG-E/K9


  1. Compact Flash Slot
  1. ISDN BRI S/T port
  2. USB 2.0 ports
  3. Managed 8-port FE switch
  4. FE WAN port
  5. Console and AUX ports
  6. POE connector*
  7. Power switch
  8. Power connector
  9. RP-TNC antenna connectors (wireless models only)**

Notes:

* Inline power is a field-upgradable option only. It is not installed by default. An PoE power supply and cable can be ordered. The product code is: POE-181X=.

** Dipole swivel antennas are shipped with the router to connect to the RP-TNC connectors to operate the 802.11a/b/g radio module. The antenna included is: AIR-ANTM2050D-R

Return to Top

CISCO1841




  1. System Power (SYS PWR) LED
  2. System Activity (SYS ACT) LED
  1. Input power connection
  2. On/Off switch
  3. Slot 0 (WIC, VWIC—data only, or HWIC)
  4. Console port
  5. Fast Ethernet ports and LEDs
  6. Kensington TM security slot
  7. Slot 1 (WIC, VWIC—data only, or HWIC)
  8. CompactFlash memory card slot
  9. CompactFlash (CF) LED
  10. AIM LED
  11. USB port
  12. Aux port
  13. Chassis ground connection

Notes:

The Cisco 1841 is a Integrated services router with 2 WIC/HWIC Slots, 2 integrated 10/100Base-T ethernet ports, and 1 AIM slot.

Note: The WIC/HWIC/VWIC (in data mode only) slots on the Cisco 1841 router do not support Cisco product-based inline power, or Power-over-Ethernet (POE). More information.

Return to Top

WIC-1T



One port serial (DB60, Cisco 60-pin "5-in-1" connector ). Supports Max sync speed 2 Mbps. Does not support hot swap.

Platform Support
Feature Carrier Module Cisco IOS software
support		 Sync Max
Speed		 Async Max Speed Bisync & Half Duplex
1600 On-Board All Cisco IOS versions 2.048
Mbps		 115.2 Kbps Cisco IOS Versions
11.2(8)P
and later
1700 On-Board All Cisco IOS versions 2.048
Mbps		 115.2 Kbps All Cisco IOS versions
1800 On-Board 12.3(8)T4 2.048
Mbps		 - -
2600 On-Board, NM-2W All Cisco IOS versions 2.048
Mbps		 Not supported All Cisco IOS versions
2800 On-Board 12.3(8)T4 2.048
Mbps		 - -
3600 NM-1E2W,
NM-1E1R2W,
NM-2E2W,
NM-1FE2W,
NM-1FE1R2W,
NM-2FE2W,
NM-2W		 All Cisco IOS versions 2.048
Mbps		 Not supported Cisco IOS Versions
11.2(4)XA,
11.3,
11.3T,
and all 12.x
3631 On-Board Cisco IOS versions
12.2(13)T,
12.3(1),
12.3(2)T
and higher		 2.048
Mbps		 Not supported Cisco IOS versions
12.2(13)T,
12.3(1),
12.3(2)T
and higher
2691, 3725, 3745 On-Board,
NM-1FE2W,
NM-1FE1R2W,
NM-2FE2W,
NM-2W		 12.2(13)T,
12.2(11)YT,
12.3(1),
12.3(2)T
and higher		 2.048
Mbps		 Not supported Cisco IOS versions
12.2(13)T,
12.2(11)YT,
12.3(1),
12.3(2)T
and higher
3800 On-Board,
NM-2W,
NM-1FE1R2W,
NM-1FE2W,
NM-2FE2W,
NM-1FE2W-V2,
NM-2FE2W-V2 		12.3(11)T 2.048
Mbps		 - -

Return to Top

WIC-2T




Provides two serial ports using the "smart serial" connector.

  • Asynchronous support with a maximum speed (per port) of 115.2 Kbps, minimum 600 bps. If you need to run at speeds lower than 600 bps, use the AUX port instead.
  • Synchronous support with a maximum speed of 2.048 Mbps per port.
    • Supports one port at 8 Mbps when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.
    • Supports two ports at 4 Mbps each when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.
    • Supports 8 Mbps on all ports simultaneously on 2691, 3725, and 3745. No restrictions. Maximum six ports at 8 Mbps each.
Platform Support
Feature 1600 1700 1800 2600 2600XM 2800 3620, 3640, 3660 3631 2691, 3725, 3745 3800
Carrier Module Not Required On-Board On-Board On-Board NM-2W On-Board NM-2W On-Board NM-1E2W, NM-1E1R2W, and NM-2E2W NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W On-Board On-Board, NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W On-Board NM-1FE2W, NM-1FE2W-V2, NM-2FE2W,
NM-2FE2W-V2, NM-1FE1R2W, NM-2W
Cisco IOS software support Not supported All Cisco IOS versions 12.3(8)T4 All Cisco IOS versions 12.0(7)XK, 12.1(1)T, 12.2, 12.2T All Cisco IOS versions 12.2(8)T1 12.3(8)T4 Not supported 12.0(7)XK, 12.1(1)T, 12.2, 12.2T All Cisco IOS versions All Cisco IOS versions 12.3(11)T 12.3(11)T

The Cisco 1600 Series is not capable of supporting the WIC-2T due to lack of Serial Communications Controllers.

