Specifications

This appendix provides cable and technical specifications for Catalyst 4000 family switches.

Supervisor Engine Ethernet Management Port

The Catalyst 4003 switch has a 10BASE-T Ethernet management port. The Catalyst 4006 switch has a 10/100BASE-T Ethernet management port. Both the Catalyst 4003 and 4006 Ethernet management ports have DTE RJ-45 receptacles and a STATUS LED. Table A-1 lists the Ethernet management port pinouts for the Catalyst 4003 and 4006 switches.

Table A-1: Catalyst 4003 and 4006 Supervisor Engine Management Port Pinouts

Pin Signal Direction Description

1

RXDP

input

receive data

2

RXDN

input

receive data

3

TXDP

output

transmit data

4

unused

5

unused

6

TXDN

output

transmit data

7

unused

8

unused

Pin	Signal	Direction	Description
1	RXDP	input	receive data
2	RXDN	input	receive data
3	TXDP	output	transmit data
4	unused
5	unused
6	TXDN	output	transmit data
7	unused
8	unused

Catalyst 4003 Supervisor Engine Console Port

The console port of the Catalyst 4003 supervisor engine uses a DB-25 connector and supports DTR, DSR, CTS, and RTS handshake signals. Table A-2 lists the Catalyst 4003 switch console port pinouts.

Table A-2: Catalyst 4003 Console Port Pinouts

Pin Signal Direction Description

1

Ground

2

RXD

input

receive data

3

TXD

output

transmit data

4

CTS

input

clear to send

5

RTS

output

request to send

7

Ground

8

DTR

output

data terminal ready

20

DSR

input

data set ready

Pin	Signal	Direction	Description
1	Ground
2	RXD	input	receive data
3	TXD	output	transmit data
4	CTS	input	clear to send
5	RTS	output	request to send
7	Ground
8	DTR	output	data terminal ready
20	DSR	input	data set ready

Catalyst 4006 Supervisor Engine Console Port

The console port of the Catalyst 4006 supervisor engine uses an RJ-45 connector and supports DTR and DSR handshake signals. Table A-3 lists the Catalyst 4006 switch console port pinouts.

Table A-3: Catalyst 4006 Console Port Pinouts

Pin Signal Direction Description

1

RTS

output

request to send

2

DTR

output

data terminal ready

3

TXD

output

transmit data

4

Ground

5

Ground

6

RXD

input

receive data

7

DSR

input

data set ready

8

CTS

input

clear to send

Pin	Signal	Direction	Description
1	RTS	output	request to send
2	DTR	output	data terminal ready
3	TXD	output	transmit data
4	Ground
5	Ground
6	RXD	input	receive data
7	DSR	input	data set ready
8	CTS	input	clear to send

Catalyst 4003 Switch Specifications

Table A-4 lists the Catalyst 4003 switch specifications.

Table A-4: Catalyst 4003 Switch Specifications

Item Specification

Environmental

Temperature
ambient operating

32 to 104°F (0 to 40°C)

Temperature
ambient nonoperating and storage

-40 to 167°F (-40 to 75°C)

Humidity (RH), ambient (noncondensing), operating

10 to 90%

Humidity (RH), ambient (noncondensing), nonoperating and storage

5 to 95%

Altitude,
operating and nonoperating

-200 to 6500 ft. (-60 to 2000 m)

Switching Components

Backplane

12 Gbps full duplex

Microprocessor

Supervisor engine: 150 MHz R5000 RISC

Memory

Supervisor engine

SDRAM: 32 MB on board, 32 MB DIMM (1Mx4x72, 168-pin, 100 MHz, non-registered, 3.3V), 16 MB Flash, 512 KB NVRAM

Physical Characteristics

Dimensions (H x W x D)

10.50 x 17.25 x 11.81 in. (26.6 x 43.7 x 30 cm)

Weight

Minimum weight: 27.5 lb (12 kg)
Maximum weight: 40 lb (18 kg)

AC Power

Power supply output capacity

400W maximum

Power supply output current

+12V @ 33.3A (maximum)

AC-input voltage

100 to 240 VAC

AC frequency

50 to 60 Hz

AC-input current

6.0A maximum @ 100 VAC 60 Hz per power supply
3.0A maximum @ 240 VAC 50 Hz per power supply

KVA rating

0.58 KVA

Heat Dissipation

530W maximum (1800 BTUs per hour)

DC Power

Power supply output capacity

400W maximum

Power supply output current

+12V @ 33.3A (maximum) per power supply

DC-input voltage

-40.5 to -72 VDC per power supply

DC-input current

-40.5 to -72 VDC, 11 A per power supply

KVA rating

0.53 KVA

Heat dissipation

530W maximum (1800 BTUs per hour)

