This sample configuration describes the commands necessary for connecting a Cisco 700 Series router to an Ascend router.
"Atlanta" Router Configuration
set systemname Atlanta
set ppp secret client
gocisco1
gocisco1
set encapsulation ppp
set ppp authentication
incoming chap
cd lan
set bridging off
set ip routing on
set ip 10.1.1.1
set subnet 255.0.0.0
set user Ascend
set bridging off
set ip routing on
set ip 0.0.0.0
set ip framing none
set ip route destination 0.0.0.0/0
gateway 192.168.2.1
set 1 number 14085551234
set 2 number 14085551234
set
ppp authentication outgoing none
"Ascend" Router Configuration:
System Config Name Ascend
Recv Authentication CHAP
Mod Config Ethernet LAN address 192.168.2.1/24
Connection Profile Station Name Atlanta
Connection Profile LAN address 10.1.1.1/8
Connection Profile Recv Password gocisco1
Note: In this example, the Ascend unit does not allow bidirectional authentication when being called.
Note: The IP addresses in this example configuration are for Private Internets as defined in RFC 1597.
Revised 4SEP97:1030 by Jaime Sainez
Home | What's New | Login | Register | Feedback | Navigate | Search | Help