The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules do not have enough performance power to support the WIC-2T due to hardware limitations.

Return to Top

WIC-2A/S




The WIC-2A/S provides two serial ports using the Smart Serial connector. The only difference between the WIC-2A/S and the WIC-2T is the maximum supported sync speed.

  • Aysnchronous support with a maximum speed of 115.2 Kbps, and a minimum of 600 bps. If you need to run at speeds lower than 600 bps, use the AUX port instead.
  • Synchronous support with a maximum speed of 128 Kbps.

Platform Support
Feature 1600 1700 1800 2600 2600XM 2800 3620, 3640, 3660 3631 2691, 3725, 3745 3800
Carrier Module Not Required On-Board On-Board On-Board NM-2W On-Board NM-2W On-Board NM-1E2W, NM-1E1R2W, and NM-2E2W NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W On-Board On-Board, NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W On-Board NM-1FE2W, NM-1FE2W-V2, NM-2FE2W,
NM-2FE2W-V2, NM-1FE1R2W, NM-2W
Cisco IOS software support Not supported All Cisco IOS versions 12.3(8)T4 All Cisco IOS versions Cisco IOS versions 12.0(7)XK, 12.1(1)T, 12.2, 12.2T All Cisco IOS versions Cisco IOS versions 12.2(8)T1 12.3(8)T4 Not supported Cisco IOS versions 12.0(7)XK, 12.1(1)T, 12.2, 12.2T All Cisco IOS versions All Cisco IOS versions 12.3(11)T 12.3(11)T

The Cisco 1600 series is not capable of supporting the WIC-2A/S due to the lack of Serial Communications Controllers.

The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules do not have enough performance power to support the WIC-2A/S due to hardware limitations.

Return to Top

WIC-1B-S/T - End of Sale ,WIC-1B-S/T-V2, WIC-1B-S/T-V3




One ISDN BRI port (S/T interface, requires external NT-1, RJ-45 connector). Does not support hot swap.


Platform Support
Platform Cisco 1601(R), 1602 (R), and 1605-R Cisco 1603, 1603-R, 1604, and 1604-R Cisco 1720, 1721, 1751, 1760 Cisco 1750 Cisco 1800 Cisco 2600 and 2600XM Cisco 2800 Cisco 3620 and 3640, 3640A Cisco 3631 Cisco 3660 Cisco 2691, 3725, and 3745 Cisco 3800
Carrier Module On-Board On-Board On-Board On-Board On-Board On-Board NM-2W On-Board On-Board NM-2W On-Board NM-1E2W, NM-1E1R2W, and NM-2E2W NM-1FE2W, NM-1FE1R2W, and NM-2FE2W, NM-2W On-Board NM-1FE2W, NM-1FE1R2W, NM-2FE2W, and NM-2W Onboard, NM-1FE2W, NM-1FE2W-V2, NM-2FE2W,
NM-2FE2W-V2, NM-1FE1R2W, NM-2W

WIC-1B-S/T All Cisco IOS versions Not supported All Cisco IOS versions All Cisco IOS versions Not supported All Cisco IOS versions Not supported Cisco IOS versions 11.2(4)XA, 11.2(5)P, 11.3, 11.3T, all 12.x All Cisco IOS versions All Cisco IOS versions All Cisco IOS versions Not supported
WIC-1B-S/T-V2 Not supported Not supported First supported in 12.0(25), 12.1(19), 12.2(16), and 12.3(1) Not supported - First supported in 12.0(25), 12.1(19), 12.2(16), and 12.3(1) - First supported in 12.0(25), 12.1(19), 12.2(16), and 12.3(1) First supported 12.3(1) First supported in 12.0(25), 12.1(19), 12.2(16), and 12.3(1) First supported in 12.3(1) -
WIC-1B-S/T-V3 Not supported Not supported 12.3(10) Not supported 12.3(8)T4 12.3(10) 12.3(8)T Not Supported
Not Supported
12.3(10) 12.3(10) 12.3(11)T

Return to Top

WIC-1B-U-V2




1-port ISDN with NT-1 WIC. Provides a single ISDN BRI connection via an RJ-45 connector.


Platform Support
Platform Cisco 1700 Cisco 1800 Cisco 2600, 2600XM Cisco 2800 Cisco 3600 Cisco 2691, 3725, and 3745 Cisco 3800
WIC-1B-U-V2 12.1(18), 12.2(13), 12.2(13)T1 12.3(8)T4 12.0(23), 12.1(15), 12.2(10), 12.1(11)T 12.3(8)T 12.0(23), 12.1(15), 12.2(10), 12.1(11)T 12.2(13)T 12.3(11)T

Return to Top

WIC-1DSU-56K4




1-port 4-wire 56/64Kbps DSU/CSU WIC. Provides a single serial connection at speeds up to 64 Kbps.


