WIC-1DSU-56K4 Documentation Roadmap

Table Of Contents

WIC-1DSU-56K4 Documentation Roadmap

Product Information and Supported Hardware and Software

Regulatory Compliance and Safety Information

Hardware Installation

Interface Numbering

Software Configuration

WIC-1DSU-56K4 Documentation Roadmap

Updated 9/21/2004

This document provides links to resources for understanding, installing, and configuring the 4-wire 56/64-kbps channel service unit/data service unit (CSU/DSU) WAN interface card (WIC). Use this document in HTML format on Cisco.com.

Product:

WIC-1DSU-56K4

1-port 4-wire 56/64-kbps CSU/DSU WAN interface card

Note This is a platform-independent document. To see which routers support this product, refer to the document in the following section.

Product Information and Supported Hardware and Software

• Understanding the 1-Port 4-Wire 56/64 Kpbs CSU/DSU WAN Interface Card (WIC-1DSU-56K4) , tech note

Regulatory Compliance and Safety Information

• Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information

Hardware Installation

See the following chapters of the Cisco Interface Cards Hardware Installation Guide:

• Installing Cisco Interface Cards in Cisco Access Routers

• Connecting DSU/CSU WAN Interface Cards to a Network

Interface Numbering

•Overview in the hardware installation documentation for your router

Software Configuration

• Configuring Cisco Integrated Data Service Unit/Channel Service Unit (DSU/CSU) Modules and WAN Interface Cards , tech note

•" Configuring Serial Interfaces" chapter in the Cisco IOS Interface Configuration Guide, Release 12.2

• 56K CSU Support for the Cisco Signaling Link Terminal , Cisco IOS Release 12.2(2)T feature module

• Cisco Signaling Link Terminal , Cisco IOS Release 12.1(1)T feature module

Copyright © 2004 Cisco Systems, Inc. All rights reserved.