Table of Contents
Cisco IOS Command References Master Index, Release 12.0
Symbols Numerics A B C D E F G H I K L M N O P Q R S T U V W X Z
Symbols
- ! character
- ping command output FR-529
- # character
- privileged EXEC mode prompt FR-8
- $ character in regular expressions DR-913
- * character in regular expressions DR-912
- + character in regular expressions DR-912
- . character
- ping command output FR-529
- /etc/printcap filev
- modifying for printing FR-71
- > prompt FR-283
- ? character in regular expressions DR-912
- ? command FR-xv
- ^ character in regular expressions DR-913
- _ character in regular expressions DR-914
- | P3R-148
Numerics
- 100VG AnyLAN port adapter
- configuring IR-126
- displaying information IR-252
- 7-bit character set
- changing for session FR-96
- 8-bit character set
- EXEC and configuration commands
- changing for a session FR-85
- setting default value FR-50
- setting for line FR-60
- hardware databits
- changing for session FR-79
- configuring on a line FR-48
- software character bits
- changing for session FR-80
- setting for line FR-49
- special character width
- changing for session FR-96
- configuring default FR-51
- configuring for line FR-75
- 90-compatible OUI form BR-94
A
- AAA/TACACS+
- arap authentication DR-650
- enable login authentication DR-179
- aaa accounting command SR-70
- aaa accounting suppress null-username command SR-73
- aaa accounting update command SR-74
- aaa authentication arap command SR-4
- aaa authentication banner command SR-6
- aaa authentication enable default command SR-8
- aaa authentication fail-message command SR-10
- aaa authentication login command SR-12
- aaa authentication nasi command SR-14
- aaa authentication password-prompt command SR-16
- aaa authentication ppp command SR-18
- aaa authentication username-prompt command SR-20
- aaa authorization command SR-58
- aaa authorization config-commands command SR-61
- aaa authorization reverse-access command SR-62
- AAA configuration
- virtual profiles, use with DR-783
- aaa nas-port extended command SR-86
- aaa new-model command SR-22
- aaa processes command SR-23
- AAL
- displaying WR-101, WR-108, WR-114
- AAL3/4
- ATM
- (example) WR-4
- enabling WR-4
- AAL5 NLPID WR-109, WR-115, WR-122
- abbreviating commands
- context-sensitive help FR-xv
- software recognition FR-3
- ABR
- configuring
- (example) WR-3
- rate-factor
- (example) WR-5
- configuration WR-5
- abr command WR-2
- absolute DR-21
- absolute-timeout command DR-174, FR-67
- accept-lifetime command P1R-478
- accept reverse charging
- X.25 WR-324
- access-class command DR-366, P1R-96, WR-284
- access control
- AppleTalk
- access group P2R-21
- distribute list P2R-37, P2R-39
- zone filter P2R-57
- zones P2R-2
- ARA DR-653, DR-654, DR-661
- DECnet P3R-135, P3R-147
- IPX P2R-210, P2R-246
- LAT
- assigning names to group lists DR-389
- connections DR-366
- defining a group list DR-395
- specifying access conditions to nodes DR-386
- VINES P3R-57 to P3R-59
- XNS
- extended P3R-330
- standard P3R-333
- access-enable command SR-142
- access-expression command BR-84
- access expressions, configuring BR-84
- access groups
- DECnet P3R-117
- IP P1R-131
- access-list (DECnet extended) command P3R-106
- access-list (DECnet standard) command P3R-112
- access-list (encryption) command SR-206
- access-list (filter connect initiate packets) command
- DECnet P3R-108
- access-list (IPX extended) command P2R-206
- access-list (IPX standard) command P2R-210
- access-list (standard) command IR-3
- access-list (type-code) command IR-4
- access-list (XNS extended) command P3R-330
- access-list (XNS standard) command P3R-333
