| Cisco
IOS Platform support help |
| |
800 Series |
|
801, 802, 803, 804
ISDN/IDSL Routers - use c800- images
805 Serial Router -
uses c805- images
806 Broadband Gateway Router - uses
c806- images that are available only in the 12.2XE release,
which is not covered by Cisco Feature Navigator.
826 and 827
DSL Routers - uses c820- images.
828 G.shdsl Router – uses
c828- images that are available only in the 12.2XE
release, which is not covered by Cisco Feature
Navigator.
top |
| |
1000 Series |
|
1003, 1004 ISDN Routers -
use c1000- images
1005 Serial Router - use c1005-
images
top
|
| |
1600 Series |
|
1601, 1602, 1603, 1604 run
from Flash Routers - use c1600-<abc>-l -
images
1601, 1602, 1603, 1604 and 1605 run from RAM Routers - use
c1600-<abc>-mz images
top
|
| |
1700 Series |
|
1720 data only
Routers - use c1700- images that are for data
only
1750 data+voice Routers - use any c1700- images,
including those that provide voice features.
Note,
data+voice images are identified by the presence of a "v" in the
image name, eg c1700-k2sv3y-mz. A data+voice image could be
loaded onto a 1720 Router, but the voice features will not
function.
top
|
| |
2500 Series
|
|
2501 to 2525 Routers - use
c2500- images
2500 FRADs - use c25FX- and
c2500-f- images
top
|
| |
MC 3810 |
|
MC3810
- uses mc3810- images, not 3800- images (which are for
the obsolete 3801, 3803 products)
top
|
| |
4500 Series |
|
4500,
4700, 4500-M and 4700-M Routers - use c4500-
images
top
|
| |
7000 Series |
|
7000
Routers (without RSP) - use c7000- images. For 7000 with RSP,
use same images as 7500
top
|
| |
7400 Series |
|
7400 Router images are
available only in the 12.1DX release, which are not covered by Cisco
Feature Navigator
top |
| |
7500 & 7000 RSP Series
|
|
7500 and 7000 (with RSP)
Routers - use rsp- images
top
|
| |
7600 OSR Series |
|
The 7600 uses the
Multilayer Switch Feature Card (MSFC) for Layer 3
switching.
Multilayer Switch Feature Card-1 MSFC1 - uses
c6msfc- images
Multilayer Switch Feature Card-2
MSFC2 - uses c6msfc2- images
top
|
| |
10000 Series |
|
The 10000 and 10700 are not currently displayed in Cisco Feature Navigator, but will use the c10k and c10700 images when available.
top
|
| |
12000 GSR Series |
|
12000 Series routers - use
gsr- images
top
|
| |
Catalyst 4000 |
|
Access Gateway Module - uses
c4gwy- images
top
|
| |
Catalyst 5000 |
|
Feature Navigator provides information
on the Cisco IOS for Routing cards that can be installed in the
Catalyst 5000, but not the CatOS features. For CatOS, see the
Compatibility Advisor at:
http://www.cisco.com/cgi-bin/Support/Advisor/advisor.cgi
Route
Switch Module - uses c5rsm- images
Route Switch
Feature Card - uses c5rsfc- images
top
|
| |
Catalyst 6000 & 6500 |
|
Feature Navigator provides information on
the IOS for Cat6x00 Supervisor and Routing cards that can be
installed in the Catalyst 6x00, but not the CatOS features
themselves. For CatOS, see the Compatibility Advisor at:
http://www.cisco.com/cgi-bin/Support/Advisor/advisor.cgi
Supervisor
I cards - use cat6000- (in 12.1(1)E only) images,
or c6sup- images (from 12.1(2)E)
Supervisor I
cards with MSFC1 - use c6sup11-
images
Supervisor I cards with MSFC2 - use
c6sup12- images
Supervisor II cards with MSFC2 -
use c6sup22- images
Multilayer Switch Feature
Card-1 MSFC1 - uses c6msfc- images
Multilayer
Switch Feature Card-2 MSFC2 - uses c6msfc2- images
<
top
|
| |
MGX 8800, 8230, and 8250 series
|
|
Route Processor Module (RPM) - uses
rpm- images
top
|
| |
ONS 15104 |
|
Optical regenerator - uses
regen- images
top
|
