The results of the system tests performed for contact center during Cisco Unified Communications Release 5.0 are shown in the System Test Results 
.
The test results contain the following information:
•
Title—Title of the test.
•ID—Identifier for the test.
•Description—Description of the purpose of the test.
•Features Tested—Component feature tested.
•Status—Result of the test and any defects related to the test case. Possible values are:
–Passed—Test case passed as described in the table.
–Failed—Test case failed and the reason is described in the listed defect.
–Passed with exception—Test case as described passed but an anomaly occurred that was not directly related to the functionality being tested. Possible anomalies are as follows:
The test steps were modified based on the actual feature implementation.
The test setup was modified based on the actual feature implementation.
The test results did not exactly match what was expected although the feature performed as required.
•Defects—Identifier for any defect that was opened against the test. If you have an account with Cisco.com, you can use the Bug Toolkit to view information about defects.
To access the Bug Toolkit, perform either of these actions:
–Go to this URL: http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl 
–Log in to Cisco.com. From Technical Support & Documentation, click Tools & Resources, and then click Bug Toolkit.