- access-list additional-zones command P2R-2
- access-list cable-range command P2R-4
- access list command
- with regular expressions DR-910
- (example) DR-915
- access-list command
- access-list (standard-ibm) BR-5
- access-list (type-code-ibm) command BR-6
- IP
- extended P1R-98, P1R-116, P1R-122
- standard P1R-109
- IPX
- extended P2R-206, P2R-229
- NLSP route aggregation summarization P2R-213
- SAP P2R-216
- violation logging P2R-206, P2R-229
- SRB BR-86
- transparent bridging
- extended BR-2
- type-code BR-6
- access-list includes command P2R-6
- access-list nbp command P2R-8
- access-list network command P2R-11
- access-list other-access command P2R-13
- access-list other-nbps command P2R-15
- access-list rate-limit command QR-2
- access lists
- Apollo Domain
- applying to an interface P3R-2
- creating P3R-3
- AppleTalk
- network numbers
- cable range P2R-4
- creating P2R-11
- including P2R-6
- interfaces P2R-21
- other access P2R-13
- within P2R-17
- zones, creating P2R-2, P2R-19
- AppleTalk, displaying P2R-110
- bridging (table) BR-937
- DDR
- dialing, controlling DR-669, DR-697, DR-725
- types and numbers, supported (table) DR-669, DR-697, DR-725
- DECnet
- extended P3R-106
- filter connect initiate packets P3R-108
- standard P3R-112
- dynamic
- temporary entries, clearing manually SR-142
- Ethernet type codes (table) BR-937
- IBM NetBIOS
- byte offset BR-189
- IP
- applying on inbound or outbound interfaces P1R-131
- BGP access list filters P1R-387, P1R-405
- extended P1R-98, P1R-135
- fragments P1R-98
- logging message P1R-119, P1R-124, P1R-163
- named P1R-133
- setting on virtual terminal lines P1R-96
- standard P1R-109
- violations, accounting for P1R-135
- violations, logging P1R-101, P1R-119, P1R-124, P1R-135, P1R-163
- IP violations, logging P1R-110
- IPX
- extended P2R-206
- named P2R-248
- NetBIOS P2R-300, P2R-302, P2R-409
- NLSP route aggregation P2R-213
- routing table filtering P2R-285
- SAP P2R-216
- standard P2R-210
- LSAP
- using in access expressions BR-84
- netbios-host BR-85
- rate-limited QR-55
- rate limit statistics (table) QR-56
- SNAP type
- using in access expressions BR-84
- SRB
- Ethernet type codes (table) BR-937
- filtering by protocol type BR-86
- traffic shaping based on QR-83
- transparent bridging
- assigning to bridge group BR-30
- assigning to interface BR-26, BR-30
- associating with interface and bridge group BR-38
- filtering MAC addresses BR-33
- qualifications for using BR-3
- VINES
- displaying P3R-25
- extended P3R-54
- simple P3R-57
- standard P3R-59
- XNS
- extended P3R-330
- standard P3R-333
- See also IPSec
- access list violations
- IP
- accounting P1R-135
- displaying P1R-173
- displaying (example) P1R-174
- logging P1R-101, P1R-110, P1R-119, P1R-124, P1R-135, P1R-163
- access-list within command P2R-17
- access-list zone command P2R-19
- access-profile command SR-25
- replace command form
- (caution) SR-26
- using per-user configuration
- (caution) SR-26
- access routers
- pooling, common hostname DR-598
- access servers
- four services supported DR-173
- access-template command SR-143
- accounting
- DECnet
- database threshold P3R-122
- deleting database entries P3R-114
- enabling P3R-118
- filters P3R-120
- maximum transit entries P3R-123
- accounting, IPX
- configuring P2R-250
- database threshold P2R-254
- deleting database entries P2R-221
- enabling P2R-250
- filters P2R-252
- maximum transit entries P2R-255
- accounting command SR-76
- acc-qos command VR-4
- activation character
- setting FR-46, FR-543
- activation-character command FR-46, FR-543
- adapter command BR-738
- address command SR-388
- addressed-key command SR-389
- addresses
- alternate destinations, defining WR-326