Platform Support
Platform Cisco 1721 Cisco 1751 Cisco 1760 Cisco 1800 Cisco 2600 Cisco 2600XM Cisco 2800 Cisco 3620, 3640 Cisco 3660 Cisco 2691, 3725, and 3745 Cisco 3800
WIC-1DSU-56K4 12.2(8)T 12.2(4)T 12.2(11)T 12.3(8)T 11.3(2)XA, 12.1(3)T 12.1(14), 12.2(2), 12.2(8)T1 12.3(8)T4 11.2(4)XA 12.0(5)T 12.2(8)T 12.3(11)T

Return to Top

WIC-1ADSL



One RJ-11 ADSL interface. Supports ADSL over POTS with Annex A ITU 992.1 (G.dmt). Supports up to 23 virtual circuits per WIC. Dying gasp is not supported on WIC-1ADSL, For Dying gasp support please refer to WIC-1ADSL-DG.


Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1800 Cisco 2600 Cisco 2600XM Cisco 2800 Cisco 3600 Cisco 3631 Cisco 2691, 3725, and 3745 3800
Carrier Module On-Board On-Board On-Board On-Board, NM-2W On-Board, NM-2W On-Board NM-1E1R2W, NM-1E2W, NM-2E2W NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W On-Board On-Board NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W On-Board NM-1FE2W, NM-1FE2W-V2, NM-2FE2W,
NM-2FE2W-V2, NM-1FE1R2W, NM-2W
WIC-1ADSL Not Supported 12.1(3)XJ, 12.1(3)XP, 12.1(3)XT1, 12.1(5)YB, 12.2(2)T 12.3(8)T4 12.1(5)YB, 12.2(4)T 12.2(8)T1 12.3(8)T4 Not Supported 12.1(5)YB, 12.2(4)T Not Supported All Cisco IOS versions All Cisco IOS versions 12.3(11)T 12.3(11)T

Requires an "ADSL" feature set for CISCO 1700 series. Requires a "Plus" feature set for CISCO 2600 / 2600XM / 3600 / 3700 series.

Return to Top

WIC-1ADSL-DG




One RJ-11 ADSL interface. Supports ADSL over POTS with Annex A ITU 992.1 (G.dmt). Supports up to 23 virtual circuits per WIC. Dying Gasp Support.


Platform Support
Platform Cisco 1721, 1751, 1760 Cisco 1800 Cisco 2600XM Cisco 2800 Cisco 2691, 3725, and 3745 3800
Carrier Module On-Board On-Board On-Board, NM-2W On-Board On-Board NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W On-Board NM-1FE2W, NM-1FE2W-V2, NM-2FE2W,
NM-2FE2W-V2, NM-1FE1R2W, NM-2W
WIC-1ADSL 12.3(4)T 12.3(8)T4 12.3(4)XD 12.3(8)T4 12.3(4)XD 12.3(4)XD NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W 12.3(11)T

Requires an "ADSL" feature set for CISCO 1700 series. Requires a "Plus" feature set for CISCO 2600 / 2600XM / 3600 / 3700 series.
The term dying gasp refers to power status as defined in ITU-T standard G.991.2, section 7.1.2.5.3.

Return to Top

WIC-1ADSL-I-DG




Provides a single ADSL over ISDN connection, with Dying Gasp support, at uplink speeds up to 1 Mbps and downlink speeds up to 8 Mbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.


Platform Support
Platform Cisco 1721, 1751, 1760 Cisco 1841 Cisco 2610XM-51XM Cisco 2691 Cisco 2800 3725, 3745 3800
WIC-1ADSL-I-DG 12.3(4)T 12.3(8)T4 12.3(4)XD 12.3(4)XD 12.3(8)T4 12.3(4)XD 12.3(11)T

Requires an "ADSL" feature set for CISCO 1700 series. Requires a "Plus" feature set for CISCO 2600 / 2600XM / 3600 / 3700 series.
The term dying gasp refers to power status as defined in ITU-T standard G.991.2, section 7.1.2.5.3.


Return to Top


WIC-1SHDSL End Of Sale




One RJ-11 G.SHDSL interface. Symmetrical WAN speeds (up to 2.3 Mbps) over a single copper pair. Supports up to 23 virtual circuits per WIC.


Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1800 Cisco 2600 Cisco 2600XM Cisco 2800 Cisco 3600 Cisco 3631 Cisco 2691, 3725, and 3745 Cisco 3800
WIC-1SHDSL Not Supported 12.2(13)T 12.3(8)T4 12.2(4)XL, 12.3(1) 12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T 12.3(8)T4 12.2(8)T 12.3(2)T 12.2(13)T, 12.2(11)YT, 12.3(1), 12.3(2)T 12.3(11)T

Requires 1700, 1800, 2600, 2800, 3700, 3800 Chassis WIC Slot, or NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W WIC slots. Not supported in NM-1E1R2W, NM-1E2W, or NM-2E2W.

Requires an "ADSL" feature set for CISCO 1700 series. Requires a "Plus" feature set for CISCO 2600 / 2600XM / 3600 / 3700 series.

Return to Top


WIC-1SHDSL-V2 End Of Sale




One RJ-11 G.SHDSL interface. Symmetrical WAN speeds up to 2.3Mbps over a single copper pair and up to 4.6Mbps over two copper pairs. Supports up to 23 virtual circuits per WIC.


Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1800 Cisco 2691 2610-2651XM Cisco 2800 3725, 3745 3800
WIC-1SHDSL-V2 Not Supported 12.3(8)T 12.3(8)T4 12.3(4)XD 12.3(4)XD 12.3(8)T4 12.3(4)XD 12.3(11)T

Requires 1700, 1800,2600, 2800, 3800 Chassis WIC Slot, or NM-1FE2W-V2, NM-2FE2W-V2, and NM-FE1R2W-V2.

Return to Top

WIC-1SHDSL-V3




One RJ-11 G.SHDSL interface. Symmetrical WAN speeds up to 2.3Mbps over a single copper pair and up to 4.6Mbps over two copper pairs. Supports up to 23 virtual circuits per WIC.


Platform Support
Platform Cisco 1600 1721,1751,1760 1841 Cisco 2691 2610-2651XM 2811-2851 3725, 3745 2825,3845
WIC-1SHDSL-V3 Not Supported

IP/ADSL IP Base and up

IP Base and up IP Base and up IP Base and up IP Base and up IP Base and up IP Base and up

* Minimum IOS release 12.4(2)XA and Mimimum IOS T train support 12.4(3rd)T or 12.4(6)T

**Difference between V2 and V3 - Conexant Firmware Version as of 8/20/2005, A29733 (based on 2.3.1)for V2, 3.0.1 for V3

***Requires 1700, 1800,2600, 2800, 3800 Chassis WIC Slot, or NM-1FE2W-V2, NM-2FE2W-V2, and NM-1FE1R2W-V2.

Return to Top

Analogue Modem WICs

WIC-1AM


WIC-2AM



WIC-1AM and WIC-2AM provide V.90 analog modem interfaces for low density applications (router management, dial backup and access). WIC-1AM includes jack for handset sharing access to PSTN line.


Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1800 Cisco 2600 Cisco 2600XM Cisco 2800 Cisco 3600 Cisco 3631 Cisco 2691, 3725, and 3745 Cisco 3800
WIC-1AM Not Supported

12.2(4)YB

12.3(8)T4 12.2(2)XB, 12.2(8)T 12.2(8)T1 12.3(8)T4 12.2(2)XB, 12.2(8)T All Cisco IOS versions All Cisco IOS versions 12.3(11)T
WIC-2AM Not Supported

12.2(4)YB

12.3(8)T4 12.2(2)XB, 12.2(8)T 12.2(8)T1 12.3(8)T4 12.2(2)XB, 12.2(8)T All Cisco IOS versions All Cisco IOS versions 12.3(11)T

V.92 is not currently supported.

Return to Top

Analogue Modem WICs

WIC-1AM


WIC-2AM



WIC-1AM and WIC-2AM provide V.90 analog modem interfaces for low density applications (router management, dial backup and access). WIC-1AM includes jack for handset sharing access to PSTN line.


Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1800 Cisco 2600 Cisco 2600XM Cisco 2800 Cisco 3600 Cisco 3631 Cisco 2691, 3725, and 3745 Cisco 3800
WIC-1AM Not Supported 12.2(4)YB 12.3(8)T4 12.2(2)XB, 12.2(8)T 12.2(8)T1 12.3(8)T4 12.2(2)XB, 12.2(8)T All Cisco IOS versions All Cisco IOS versions 12.3(11)T
WIC-2AM Not Supported 12.2(4)YB 12.3(8)T4 12.2(2)XB, 12.2(8)T 12.2(8)T1 12.3(8)T4 12.2(2)XB, 12.2(8)T All Cisco IOS versions All Cisco IOS versions 12.3(11)T

Return to Top

1 and 2 Port E1 Multi-Flex Trunk VWIC




Product Description
VWIC-1MFT-E1 1-Port RJ-48 Multiflex Trunk - E1
VWIC-2MFT-E1 2-Port RJ-48 Multiflex Trunk - E1
VWIC-2MFT-E1-DI 2-Port RJ-48 Multiflex Trunk - E1 With Drop and Insert
VWIC-1MFT-G703 1-Port RJ-48 Multiflex Trunk - E1 for unstructured G.703
VWIC-2MFT-G703 2-Port RJ-48 Multiflex Trunk - E1 for unstructured G.703

This Multi-Flex Trunk may be used as a Voice Interface Card or as a WAN Interface Card (in a WIC slot in the 2600 or 3600). Thus it is a Voice WAN Interface Card (VWIC).



