Back Feedback 

Cisco Verification Kit (Verikit) Contents

A field engineer uses the modem, adaptors, and cables in this kit to enable a Cisco engineer to access the CLI of the console port of a customer's router. If the Cisco engineer cannot access the router, the field engineer uses the adaptors and cables to access the router via laptop.

Field engineers are responsible for advising their local field office to provide them with a modem if the Verikit does not include one.

List of Contents
Part # Description QTY
MODEM 160826 14.4 or 33.6 USR Modem (New Config.) 1
N/A 9.5v, 12w Power Supply 1
CABLES BBT-52I 50-Foot RJ-11 Phone Cable 1
72-0876-01 Black RJ-45 to RJ-45 Console Cable 1
72-0817-02 RJ-45 Straight-Through Cable 1
72-1169-01 RJ-45 Ethernet Crossover Cable 1
ADAPTORS 29-0808-01 RS-232 to RJ-45 MDCE Adaptor 2
29-0810-01 RS-232 to RJ-45 FDTE Adaptor 1
29-0881-01 RS-232 TO RJ-45 Modem Adaptor 2
74-0495-01 DB-9 to RJ-45 FDTE Adaptor 2
DB9-MMGC DB-9 Gender Changer 1
DB15-SL DB-15 Serial Loopback Connector,
Pins 1-3 and 9-11 Looped
1
LOOPBACK 997108 5 in 1 Serial Loopback Connector 1
CONNECTORS 99-7912-042-1 RJ-48C T-1 Loopback Connector 1
99-7912-043-1 RJ-48S 4W 56K Loopback Connector 1
99-7912-044-1 RJ-11 2W 56K Loopback Connector 1
996706 AUI-Ethernet Loopback Connector 1
AC07-003376 RJ-45 Ethernet Loopback Connector 1
CASE, TOOLS C1113 Black Case with Molded Foam Inside 1
Card-Lam Laminated Instruction Sheet 1
47-0001-01 Inspection Slip or Sticker; Dated, Signed 1
  5-32AW 5/32 Allen Wrench 1

All contents are Copyright 1992--2004 Cisco Systems, Inc. All rights reserved.