- primary IP P1R-14
- secondary IP P1R-14
- SMDS
- displaying assigned WR-265, WR-266
- effect of bridging WR-269
- mapping IP multicast WR-281
- multicast WR-274
- multicast ARP WR-276
- structure of WR-269
- X.121
- called, suppressing WR-385
- calling
- suppressing WR-386
- updating WR-396
- setting WR-325
- address ranges, summarizing
- IS-IS for IP P1R-293, P1R-352
- OSPF P1R-233
- address-registration
- ATM
- (example) WR-6
- Address Resolution Protocol
- See ARP
- address translation gateway
- See ATG, DECnet
- adjacency
- TARP blacklist
- displaying P3R-295
- setting P3R-306
- adjacency levels, IS-IS for IP, specifying P1R-329, P1R-330
- adjacent-cp-name command BR-556
- administrative distance
- BGP, setting P1R-385
- defaults (table) P1R-297, P1R-480
- IP Enhanced IGRP, setting P1R-297
- OSPF default P1R-298, P1R-480
- RIP default P1R-298, P1R-480
- administrative filtering
- statically configured stations BR-8
- ADT
- primary end of link
- specifying BR-304
- Advanced Peer-to-Peer Networking
- See APPN
- AESOs
- attaching to interfaces SR-448
- agent set control unit
- See ALPS, ASCU
- aggregate address, configuring for BGP P1R-356
- aggregate-address command P1R-356
- Airline Product Set
- See ALPS
- algorithms
- encryption
- See IKE, algorithms
- hash
- See IKE, algorithms
- alias command FR-618
- aliases
- creating for commands FR-618
- default FR-618
- displaying FR-672
- all-nets flooding
- IPX P2R-278
- all-routes explorer packets
- definition BR-195
- ALPS
- alarms
- ASCU BR-897
- circuits BR-898
- peer BR-899
- ASCU
- displaying status BR-930
- logical address BR-892
- physical address BR-893
- poll BR-900
- circuit
- activating BR-895, BR-901
- deactivating BR-927
- default BR-896
- definition BR-894
- disabling BR-906
- displaying status BR-931
- message queue BR-908
- remote CPE BR-894
- counters BR-928
- error message display BR-902
- error states BR-913, BR-919
- HLD definition BR-909
- IP address BR-910
- messages BR-911
- multiplexing BR-912
- P1024B protocol BR-929
- peer
- alarms BR-899
- displaying status BR-933
- partner CPE BR-917
- TCP BR-916
- polls
- intervals BR-915
- limits BR-923
- minimum requirement BR-914
- service messages
- content BR-922
- intervals BR-920
- lists BR-921
- TCP
- peer BR-916
- TCP peers BR-907
- timeouts BR-924, BR-925
- X.121 address BR-926
- X.25 interface BR-903
- X.25 virtual circuit BR-904
- alps a1-map a2-map command BR-892
- alps ascu command BR-893
- alps circuit command BR-894
- alps connection-type permanent command BR-895
- alps default-ckt command BR-896
- alps enable-alarms ascu command BR-897
- alps enable-alarms circuit command BR-898
- alps enable-alarms peer command BR-899
- alps enable-ascu command BR-900
- alps enable-circuit command BR-901
- alps error-display command BR-902
- alps host-hld host-link command BR-903
- alps hostlink command BR-904
- alps idle-timer command BR-906
- alps keepalive command BR-907
- alps lifetime-timer command BR-908
- alps local-hld remote-hld command BR-909
- alps local-peer command BR-910
- alps max-msg-length command BR-911
- alps mpx command BR-912
- alps n1 command BR-913
- alps n2 command BR-914
- alps poll-pause command BR-915
- alps primary-peer command BR-916
- alps remote-peer command BR-917
- alps retry-option command BR-919
- alps service-msg-interval command BR-920
- alps service-msg-list command BR-921
- alps service-msg-list number command BR-922
- alps servlim command BR-923
- alps t1 command BR-924
- alps t2 command BR-925
- alps translate command BR-926
- alt-dial command VR-6
- AMI line coding IR-390
- anchoring
- regular expressions DR-913
- answer-address command VR-7
