Configure the Cisco BTS 10200.

Configuring the Cisco BTS 10200 consists of provisioning a series of data tables on the Call Agent and Feature Servers. A complete Cisco BTS 10200 implementation is very complex and will vary by customer.

More detailed information about the Cisco BTS 10200 data tables and fields can be found in the Cisco BTS 10200 Command Line Interface Reference Guide .

An overview of PacketCable™ specific features can be found in the Cisco BTS 10200 Softswitch PacketCable™ and Event Message Provisioning and Operations Guide.

Note The Cisco BTS 10200 Softswitch user documentation is password protected. See your Cisco representative for access information.

Configure the Cisco IP Transfer Point (ITP).

The Cisco IP Transfer Point (ITP) in IOS Software Release 12.2(25)SW3 document provides configuration tasks and procedures.

Configure the cable modem termination system (CMTS).

Select from the following guides, depending on the CMTS component you are using:

•Cisco uBR7200 Series Software Configuration Guide

•Cisco uBR10012 Universal Broadband Router Software Configuration Guide

In addition, the Cisco CMTS Feature Guide provides information about specific features.

The Cisco Broadband Cable Command Reference Guide contains the cable-specific commands for the Cisco uBR7100 series, Cisco uBR7200 series, and Cisco uBR10012 universal broadband routers.

The CMTS Configuration FAQ provides answers to frequently-asked questions about configuring CMTS.

Configure the Cisco MGX components.

The Cisco MGX 8850 (PXM1E/PXM45), MGX 8950, MGX 8830, and MGX 8880 Configuration Guide, Release 5, provides instructions for configuring the MGX 8880 and MGX 8850.

The Cisco MGX 8850 (PXM1E/PXM45), MGX 8950, MGX 8830, and MGX 8880 Command Reference, Release 5, provides a detailed description of the PXM commands required for configuration at the shelf and PXM card level.

The Voice Switch Services (VXSM) Configuration and Command Reference Guide, Release 5, provides instructions for configuring the VXSM.

The Cisco Voice Interworking Services (VISM) Configuration Guide & Command Reference, Release 3.3, provides instructions for configuring the VISM.

In particular, see Configuration for VoIP Switching Applications for configuring VoIP switching applications on a Cisco MGX 8850 or MGX 8880 equipped with VXSMs.

Configure the embedded multimedia terminal adapter (eMTA).

Although there are standard PacketCable™ parameters defined for MTAs, the actual configuration is vendor-specific. For specific configuration procedures, see the appropriate vendor documentation

Configure Broadband Access Center for Cable (BACC).

The BACC Administrator's Guide for Release 2.6 provides BACC configuration checklists and task information for the following:

•Configuring BACC

•Configuring and using the sample user interface

•BACC support tools and advanced concepts

•Device provisioning engine CLI

Configure Cisco SIP devices.

The Cisco BTS 10200 SIP Provisioning Guide provides instructions for configuring SIP devices.