Platform Support
Feature
1600
1700
 1800
2600
2600XM
 2800
3600
3631
2691, 3725, 3745
 3800
Carrier Module On-Board On-Board On-Board On-Board NM-2W High Density Voice NM On-Board NM-2W High Density Voice NM On-Board NM-1E2W, NM-1E1R2W, NM-2E2W NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W High Density Voice NM On-Board On-Board NM-1FE2W, NM-1FE2W-V2, NM-2FE2W,
NM-2FE2W-V2, NM-1FE1R2W, NM-2W		 High Density Voice NM On-Board NM-1FE2W, NM-1FE2W-V2, NM-2FE2W,
NM-2FE2W-V2, NM-1FE1R2W, NM-2W
VWIC-1MFT-E1 Not supported 12.2(4)YB, 12.2(8)YJ 12.3(8)T4 12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T 12.0(7)XK, 12.1(1)T, 12.2, 12.2T 12.0(7)XK, 12.1(2)T, 12.2, 12.2T All Cisco IOS versions 12.2(8)T1 12.2(8)T1 12.3(8)T4 12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T 12.0(7)XK, 12.1(1)T, 12.2, 12.2T 12.0(7)XK, 12.1(2)T, 12.2, 12.2T All Cisco IOS versions

12.2(8)T
12.2(13)T3 for V2 NMs

 12.3(4)T 12.3(11)T
VWIC-2MFT-E1 Not supported 12.2(4)YB, 12.2(8)YJ 12.3(8)T4 12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T 12.0(7)XK, 12.1(1)T, 12.2, 12.2T 12.0(7)XK, 12.1(2)T, 12.2, 12.2T All Cisco IOS versions 12.2(8)T1 12.2(8)T1 12.3(8)T4 Not supported 12.0(7)XK, 12.1(1)T, 12.2, 12.2T 12.0(7)XK, 12.1(2)T, 12.2, 12.2T All Cisco IOS versions 12.2(8)T
12.2(13)T3 for V2 NMs		 12.3(4)T 12.3(11)T
VWIC-2MFT-E1-DI Not supported 12.2(4)YB, 12.2(8)YJ 12.3(8)T4 12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T 12.0(7)XK, 12.1(1)T, 12.2, 12.2T 12.0(7)XK, 12.1(2)T, 12.2, 12.2T All Cisco IOS versions 12.2(8)T1 12.2(8)T1 12.3(8)T4 12.0(5)XK, 12.0(7)T, 12.1, 12.1T, 12.2, 12.2T 12.0(7)XK, 12.1(1)T, 12.2, 12.2T 12.0(7)XK, 12.1(2)T, 12.2, 12.2T All Cisco IOS versions 12.2(8)T
12.2(13)T3 for V2 NMs		 12.3(4)T 12.3(11)T
VWIC-1MFT-G703 Not supported 12.2(8)YJ 12.3(8)T4 12.1(1)T, 12.2, 12.2T 12.1(1)T, 12.2, 12.2T Not supported 12.2(8)T1 12.2(8)T1 Not supported 12.3(8)T4 12.1(1)T, 12.2, 12.2T 12.1(1)T, 12.2, 12.2T Not supported All Cisco IOS versions 12.2(8)T
12.2(13)T3 for V2 NMs		 12.3(4)T 12.3(11)T
VWIC-2MFT-G703 Not supported 12.2(8)YJ 12.3(8)T4 12.1(1)T, 12.2, 12.2T 12.1(1)T, 12.2, 12.2T Not supported 12.2(8)T1 12.2(8)T1 Not supported 12.3(8)T4 Not supported 12.1(1)T, 12.2, 12.2T Not supported All Cisco IOS versions 12.2(8)T
12.2(13)T3 for V2 NMs		 12.3(4)T 12.3(11)T

For futher reference please refer to http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml

Return to Top

2nd Generation 1 and 2 Port T1E1 Multiflex Trunk Voice WAN Interface Cards




Product Description
VWIC2-1MFT-T1/E1 1-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card
VWIC2-2MFT-T1/E1 2-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card
VWIC2-1MFT-G703 1-Port G.703 Multiflex Trunk Voice/WAN Interface Card
VWIC2-2MFT-G703 2-Port G.703 Multiflex Trunk Voice/WAN Interface Card

* Have an onboard slot for a Cisco MFT Dedicated Echo Cancellation (ECAN) Module (part number EC-MFT-32 or EC-MFT-64),

* Support both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC2s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications.

*Include the drop-and-insert multiplexing capability

*enable each port to be clocked from independent clock sources for data applications.


Platform Support
Feature
1721,1751,1760
 1841 (data only)
2600XM
2691
3662
3700
 2800
3800
VWIC2-XXXX 12.3(14)T 12.3(14)T 12.3(14)T 12.3(14)T 12.3(14)T 12.3(14)T 12.3(14)T 12.3(14)T

* Please see the following link for more info about WIC/NM/VIC constraint :

** Data applications require at a minimum the IP Base feature set license and voice applications require at a minimum the IP Voice feature set license.