- AO/DI
- BAP number
- formats DR-874
- prefix DR-874
- client
- enabling DR-878
- mapping DR-879
- multilink PPP bundle
- receive only mode DR-877
- apollo access-group command P3R-2
- apollo access-list command P3R-3
- Apollo Domain
- access lists
- applying to an interface P3R-2
- creating P3R-3
- ARP table, displaying entries P3R-11
- interfaces, displaying status P3R-12
- load sharing P3R-5
- maximum paths, setting P3R-5
- parallel paths, choosing between P3R-5
- routing
- enabling P3R-8
- interface, enabling on P3R-6
- routing table entries
- adding P3R-7
- displaying P3R-14
- update interval P3R-9
- static routes, adding to routing table P3R-7
- traffic, displaying statistics P3R-16
- apollo maximum-paths command P3R-5
- apollo network command P3R-6
- apollo route command P3R-7
- apollo routing command P3R-8
- apollo update-time command P3R-9
- AppleTalk
- access control
- access group P2R-21
- distribute list P2R-37, P2R-39
- zone filter P2R-57
- zones P2R-2
- access lists
- cable range P2R-4
- displaying P2R-110
- interface cable range P2R-21
- network numbers P2R-21
- other access P2R-13
- range-overlaps P2R-6
- within P2R-17
- network numbers, creating P2R-11
- zones, creating P2R-2, P2R-19
- addresses
- format P2R-24
- remapping P2R-46
- adjacent networks P2R-112
- adjacent routers P2R-150
- ARP table entries
- deleting P2R-103
- displaying P2R-114
- gleaning P2R-59
- ARP table update interval P2R-25, P2R-27, P2R-29
- AURP
- enabling P2R-77
- last-heard-from timer P2R-30
- private path database P2R-117
- routing update interval P2R-31
- tunnel interface, assigning AppleTalk domain-group number P2R-41
- update-events queue P2R-116
- cable ranges
- assigning to interface P2R-32
- remapping P2R-46
- CAP
- compatibility
- checksum P2R-33
- Columbia AppleTalk Package
- See CAP
- discovery mode P2R-35
- enabling P2R-23, P2R-32, P2R-35
- startup process P2R-35
- domain
- hop count P2R-43
- information, displaying P2R-121
- number, assigning P2R-41
- eigrp-bandwidth-percent command P2R-50
- eigrp interfaces, displaying P2R-123
- eigrp log-neighbor-changes command P2R-51
- Enhanced IGRP
- enabling P2R-77
- hello packets P2R-53
- hold time P2R-53
- neighbors
- displaying P2R-125
- query packets P2R-52
- route redistribution P2R-83
- split horizon P2R-52
- timers, adjusting P2R-53
- topology (table) P2R-127
- update packets P2R-52
- EtherTalk P2R-1
- extended interface
- assigning cable range P2R-32
- extended interfaces P2R-35
- fast switching P2R-82
- configuring P2R-82
- displaying cache entries P2R-119
- FDDITalk P2R-1, P2R-76
- filters
- data packet, applying P2R-21
- GZL, applying P2R-39, P2R-57
- partial zone P2R-75
- routing table P2R-37, P2R-39
- floating static routes P2R-90
- displaying P2R-164
- nonextended networks P2R-92
- free-trade zone P2R-56
- GZL
- filters P2R-39, P2R-57
- replies P2R-39, P2R-57
- hop count P2R-43
- interenterprise routing
- addresses
- remapping P2R-46
- AURP tunnel interface P2R-41
- cable ranges
- remapping P2R-46
- domain name P2R-45
- domain number P2R-45
- domains P2R-45
- hop count P2R-43
- remap
- displaying P2R-153
- remapping P2R-46
- interfaces
- configuring dynamically P2R-35
- displaying P2R-135
- domain number, assigning P2R-41
- internetwork parameters, displaying P2R-132
- IPTalk
- /etc/services file P2R-63
- IP encapsulation, configuring P2R-61
- UDP port numbers P2R-63
- Kinetics IPTalk
- LocalTalk P2R-1
- MacIP
- addresses, allocating P2R-67, P2R-71
- clients, displaying P2R-139
- servers, displaying P2R-140
- servers, establishing P2R-69
- traffic statistics P2R-144, P2R-166
- maximum paths, defining P2R-73
- NBP
- lookup interval P2R-74
