| >set systemname remote | Sets the system name of the remote router. This system name "remote" will have to match the user profile in the main site router for authentication purposes. The system name is sent to the far end router as the userid in ppp authentication.
| remote>set ppp secret client (prompts for chap password)
| Sets the chap secret that will be used to send the chap magic number to the main router when the main router challenges the remote router.
| Enter Password: doc | Prompted to enter the password/secret. "doc" is entered as the chap secret.
| ReEnter Password: doc |
Prompted to reenter password/secret.
| remote>set encapsulation ppp | Sets the encapsulation for the user profile default template to ppp.
| remote>set ppp authentication incoming chap | Sets the ppp authentication for incoming calls to be forced to authenticate via chap.
| remote>set user HQ | Creates the user profile "HQ". Changes to the user profile "HQ". This user profile name has to match the system name of the main site router. The system name is received from the far end as the userid during ppp authentication.
| remote:HQ>set bridging on |
Turns bridging on in the user profile "HQ".
| remote:HQ>set timeout 120 | Sets the idle timeout parameter to 120 seconds. If there is no interesting traffic to be forwarded across the ISDN connection for 120 seconds then the call will be disconnected.
| remote:HQ>set 1 number 14085221234 | Sets the phone numbers in the user profile "HQ" that are used to dial out to the main router. In this case, the main router has the same phone number for both b channels, so the same number is set in link 1 and link 2. Link 2 is for bandwidth on demand. It will not automatically connect if link 1 isn't already connected. Link 2's number is NOT used for a secondary dial number, it is for bandwidth on demand only.
| remote:HQ>set 2 number 14085221234 | Sets the phone numbers in the user profile "HQ" that are used to dial out to the main router. In this case, the main router has the same phone number for both b channels, so the same number is set in link 1 and link 2. Link 2 is for bandwidth on demand. It will not automatically connect if link 1 isn't already connected. Link 2's num
| remote:HQ>set ppp secret host (promts for chap password)
| Sets the chap secret that will be used to send the chap magic
| Enter Password: happy | Prompted to enter the password/secret. "happy" is entered as the chap secret.
| ReEnter Password: happy | Prompted to reenter the password/secret to ensure consistency.
| remote:HQ>set ppp authentication outgoing chap | Sets the ppp authentication on outbound calls to chap. This setting will force bi-directional authentication via chap on the outgoing call basis. When the remote router calls the main router, the remote router will force the main router to authenticate with it via chap.
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
|
|---|