Input wiring

AWG 12 (recommended), AWG 10 (maximum)

Airflow

Switch

right to left

Power supply

front to back

Standards Compliance

Compliance
CE¹ Marking

Safety
UL² 1950, CSA³-C22.2 No. 950, EN⁴60950,
and IEC⁵ 950, TS001⁶, AS/NZS⁷ 3260

EMC⁸
FCC⁹ Part 15, Class A (CFR¹⁰ 47) (USA), ICES¹¹-003 Class A (Canada), EN55022 Class A (Europe), CISPR22¹² Class A (International), AS/NZS 3548 Class A (Australia), and VCCI¹³ Class A (Japan) with UTP¹⁴

EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI Class B (Japan) with FTP¹⁵ cables

¹CE = European Compliance
²UL = Underwriters Laboratory
³CSA = Canadian Standards Association
⁴EN = European Norm
⁵IEC = International Electrotechnical Commission
⁶TS = technical specifications
⁷AS/NZS = Australia Standards/New Zealand Standards
⁸EMC = electromagnetic compatibility
⁹FCC = Federal Communications Commission
¹⁰CFR = Code of Federal Regulations
¹¹ICES = Interference-Causing Equipment Standard
¹²CISPR = Comite International Special des Perturbation Radioelectriques
¹³VCCI = Voluntary Control Council for Information Technology Equipment
¹⁴UTP = unshielded twisted-pair
¹⁵FTP = foil twisted-pair

Item	Specification
Environmental
Temperature ambient operating	32 to 104°F (0 to 40°C)
Temperature ambient nonoperating and storage	-40 to 167°F (-40 to 75°C)
Humidity (RH), ambient (noncondensing), operating	10 to 90%
Humidity (RH), ambient (noncondensing), nonoperating and storage	5 to 95%
Altitude, operating and nonoperating	-200 to 6500 ft. (-60 to 2000 m)
Switching Components
Backplane	12 Gbps full duplex
Microprocessor	Supervisor engine: 150 MHz R5000 RISC
Memory
Supervisor engine	SDRAM: 32 MB on board, 32 MB DIMM (1Mx4x72, 168-pin, 100 MHz, non-registered, 3.3V), 16 MB Flash, 512 KB NVRAM
Physical Characteristics
Dimensions (H x W x D)	10.50 x 17.25 x 11.81 in. (26.6 x 43.7 x 30 cm)
Weight	Minimum weight: 27.5 lb (12 kg) Maximum weight: 40 lb (18 kg)
AC Power
Power supply output capacity	400W maximum
Power supply output current	+12V @ 33.3A (maximum)
AC-input voltage	100 to 240 VAC
AC frequency	50 to 60 Hz
AC-input current	6.0A maximum @ 100 VAC 60 Hz per power supply 3.0A maximum @ 240 VAC 50 Hz per power supply
KVA rating	0.58 KVA
Heat Dissipation	530W maximum (1800 BTUs per hour)
DC Power
Power supply output capacity	400W maximum
Power supply output current	+12V @ 33.3A (maximum) per power supply
DC-input voltage	-40.5 to -72 VDC per power supply
DC-input current	-40.5 to -72 VDC, 11 A per power supply
KVA rating	0.53 KVA
Heat dissipation	530W maximum (1800 BTUs per hour)
Input wiring	AWG 12 (recommended), AWG 10 (maximum)
Airflow
Switch	right to left
Power supply	front to back
Standards Compliance
Compliance	CE¹ Marking
Safety	UL² 1950, CSA³-C22.2 No. 950, EN⁴60950, and IEC⁵ 950, TS001⁶, AS/NZS⁷ 3260
EMC⁸	FCC⁹ Part 15, Class A (CFR¹⁰ 47) (USA), ICES¹¹-003 Class A (Canada), EN55022 Class A (Europe), CISPR22¹² Class A (International), AS/NZS 3548 Class A (Australia), and VCCI¹³ Class A (Japan) with UTP¹⁴ EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI Class B (Japan) with FTP¹⁵ cables

Catalyst 4006 Switch Specifications

Table A-5 lists the Catalyst 4006 switch specifications.