- lookup type P2R-65
- name registration (table) P2R-148
- registered entities P2R-201
- services, displaying P2R-146
- tests P2R-201
- neighbor table P2R-104
- network events, logging P2R-55
- nonextended interface, assigning address P2R-23
- Phase 1/Phase 2 networks
- compatibility P2R-79
- pre-FDDITalk packets, enabling recognition P2R-76
- proxy network numbers, assigning P2R-79
- routes
- poisoned P2R-158, P2R-160
- routing P2R-84
- extended interface P2R-35
- routing protocol, specifying P2R-77
- routing table
- displaying entries P2R-156
- update timers, setting P2R-95
- routing updates
- interval timer P2R-86
- routing updates
- advertising P2R-81
- retransmission, disabling P2R-89
- strict checking P2R-94
- stub mode, enabling P2R-87
- timers, setting P2R-95
- RTMP
- enabling P2R-77
- routes without zones P2R-81
- routing updates, disabling transmission P2R-89
- strict checking of routing updates P2R-94
- stub mode, enabling P2R-87
- service types (table) P2R-65
- SMDS, configuring over WR-274
- SMRP
- enabling for P2R-198
- fast-switching, enabling on a port P2R-196
- fast-switching cache table, clearing entries P2R-108
- fast-switching cache table, displaying P2R-181
- sockets P2R-162
- static routes
- displaying P2R-164
- overriding P2R-90, P2R-92
- test mode, entering P2R-201
- TokenTalk P2R-1
- traffic statistics P2R-166
- tunneling, Cayman IR-408, P1R-98
- ZIP
- query interval P2R-99
- reply filter, creating P2R-100
- zone
- assigning name P2R-101
- displaying P2R-173
- name format P2R-101
- special characters P2R-101
- Zone Information Protocol
- See ZIP
- appletalk access-group command P2R-21
- appletalk address command P2R-23
- appletalk alternate-addressing command P2R-24
- appletalk arp interval command P2R-25
- appletalk arp retransmit-count command P2R-27
- appletalk arp-timeout command P2R-29
- appletalk aurp tickle-time command P2R-30
- appletalk cable-range command P2R-32
- appletalk checksum command P2R-33
- appletalk client-mode command P2R-34
- appletalk discovery command P2R-35
- appletalk distribute-list in command P2R-37
- appletalk distribute-list out command P2R-39
- appletalk domain-group command P2R-41
- appletalk domain hop-reduction command P2R-43
- appletalk domain name command P2R-45
- appletalk domain remap-range command P2R-46
- appletalk eigrp active-time command P2R-48
- appletalk eigrp-bandwidth-percent command P2R-50
- appletalk eigrp log-neighbor-changes command P2R-51
- appletalk eigrp split-horizon command P2R-52
- appletalk eigrp-timers command P2R-53
- appletalk event-logging command P2R-55
- appletalk free-trade-zone command P2R-56
- appletalk getzonelist-filter command P2R-57
- appletalk glean-packets command P2R-59
- appletalk ignore-verify-errors command P2R-60
- appletalk iptalk-baseport command P2R-63
- appletalk iptalk command P2R-61
- appletalk lookup-type command P2R-65
- appletalk macip server command P2R-69
- appletalk macip static command P2R-71
- appletalk maximum-paths command P2R-73
- appletalk name-lookup interval command P2R-74
- appletalk permit-partial-zones command P2R-75
- appletalk pre-fdditalk command P2R-76
- appletalk protocol command P2R-77
- appletalk proxy-npb command P2R-79
- AppleTalk Remote Access
- See ARA
- appletalk require-route-zones command P2R-81
- appletalk route-cache command P2R-82
- appletalk route-redistribution command P2R-83
- appletalk routing command P2R-84
- appletalk rtmp jitter command P2R-86
- appletalk rtmp-stub command P2R-87
- appletalk send-rtmps command P2R-89
- appletalk static cable command P2R-92
- appletalk static cable-range P2R-90
- appletalk static cable-range command P2R-90