Return to Top

Virtual Private Network (VPN) modules




Product
 Description Performance
AIM-VPN/BP DES/3DES VPN Encryption AIM - Base Performance 2-6Mb/s, 150 tunnels max
AIM-VPN/EP DES/3DES VPN Encryption AIM - Enhanced Performance 4-14Mb/s, 400 tunnels
(2650 performance)
AIM-VPN/HP DES/3DES VPN Encryption AIM - High Performance 10-24Mb/s, 900 tunnels max
AIM-VPN/BPII DES/3DES/AES VPN Encryption/Compression Module for 2600XM 20-Mbps 3DES performance in 2611 and up to 22 Mbps on the Cisco 2651XM
AIM-VPN/EPII DES/3DES VPN Encryption AIM - High Performance up to 150 Mb/s, 2000 tunnels max
AIM-VPN/HPII DES/3DES VPN Encryption AIM - High Performance up to 180 Mb/s, 2000 tunnels max
NM-VPN/MP DES/3DES VPN Encryption NM for 3620/3640 - Mid Performance 5-12Mb/s, 400 tunnels max
AIM-VPN/BPII-PLUS DES/3DES/AES Encryption AIM - Base Performance
up to 20-22 Mbps
AIM-VPN/EPII-PLUS DES/3DES/AES Encryption AIM - Enhanced Performance up to 80-150 Mbps
AIM-VPN/HPII-PLUS DES/3DES/AES Encryption AIM - High Performance up to 180 Mbps


Platform Support
IOS Support
 1800
2600
2600XM
 2800
3620
 3631 3640 3660 2691, 3725
3745
3825 3845
AIM-VPN/BP Not Supported 12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.3(1) 12.2(12), 12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported
AIM-VPN/EP Not Supported 12.2(2)T, 12.3(1) 12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T Not Supported Not Supported Not Supported Not Supported Not Supported 12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T Not Supported Not Supported Not Supported
AIM-VPN/HP Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported 12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.2(11)YT, 12.3(1), 12.3(2)T Not Supported 12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T Not Supported Not Supported
AIM-VPN/BPII Not Supported 12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.3(1) 12.2(12), 12.2(8)T1, 12.2(11)YT, 12.3(1), 12.3(2)T Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported
AIM-VPN/EPII Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported 12.2(13)T, 12.3(1), 12.3(2)T Not Supported Not Supported Not Supported
AIM-VPN/HPII Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported 12.2(13)T, 12.3(1), 12.3(2)T Not Supported 12.2(13)T, 12.3(1), 12.3(2)T Not Supported Not Supported
NM-VPN/MP Not Supported Not Supported Not Supported Not Supported 12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.3(1) Not Supported 12.1(3a)XI1, 12.2(1), 12.2(2)T, 12.3(1), 12.3(2)T Not Supported Not Supported Not Supported Not Supported Not Supported
AIM-VPN/BPII-PLUS 12.3(8)T Not Supported 12.3(5c)/12.3(6), 12.3(7)T Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported
AIM-VPN/EPII-PLUS Not Supported Not Supported Not Supported 12.3(8)T Not Supported Not Supported Not Supported Not Supported 12.3(5c)/12.3(6), 12.3(7)T Not Supported 12.3(11)T Not Supported
AIM-VPN/HPII-PLUS Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported 12.3(5c)/12.3(6), 12.3(7)T Not Supported 12.3(5c)/12.3(6), 12.3(7)T Not Supported 12.3(11)T

Software Prerequisites: Cisco IOS software with the "IPSEC" or "Advanced Security" or higher feature set and maximum ONE Encryption modules/AIMs per Router


Return to Top

EtherSwitch 4- and 9-Port High-Speed WAN Interface Cards

HWIC-4ESW


HWIC-D-9ESW



Product Description Features
HWIC-4ESW
 4-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC
  • 4 or 9 10BASE-T/100BASE-TX ports
  • Autosensing, Autonegotiation, and Auto-MDIX
  • Integrated switching
  • 802.1P QoS (Traffic Prioritization)
  • 802.1Q Trunking
  • 802.1D Spanning Tree Protocol
  • Voice VLAN (VLAN) 1
HWIC-4ESW-POE 4-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC with power daughter card
HWIC-D-9ESW
 9-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC
HWIC-D-9ESW-POE 9-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC with power daughter card

Note:

  1. This part number (HWIC-4ESW-POE / HWIC-D-9ESW-POE) should be ordered only if you require in-line power.
    You must also order the matching internal power unit to support in-line power on a Cisco 2800 or Cisco 3800 router.
  2. The HWIC-D-9ESW card provides inline power through only 8 of its ports, ports 0 through 7.
    3. The ninth port (port 8) is intended to be a stacking port, and as such, does not support inline power.
  3. The inline power daughter cards are NOT interchangeable between the 4-port and the (8+1)-port HWICs.
  4. There is no option to unstack two HWIC switches. When two HWIC switches are in the same chassis,
    they can operate only in stacked mode. If the user configures the switches to operate unstacked, the switches
    will not operate correctly. All combinations of HWIC switches may be stacked: two HWIC-D-9ESWs, an
    HWIC-D-9ESW with an HWIC-4ESW, or two HWIC-4ESWs.