Table A-5: Catalyst 4006 Switch Specifications

Item Specification

Environmental

Temperature
ambient operating
ambient nonoperating and storage

32 to 104°F (0 to 40°C)
-40 to 167°F (-40 to 75°C)

Humidity (RH), ambient (noncondensing): operating
nonoperating and storage

10 to 90%
5 to 95%

Altitude:
operating
nonoperating

-500 to 6,500 ft. (-150 to 2000 m)
-1000 to 30,000 ft. (-300 to 9150 m)

Switching Components

Backplane

32 Gbps full duplex

Microprocessor

Supervisor engine: 150 MHz R5000 RISC

Memory

Supervisor engine

SDRAM: 64 MB DIMM (2Mx4x72, 168-pin, 100 MHz, non-registered, 3.3V), 16 MB Flash, 1 MB NVRAM

Physical Characteristics

Dimensions (H x W x D)

15.75 x 17.25 x 11.81 in. (40 x 43.7 x 30 cm)

Weight

Minimum weight: 31 lb (14.0 kg)
Maximum weight: 61 lb (27.7 kg)

AC Power

Power supply output capacity

400W maximum per power supply; 725W maximum with two power supplies

Power supply output current

+12V @ 33.3A (maximum) per power supply

AC-input voltage

100 to 240 VAC

AC frequency

50 to 60 Hz

AC-input current

6.0A maximum @ 100 VAC 60 Hz per power supply; 3.0A maximum @ 240 VAC 50 Hz per power supply

KVA rating

0.58 KVA

Heat Dissipation

725W maximum (3090 BTUs per hour)

DC Power

Power supply output capacity

400W maximum

Power supply output current

+12V @ 33.3A (maximum) per power supply

DC-input voltage

-40.5 to -72 VDC per power supply

DC-input current

-40.5 to -72 VDC, 11A per power supply

KVA rating

0.53 KVA

Heat dissipation

530W maximum (1800 BTUs per hour)

Input wiring

AWG 12 (recommended), AWG 10 (maximum)

Airflow

Switch

right to left

Power supply

front to back

Standards Compliance

Compliance
CE¹ Marking

Safety
UL² 1950, CSA³-C22.2 No. 950, EN⁴60950,
and IEC⁵ 950, TS001⁶, AS/NZS⁷ 3260

EMC⁸
FCC⁹ Part 15, Class A (CFR¹⁰ 47) (USA), ICES¹¹-003 Class A (Canada), EN55022 Class A (Europe), CISPR22¹² Class A (International), AS/NZS 3548 Class A (Australia), and VCCI¹³ Class A (Japan) with UTP¹⁴

EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI Class B (Japan) with FTP¹⁵ cables

¹CE = European Compliance
²UL = Underwriters Laboratory
³CSA = Canadian Standards Association
⁴EN = European Norm
⁵IEC = International Electrotechnical Commission
⁶TS = technical specifications
⁷AS/NZS = Australia Standards/New Zealand Standards
⁸EMC = electromagnetic compatibility
⁹FCC = Federal Communications Commission
¹⁰CFR = Code of Federal Regulations
¹¹ICES = Interference-Causing Equipment Standard
¹²CISPR = Comite International Special des Perturbation Radioelectriques
¹³VCCI = Voluntary Control Council for Information Technology Equipment
¹⁴UTP = unshielded twisted-pair
¹⁵FTP = foil twisted-pair

Item	Specification
Environmental
Temperature ambient operating ambient nonoperating and storage	32 to 104°F (0 to 40°C) -40 to 167°F (-40 to 75°C)
Humidity (RH), ambient (noncondensing): operating nonoperating and storage	10 to 90% 5 to 95%
Altitude: operating nonoperating	-500 to 6,500 ft. (-150 to 2000 m) -1000 to 30,000 ft. (-300 to 9150 m)
Switching Components
Backplane	32 Gbps full duplex
Microprocessor	Supervisor engine: 150 MHz R5000 RISC
Memory
Supervisor engine	SDRAM: 64 MB DIMM (2Mx4x72, 168-pin, 100 MHz, non-registered, 3.3V), 16 MB Flash, 1 MB NVRAM
Physical Characteristics
Dimensions (H x W x D)	15.75 x 17.25 x 11.81 in. (40 x 43.7 x 30 cm)
Weight	Minimum weight: 31 lb (14.0 kg) Maximum weight: 61 lb (27.7 kg)
AC Power
Power supply output capacity	400W maximum per power supply; 725W maximum with two power supplies
Power supply output current	+12V @ 33.3A (maximum) per power supply
AC-input voltage	100 to 240 VAC
AC frequency	50 to 60 Hz
AC-input current	6.0A maximum @ 100 VAC 60 Hz per power supply; 3.0A maximum @ 240 VAC 50 Hz per power supply
KVA rating	0.58 KVA
Heat Dissipation	725W maximum (3090 BTUs per hour)
DC Power
Power supply output capacity	400W maximum
Power supply output current	+12V @ 33.3A (maximum) per power supply
DC-input voltage	-40.5 to -72 VDC per power supply
DC-input current	-40.5 to -72 VDC, 11A per power supply
KVA rating	0.53 KVA
Heat dissipation	530W maximum (1800 BTUs per hour)
Input wiring	AWG 12 (recommended), AWG 10 (maximum)
Airflow
Switch	right to left
Power supply	front to back
Standards Compliance
Compliance	CE¹ Marking
Safety	UL² 1950, CSA³-C22.2 No. 950, EN⁴60950, and IEC⁵ 950, TS001⁶, AS/NZS⁷ 3260
EMC⁸	FCC⁹ Part 15, Class A (CFR¹⁰ 47) (USA), ICES¹¹-003 Class A (Canada), EN55022 Class A (Europe), CISPR22¹² Class A (International), AS/NZS 3548 Class A (Australia), and VCCI¹³ Class A (Japan) with UTP¹⁴ EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI Class B (Japan) with FTP¹⁵ cables

