|
|
This chapter describes the utilities that can be used with a Cisco Aironet Wireless LAN Adapter and the Windows CE 2.11 or 3.00 operating system.
The following topics are covered in this chapter:
If your computer's operating system is Windows CE 2.11 or 3.00, the following utilities are available for use with your client adapter:
The client utilities are contained on the Cisco Aironet Series Wireless LAN Adapters CD that shipped with the client adapter. If your computer does not have a CD-ROM drive, you can download the utilities from Cisco's web site at http://www.cisco.com/public/sw-center/sw-wireless.shtml. Under "Wireless Software Products - Cisco Aironet Drivers and Utilities," select your computer's operating system and the appropriate utility.
The client utilities for Windows CE are installed with the driver. Refer to the Cisco Aironet Wireless LAN Adapters Hardware Installation Guide for instructions on installing the driver and the client utilities.
To open any of the client utilities on your Windows CE device, select Start > Programs > Cisco and the utility you wish to open. The screen for that utility appears.
Refer to Chapter 6 for specific information on using the client utilities.
The buttons on the client utility screens are used to perform specific functions. Table 5-1 describes the most common buttons.
| Button | Description |
|---|---|
X | Exits the screen without saving any changes |
Initiates a test | |
Displays the default value of each parameter | |
About | Displays the version of the client utility |
Posted: Mon Apr 22 00:51:15 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.