navbar
Technical Tips

Cisco IOS with Serial Async Dial-in Using PPP


This configuration example demonstrates how to use Windows95 to dial into a Cisco router via PPP using serial ports 2 and 3.
service udp-small-servers
service tcp-small-servers
!
hostname router
!
enable secret 
enable password 
!
username route password 
isdn switch-type basic-ni1
!
interface Ethernet0
 ip address 192.168.161.1 255.255.255.0
 no mop enabled
!
interface Serial0
 no ip address
 shutdown
!
interface Serial1
 no ip address
 shutdown
!
interface Serial2
 physical-layer async
 ip unnumbered Ethernet0
 ip tcp header-compression passive
encapsulation ppp
 keepalive 10
 async mode interactive
 peer default ip address 192.168.161.25
 ppp authentication chap
!
interface Serial3
 physical-layer async
 ip unnumbered Ethernet0
 ip tcp header-compression passive
 encapsulation ppp
 keepalive 10 
 async mode interactive
 peer default ip address 192.168.161.26
 ppp authentication chap
!
interface BRI0
 ip unnumbered Ethernet0
!
router igrp 1
 network 192.168.161.0
!
!
line con 0
 exec-timeout 0 0
line 2
 autoselect ppp
 login local
 modem InOut
 transport input all
 rxspeed 38400
 txspeed 38400
 flowcontrol hardware
line 3
 autoselect ppp
 modem InOut
 transport input all
 rxspeed 38400
 txspeed 38400
 flowcontrol hardware
line aux 0
 transport input all
line vty 0 4
 password 
 login
!
end


Posted: Tue Nov 26 11:54:23 PST 1996