Complete the following tasks before you begin installing or configuring Cisco BLISS for Cable.
Read Site Preparation and Network Communications Requirements 
for the Cisco BTS 10200. Verify that you have met all of the requirements listed in the document.
Note 
The Cisco BTS 10200 Softswitch User Documentation is password protected. See your Cisco representative for access information.
Complete the Cisco BTS 10200 Softswitch Building Environment and Power Site Survey . Verify that your site meets the requirements listed in the survey.
Complete the Network Site Survey For Software Installation for the Cisco BTS 10200 Softswitch. The survey is used to collect information required by the Cisco BTS 10200 Softswitch application software to communicate with the service provider network. Your Cisco representative will use the information that you provide in this survey to create a customized Network Information Data Sheet (NIDS), which contains information used during the installation of the application software.