Product Description
PWR-2801-AC-IP= Cisco 2801 AC inline power supply
PWR-2811-AC-IP= Cisco 2811 AC inline power supply
PWR-2821-51-AC-IP= Cisco 2821 and Cisco 2851 AC inline power supply
PWR-3825-AC-IP= Cisco 3825 AC-IP power supply
PWR-3845-AC-IP= Cisco 3845 AC-IP power supply

Platform Support
IOS Support
 1800 2600 2600XM 2800 3620 3631 3640,
3640A,
3660		 2691,
3725,
3745		 3800
HWIC-4ESW 12.3(8)T4 Not supported Not supported 12.3(8)T4 Not supported Not supported Not supported Not supported 12.3(11)T
HWIC-4ESW-POE Not supported
HWIC-D-9ESW Not supported
HWIC-D-9ESW-POE

Note: The Cisco 2801 can take 2 single-wide (HWIC) or 2 double-wide (HWIC-D) whilst the Cisco 2811, 2821, 2851 can accept 4 single-wide (HWIC) or 2 double-wide (HWIC-D).

Return to Top

HWIC-4A/S




4-port multiprotocol low speed asynchronous/synchronous HWIC.
Protocols supported are Async (SLIP), Async (PPP), HDLC, Bisync, and transparent.

Interfaces supported are as follows:
- In both DTE and DCE formats: V35, X21, RS-232, and RS-449
- In DTE format only: EIA-530 and EIA-530A

The maximum data rate supported is 256 kbps per port (synchronous).
The maximum data rate supported is 256 kbps per port 230.4 kbps (asynchronous).

Platform Support

Platform
Cisco 1600 Cisco 1700 Cisco 1841 Cisco 2600 and 2600XM Cisco 2800 Cisco 3600 Cisco 3700 Cisco 3800
HWIC-4A/S Not supported Not supported 12.3(14)T Not supported 12.3(14)T Not supported Not supported 12.3(14)T

Notes:
Connector type is Smart Serial. Available cables can be found here .

Return to Top

HWIC-8A/S-RS232




The 8-port RS-232 asynchronous/synchronous HWIC provides 8 asynchronous/synchronous
RS-232 interfaces in both DCE and DTE formats. Data rates of up to 230.4 kbps are supported
in asynchronous mode, and up to 256 kbps in synchronous mode.

The 8-port RS-232 asynchronous/synchronous HWIC uses a quad cable, consisting of a 68-pin
connector on the interface card end and four DB25 connectors on the system end (as pictured).
This cable is available in either DCE or DTE format. The cables include:

Cables
Product Number Cable Type Length Connector Type

CAB-HD4-232FC

4-port EIA-232 DCE 10 ft (3m) Female DB-25

CAB-HD4-232MT

4-port EIA-232 DTE 10 ft (3m) Male DB-25

Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1841 Cisco 2600 and 2600XM Cisco 2800 Cisco 3600 Cisco 3700 Cisco 3800
HWIC-8A/S-RS232 Not supported Not Supported 12.3(14)T Not supported 12.3(14)T Not supported Not supported 12.3(14)T

Return to Top

HWIC-8A




The 8-port asynchronous HWIC, provides 8 asynchronous RS-232 interfaces in DTE format, at
data rates of up to 230.4 kbps.

The 8-Port Asynchronous High-Speed WAN Interface Card and 16-Port Asynchronous High-Speed
WAN Interface Card use one (HWIC-8A) or two (HWIC-16A) high-density 8-port connectors. The
8-port asynchronous cable provides the high-density connector on one end and eight RJ-45 plugs
on the other. RJ-45- to DB-25 modular adapters are used to convert the RJ-45 to DB-25 DTE or
DB-25 DCE connections.


Cables
Product Number Cable Type Length Connector Type

CAB-HD8-ASYNC

8-port EIA-232 10 ft (3m) RJ-45

CAB-HD8-KIT

8-port EIA-232 plus eight CAB-25AS-MMOD 10 ft (3m) Male DB-25

CAB-25AS-MMOD

RJ-45 to DB-25 adapter   Male DB-25

CAB-25AS-FDTE

RJ-45 to DB-25 adapter   Female DB-25

Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1841 Cisco 2600 and 2600XM Cisco 2800 Cisco 3600 Cisco 3700 Cisco 3800
HWIC-8A Not supported Not Supported 12.3(14)T Not supported 12.3(14)T Not supported Not supported 12.3(14)T

Return to Top

HWIC-AP-G-X



  1. Mounting screws
  2. RP-TNC connectors
  3. OK LED for the 802.11b/g radio
  4. DATA LED for the radio

This access point high-speed WAN interface card (AP HWIC) is a single-wide interface card that houses one radio (single-mode) for connection to a wireless LAN. This interface card operates as an access point when installed in a modular access router with AP HWIC support.

Dual-mode AP carrier card with RP-TNC connectors, dual antennas, and two radios: one 2.4-GHz 802.11b/g
radio and one 5-GHz 802.11a radio. The following are the Cisco part numbers and the geographic regions
for which the interface cards are configured:
– HWIC-AP-G-A—North America
– HWIC-AP-G-E—Europe
– HWIC-AP-G-J—Japan

Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1841 Cisco 2600 and 2600XM Cisco 2800 Cisco 3600 Cisco 3700 Cisco 3800
HWIC-AP-AG-x Not supported Not Supported 12.4 T Not supported 12.4 T Not supported Not supported 12.4 T

Notes:
- RP-TNC Swivel-mount Omnidirectional Dipole antennas are included with the HWICs.
- Only one AP HWIC is supported in the router at a time. Installation of two AP HWICs in the router is not supported.