Switching Module Specifications

Table A-6 provides specifications for the Catalyst 4000 family switching modules.

Table A-6: Switching Module Specifications

Item Specification

Physical Characteristics

Dimensions (H x W x D)

1.75 x 14.4 x 10.5 in. (44 x 366 x 267 mm)

Weight

4.8 lb. (2.2 kg)

Environmental

Operating temperature

32 to 104ºF (0 to 40ºC)

Nonoperating temperature

-40 to 167ºF (-40 to 75ºC)

Humidity, noncondensing

10 to 90 %

Connectors

WS-X4124-FX-MT

24 ports; 24 MT-RJ connectors; MMF

WS-X4148-RJ

48 ports; 48 RJ-45 connectors; Category 5 UTP¹

WS-X4148-RJ21

48 ports; 4 RJ-21 connectors; Category 5 UTP

WS-X4232-GB-RJ

32 ports; 32 RJ-45 connectors; Category 5 UTP
2 ports; 2 GBICs, SC-type connectors; MMF or SMF

WS-X4232-L3

32 ports; 32 RJ-45 connectors; Category 5 UTP
2 ports; 2 GBICs, SC-type connectors; MMF or SMF; console and 10BASE-T port; 2 RJ-45 connectors; Category 5 UTP

WS-X4232-RJ-XX

32 ports; 32 RJ-45 connectors; Category 5 UTP, uplink module

WS-X4306-GB

6 ports; 6 GBICs, SC-type connectors; MMF or SMF

WS-X4412-2GB-T

12 ports; 12 RJ-45 connectors; Category 5 UTP
2 ports; 2 GBICs, SC-type connectors; MMF or SMF

WS-X4418-GB

18 ports; 18 GBICs, SC-type connectors; MMF or SMF

WS-X4148-RJ45V

48 ports; 48 RJ-45 connectors; Category 5 UTP

¹UTP = unshielded twisted-pair

Item	Specification
Physical Characteristics
Dimensions (H x W x D)	1.75 x 14.4 x 10.5 in. (44 x 366 x 267 mm)
Weight	4.8 lb. (2.2 kg)
Environmental
Operating temperature	32 to 104ºF (0 to 40ºC)
Nonoperating temperature	-40 to 167ºF (-40 to 75ºC)
Humidity, noncondensing	10 to 90 %
Connectors
WS-X4124-FX-MT	24 ports; 24 MT-RJ connectors; MMF
WS-X4148-RJ	48 ports; 48 RJ-45 connectors; Category 5 UTP¹
WS-X4148-RJ21	48 ports; 4 RJ-21 connectors; Category 5 UTP
WS-X4232-GB-RJ	32 ports; 32 RJ-45 connectors; Category 5 UTP 2 ports; 2 GBICs, SC-type connectors; MMF or SMF
WS-X4232-L3	32 ports; 32 RJ-45 connectors; Category 5 UTP 2 ports; 2 GBICs, SC-type connectors; MMF or SMF; console and 10BASE-T port; 2 RJ-45 connectors; Category 5 UTP
WS-X4232-RJ-XX	32 ports; 32 RJ-45 connectors; Category 5 UTP, uplink module
WS-X4306-GB	6 ports; 6 GBICs, SC-type connectors; MMF or SMF
WS-X4412-2GB-T	12 ports; 12 RJ-45 connectors; Category 5 UTP 2 ports; 2 GBICs, SC-type connectors; MMF or SMF
WS-X4418-GB	18 ports; 18 GBICs, SC-type connectors; MMF or SMF
WS-X4148-RJ45V	48 ports; 48 RJ-45 connectors; Category 5 UTP

Table of Contents

Specifications

Specifications

Supervisor Engine Ethernet Management Port

Catalyst 4003 Supervisor Engine Console Port

Catalyst 4006 Supervisor Engine Console Port

Catalyst 4003 Switch Specifications

Catalyst 4006 Switch Specifications

Switching Module Specifications