- appletalk static network command P2R-92
- appletalk strict-rtmp-checking command P2R-94
- appletalk timers command P2R-95
- AppleTalk Update Routing Protocol
- See AppleTalk, AURP
- appletalk virtual-net command P2R-97
- appletalk zip-reply-filter command P2R-100
- appletalk zone command P2R-101
- APPN
- activating and deactivating
- activation retries, specifying BR-644, BR-645
- limited resources BR-616, BR-617
- link, activating BR-575
- link, deactivating BR-578
- port, activating BR-576
- port, deactivating BR-579
- routing, activating BR-573
- routing, deactivating BR-577
- startup connection, specifying BR-589
- subsystem, activating BR-574
- ATM link, specifying BR-580
- BTU
- maximum receive size, specifying BR-626
- maximum send size, specifying BR-595
- buffers, specifying BR-586
- capacity, specifying BR-602, BR-603
- central resource registration feature, disabling BR-587
- class of service
- defining BR-588
- specifying BR-557
- control point, specifying BR-561
- cost per byte, specifying BR-590, BR-591
- cost per connection, specifying BR-592, BR-593
- CP-CP session, permitting BR-594
- database storage BR-650, BR-651, BR-652
- destination LU, specifying BR-567
- DLUR
- permitting function BR-596
- specifying node BR-596, BR-597
- DLUS
- backup default, specifying BR-582, BR-584
- node, specifying BR-598, BR-600
- DSPU
- specifying BR-641
- Frame Relay link
- specifying BR-605
- HPR
- hpr command
- APPN
control point BR-606
link station BR-607
port BR-608
- hpr-max-sessions command BR-609
- hpr retries command BR-610
- hpr sap command BR-611
- hpr timers liveness command BR-612
- hpr timers path-switch command BR-613
- show appn link-station command BR-674
- show appn node command BR-678
- show appn port command BR-680
- show appn rtp command BR-683
- show appn session command BR-685
- show appn topology command BR-687
- ISR, enabling BR-614
- link station
- active, specifying maximum BR-624
- inbound, specifying maximum BR-642
- name, specifying BR-563
- outbound, specifying maximum BR-643
- port, specifying BR-636
- role, specifying BR-646, BR-647
- memory usage, specifying
- buffers BR-586
- cached directory entries BR-621
- cached routing trees BR-622
- maximum available BR-623
- minimum available BR-627
- mode, specifying or changing BR-566
- monitoring
- class of service BR-659
- connection network BR-662
- dependent LUs BR-666
- dependent PUs BR-668
- directory entries BR-664
- LUs BR-670
- mode BR-677
- node BR-678
- ports BR-680
- SNA sessions BR-672, BR-685
- topology BR-687
- network name, specifying BR-559, BR-658
- node row, specifying BR-630
- partner node, specifying BR-556
- ATM link BR-580
- Ethernet link BR-615
- FDDI link BR-615
- Frame Relay link BR-605
- LU-LU session BR-567
- PPP link BR-637
- QLLC BR-705
- SDLC BR-653
- SMDS address BR-690
- Token Ring link BR-615
- ports, defining BR-570
- PPP link
- specifying BR-637
- QLLC
- link, specifying BR-705
- X.25 subaddress, configuring BR-706
- queuing priority, specifying BR-618
- route selection, determining
- bit rate, specifying BR-602, BR-603
- cost per byte BR-590, BR-591
- cost per connection BR-592, BR-593
- local node BR-648
- propagation delay BR-638, BR-639
- RSRB
- configuring BR-649
- port, defining BR-570
- RTP connection
- activating BR-569
- SAP (service access point), activating BR-619
- SDLC
- link, specifying BR-653
- secondary address, configuring BR-654
- security, specifying BR-655, BR-656
- transmission group, specifying BR-691, BR-692
- transmission priority, specifying BR-694
- virtual data link control
- configuring BR-701
- port, defining BR-570
- ring-group, specifying BR-701