Return to Top

HWIC-AP-AG-x



  1. Mounting screws
  2. RP-TNC connectors
  3. OK LED for the 802.11b/g radio
  4. OK LED for the 802.11b/g radio
  5. DATA LED for the 802.11a radio
  6. DATA LED for the 802.11b/g radio

This access point high-speed WAN interface card (AP HWIC) is a single-wide interface card that houses
two radios (dual-mode) for connection to a wireless LAN. This interface card operates as an access point
when installed in a modular access router with AP HWIC support.

Dual-mode AP carrier card with RP-TNC connectors, dual antennas, and two radios: one 2.4-GHz 802.11b/g
radio and one 5-GHz 802.11a radio. The following are the Cisco part numbers and the geographic regions
for which the interface cards are configured:
– HWIC-AP-AG-A—North America
– HWIC-AP-AG-E—Europe
– HWIC-AP-AG-J—Japan


Platform Support
Platform Cisco 1600 Cisco 1700 Cisco 1841 Cisco 2600 and 2600XM Cisco 2800 Cisco 3600 Cisco 3700 Cisco 3800
HWIC-AP-AG-x Not supported Not Supported 12.4 T Not supported 12.4 T Not supported Not supported 12.4 T

Notes:
- RP-TNC Swivel-mount Omnidirectional Dipole antennas are included with the HWICs.
- Only one AP HWIC is supported in the router at a time. Installation of two AP HWICs in the router is not supported.
- The 4.9-GHz band is not supported.

Return to Top

HWIC-1ADSL ( 1 port ADSL/Pots)




Supports ADSL over basic telephone service with Annex A ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)

Supports Dying Gasp function and has one RJ-11 ADSL interface

Platform Support
Platform Cisco 1841 Cisco 2800 Cisco 3800
HWIC-1ADSL 12.4(4)T Base 12.4(4)T Base 12.4(4)T Base

Supports ADSL over basic telephone service with Annex A ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)
Supports Dying Gasp function and has one RJ-11 ADSL interface

* ADSL2+ downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps

* ADSL2 downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps


Return to Top

HWIC-ADSL-B-S/T (2 port ADSL over Pots)




Has one backup ISDN BRI S/T port (data only) and 1 ADSL over Pots port

Supports ADSL over basic telephone service with Annex A ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)

Supports Dying Gasp function and has one RJ-11 ADSL interface


Platform Support
Platform Cisco 1841 Cisco 2800 Cisco 3800
HWIC-ADSL-B-S/T 12.4(6)T Base 12.4(6)T Base 12.4(6)T Base

* ADSL2+ downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps

* ADSL2 downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps

Return to Top

HWIC-1ADSLI ( 1 port ADSL over ISDN)




Supports ADSL over ISDN with Annex B G.992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)

Supports reach-extended ADSL2 standard (G.992.3) Annex L

Supports Dying Gasp function and has one RJ-11 ADSL interface


Platform Support
Platform Cisco 1841 Cisco 2800 Cisco 3800
HWIC-1ADSLI 12.4(4)T Base 12.4(4)T Base 12.4(4)T Base

* ADSL2+ downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps

* ADSL2 downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps

Return to Top

HWIC-ADSLI-B-S/T (2 port ADSL over ISDN)




Has one backup ISDN BRI S/T port (data only) and 1 ADSL over ISDN port

Supports ADSL over ISDN with Annex B G.992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)

Supports reach-extended ADSL2 standard (G.992.3) Annex L

Supports Dying Gasp function and has one RJ-11 ADSL interface


Platform Support
Platform Cisco 1841 Cisco 2800 Cisco 3800
HWIC-ADSLI-B-S/T 12.4(6)T Base 12.4(6)T Base 12.4(6)T Base

* ADSL2+ downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps

* ADSL2 downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps

Return to Top

Aladdin eToken




Aladdin eToken is a USB-based smartcard device used for strong user authentication and secured storage. Combining eToken drivers with Cisco integrated services routers helps Cisco partners mount router configuration on eToken drivers and securely send them to end customers. End customers will then upload the configuration directly to the router by attaching eToken to the new USB port.

The USB eToken is supplied by Aladdin Knowledge Systems. To order eTokens or for more information, please contact Aladdin Knowledge Systems at http://www.ealaddin.com/etoken/cisco.


Platform Support
IOS Support Cisco 1800 Cisco 2800 Cisco 3800
Aladdin eToken 12.3(14)T 12.3(14)T 12.3(14)T

Return to Top

USB Flash

The USB Flash feature provides an optional secondary storage capability. Images, configurations, or other files can be copied to or from the Cisco USB Flash memory with the same reliability as storing and retrieving files using the Compact Flash card.


Platform Support
Part Number Description 1800 2800 3800
MEMUSB-64FT64 MB USB Flash12.3(14)T12.3(14)T12.3(14)T
MEMUSB-128FT128 MB USB Flash12.3(14)T12.3(14)T12.3(14)T
MEMUSB-256FT256 MB USB Flash12.3(14)T12.3(14)T12.3(14)T

Return to Top