Catalyst 5000 Family Software Configuration Guide (6.1)

• Index

• Preface

• Product Overview

• Using the Command-Line Interface

• Configuring the Switch IP Address and Default Gateway

• Using Redundant Supervisor Engines

• Configuring Ethernet and Fast Ethernet Switching

• Configuring Gigabit Ethernet Switching

• Configuring Fast EtherChannel and Gigabit EtherChannel

• Configuring Spanning Tree

• Configuring Spanning-Tree PortFast, UplinkFast, and BackboneFast

• Configuring VTP

• Configuring VLANs

• Configuring VLAN Trunks on Fast Ethernet and Gigabit Ethernet Ports

• Configuring Dynamic Port VLAN Membership with VMPS

• Configuring GVRP

• Configuring Quality of Service

• Configuring Multicast Services

• Configuring Broadcast/Multicast Suppression

• Configuring Port Security

• Configuring the IP Permit List

• Configuring Protocol Filtering

• Checking Port Status and Connectivity

• Configuring CDP

• Using Switch TopN Reports

• Configuring UDLD

• Configuring SNMP

• Configuring RMON

• Configuring SPAN

• Configuring the Network Analysis Module

• Administering the Switch

• Switch Access: Using Authentication, Authorization, and Accounting

• Modifying the Switch Boot Configuration

• Using the Flash File System

• Working with System Software Images

• Working with Configuration Files

• Configuring System Message Logging

• Configuring DNS

• Configuring NTP

• Configuring FDDI/CDDI Switching

• Configuring FDDI 802.10 Trunks

• Configuring Token Ring Switching

• Configuring Token Ring Filters

• Acronyms