- virtual MAC address option, specifying BR-701
- XID, specifying BR-707, BR-708
- appn class-of-service command BR-557
- appn connection-network command BR-559
- appn control-point command BR-561
- appn link-station command BR-563
- appn mode command BR-566
- appn partner-lu-location command BR-567
- appn path-switch command BR-569
- appn port command BR-570
- appn routing command BR-573
- appn start command BR-574
- appn start link-station command BR-575
- appn start port command BR-576
- appn stop command BR-577
- appn stop link-station command BR-578
- appn stop port command BR-579
- APS
- protect interface IR-14, IR-18
- aps authenticate command IR-6
- aps force command IR-7
- aps group command IR-9
- aps lockout command IR-11
- aps manual command IR-12
- aps protect command IR-14
- aps revert command IR-15
- aps timers command IR-16
- aps unidirectional command IR-17
- aps working command IR-18
- ARA
- access control DR-653, DR-654, DR-661
- clients, connecting to virtual terminal lines DR-511, DR-520, DR-529
- monitoring DR-662
- session, automatic startup DR-622
- arap authentication command DR-650, SR-28
- using list-names
- (caution) SR-28
- arap callback command DR-818
- arap dedicated command DR-650
- arap enable command DR-652
- arap net-access-list command DR-654
- arap noguest command DR-655
- arap timelimit command DR-657
- arap use-tacacs command DR-658
- line configuration commands
- arap use-tacacs SR-105
- single-line option
- (caution) SR-105
- arap warningtime command DR-660
- arap zonelist command DR-661
- area-address command P2R-219
- area authentication command P1R-228
- area default-cost command P1R-230
- area nssa command P1R-232
- area-password command P1R-324
- area range command P1R-233
- area stub command P1R-235
- area virtual-link command P1R-237
- ARP
- displaying accounting information IR-264
- SMDS, enabling WR-262, WR-272, WR-274
- SMDS broadcast messages WR-276
- arp arpa command P1R-5
- ARP cache
- See ARP table
- arp command P1R-4, WR-262
- arp frame-relay command P1R-5
- arp probe command P1R-5
- ARP server
- (example) WR-8
- arp snap command P1R-5
- ARP table
- Apollo Domain P3R-11
- AppleTalk
- gleaning entries P2R-59
- update interval P2R-25, P2R-27, P2R-29
- LANE
- dynamic entries, clearing XR-129
- timeout P1R-7
- VINES P3R-62
- arp timeout command P1R-5, P1R-7
- ASCII
- activation character FR-46
- character
- widths FR-75, FR-96
- character set
- (table) FR-741
- disconnect character FR-52
- dispatch character FR-53, FR-81
- escape character FR-58, FR-84
- hold character FR-62, FR-87
- padding FR-69, FR-92
- start character FR-98
- stop character DR-66, FR-100
- asp addr-offset command BR-302
- asp role command BR-304
- asp rx-ift command BR-305
- asterisk character in regular expressions DR-912
- asychronous mobility DR-628
- async-bootp command DR-4, FR-322
- async default ip address command
- See peer default ip address command
- async default routing command DR-7
- async dynamic address command DR-8
- async dynamic routing command DR-9
- asynchronous
- interfaces
- group ranges DR-17
- members DR-24
- mobility DR-487
- asynchronous interface, routing on, configuring manually DR-9
- asynchronous interfaces
- compression
- ignore-pfc option for async drivers DR-578, IR-60
- MPPC DR-578
- group
- effect of peer neighbor routes DR-591
- groups, designating IR-123
- Asynchronous Transfer Mode-Data Exchange Interface
- See ATM-DXI
- async mode dedicated command DR-620
- async mode interactive command DR-621
- ATG
- DECnet, configuring P3R-136
- ATM
- ABR
- rate-factor (example) WR-5
- address
- NSAP (example) WR-30
- addresses
- multicast (example) WR-26
- address-registration
