Repacking a Switch

To repack the switch using the original packaging material, follow these steps:

Step 1 Slide the pieces of the packing foam over the Catalyst 4000 family switch. (See Figure B-1.)

Note The Catalyst 4003 switch is shown in Figure B-1. The repackaging procedure for other Catalyst 4000 family switches is identical.

Step 2 Place the documentation and accessory kit in the box or poly bag provided.

Step 3 Place the box or poly bag containing the documentation and accessory kit on top of the packing material.

Step 4 Place the switch (with packing foam pieces) into the packing carton.

Step 5 Fold in the top flaps of the packing carton and seal with packing tape.

Figure B-1: Catalyst 4000 Family Switch Packing Material

Table of Contents