- (example) WR-6
- configuration WR-6
- AIP filter register
- (example) WR-44
- configuring WR-44
- APPN partner node, specifying BR-580
- ARP server
- (example) WR-8
- channels
- maximum, configuring (example) WR-22
- Cisco 4500 Series
- loopback for OS3, DS3, E3 interfaces WR-80
- commands WR-1
- DS3
- framing (example) WR-17
- scrambling (example) WR-11
- E.164 addresses
- (example) WR-40
- configuring WR-40
- E.164 auto conversion
- (example) WR-12
- E3
- framing (example) WR-18
- E3-scramble
- (example) WR-13
- ESI address
- (example) WR-14
- exception queue
- length (example) WR-16
- framing
- DS3 (example) WR-17
- E3 (example) WR-18
- ILMI
- keepalives (example) WR-19
- ilmi
- PVC discovery (example) WR-20
- interfaces
- (example) WR-78
- displaying WR-100
- keepalive timer (example) WR-149
- LBO
- (example) WR-21
- line build-out
- (example) WR-21
- LIS WR-9
- loopback (example) WR-80
- loopback mode
- Cisco 4500 Series, OC3, DS3, E3 interfaces WR-80
- maximum number of VCs, configuring WR-24
- MID
- per VC (example) WR-25
- multicast addresses
- (example) WR-26
- multipoint intervals
- configuring (example) WR-27
- NSAP address WR-29
- (example) WR-30
- OAM
- cell flush (example) WR-31
- permanent rate queues
- (example) WR-35
- configuring WR-34
- point-to-multipoint SVC P1R-631
- poll timer (example) WR-151
- protocol addresses, mapping (example) WR-66
- PVC
- discovery (example) WR-20
- raw queue size
- (example) WR-36
- configuring WR-36
- receive buffers
- configuring WR-37
- receive buffers (example) WR-37
- scrambling
- DS3 (example) WR-11
- signaling
- point-to-multipoint (example) WR-28
- SMDS WR-40
- AAL3/4 encapsulations WR-26
- broadcast addresses WR-26
- multicast addresses WR-26
- multicast addresses, configuring (example) WR-26
- SONET PLIM IR-19
- (example) WR-41
- configuring WR-41
- speed WR-34
- SSCOP WR-146
- SSCOP connection control timer (example) WR-148
- SSCOP receiver window
- (example) WR-152
- SSCOP retry count (example) WR-150
- SSCOP transmitter window (example) WR-153
- static maps
- displaying WR-103
- SVC
- disabling WR-38
- disabling (example) WR-38
- point-to-multipoint P1R-631
- traffic information, displaying WR-118, WR-117
- traffic shaping, strict
- (example) WR-39
- enabling WR-39
- transmit buffers
- (example) WR-41
- configuring WR-41
- transmit clock
- enabling (example) WR-10
- unicast addresses WR-40
- UNI version
- (example) WR-42
- configuring WR-42
- vc-per-vp (example) WR-43
- VC status, displaying P1R-681
- virtual circuits
- maximum, configuring (example) WR-24
- atm aal aal3/4 command WR-4
- atm abr rate-factor command WR-5
- atm-address command XR-186
- atm address-registration command WR-6
- atm arp-server command WR-7
- atm classic-ip-extensions command WR-9
- atm clock internal command WR-10
- atm compression command VR-9
- ATM-DXI IR-80
- protocols supported for maps WR-66
- requires ADSU WR-66
- atm-dest-address command BR-580
- atm ds3-scramble command WR-11
- ATM-DXI
- AAL encapsulations WR-68
- ATM-DXI encapsulations
- (example) WR-69, WR-72
- atm e164 auto-conversion command WR-12
- atm e164 auto-conversion example WR-12
- atm e3-scramble command WR-13
- atm esi-address command WR-14
- atm exception-queue command WR-16
- atm framing (DS3) command WR-17
- atm framing (E3) command WR-18
- atm ilmi-keepalive command WR-19
- atm ilmi-pvc-discovery command WR-20
- atm lbo command WR-21
- atm max-channels command WR-22
- atm maxvc command WR-24
- atm mid-per-vc command WR-25
- atm multicast command WR-26
- atm multipoint-interval command WR-27
- atm multipoint-signalling command WR-28
- atm nsap-address command WR-29
- atm oam flush command
