The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
The model is Nexus7000, version 6.1 (2), with sla responder and sla sender enabled, but there is no icmp echo in the sla process. What is the reason? If the device cannot support it, what other ways can it achieve the same function?型号是Nexus7000,版本是6....
Recently, my system bought around 800 of the Lenovo Gen 4 Chromebooks. We already had around 2500 Gen 3 100e's that worked perfectly fine, still do. We divided the new laptops out to the locations, and 2 of the 10 locations are having issues where th...
Hi, I want to clear some dynamic mac-addresses from a particular interface, and will settle for clearing all dynamic mac addresses, but my switch won't let me. We have a WS-C3750G-24TS running v12.2, and although it accepts the clear commands, it doe...
upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is...
Hello,I want to set up a IPSec IKEv2 VPN to a central ASA. On my side we have a cisco 897.First I tried a crypto map configuration. Didn't work because the IKEv2 SA goes UP and immediately goes DOWN with the error message "IKEv2:(SESSION ID = 1,SA ID...
Hello,I was wondering, whether it is possible instead of creating three separate tasks, one processing one element of an array, to actually loop through an array. Example: vars: ansible_become_pass: "{{ vault_sudo_password }}" ansible_pyt...
DNA service is active, but I do not have access to the web portal. support me with the troubleshooting documentation and if there is a way to restart the http process.
Hello All,I cannot get C9130AXI-B Access Point to get IP addresses from DHCP Server.ConfigurationDHCP Server (dhcpserver.de) is on Win 11, connected to Cisco Catalyst C1200-8FP-2G PoE switchC9130AXI-B running EWC image v17.12.03 connected to the same...
Hi, I´m trying to enable intervlan routing between vlan 902 and vlan 903. I'm not sure that If the switch has the network-essentials license I can achieve this. I tried using "ip routing" command to enable ip routing but every time I try this I get t...
Hello,Is it possible to retrieve the hostname of the client workstation via syslog messages?I activated syslog DAP, but I do not see the hostname of the workstation.For organizational reasons, I do not want to do it via AAA.Thanks a lot
I'm setting up a network (see image) and the issue I'm having is that I can see the redistributed routes in the routing table of R1 and R5, but I can't ping to them. When I try to ping 2.2.20.2 (R2) from R5 it's doesn't work, I can ping from R4. Sa...
Hello!We are currently using a voice translation rule to reject calls from specific numbers at the CUBE level (see attached screenshot), but we have reached the maximum (100) and I haven't been able to stack multiple voice translation rules on the in...
Hello! I am a student at college and i need some help with setup RIP.It is necessary that the network of the entire project be 197.10.19.0/24.Since I was constantly experiencing overlap when using it, I changed the subnet mask to 28.No matter how muc...
the router looks fine and show ip bgp is correctR2 can't reach ISP by going to R1 to ISP*******************************************************************************************************R1no license smart enable!!spanning-tree extend system-id!i...
Hello, I want to configure 802.1x authentication on an SSID on a 9800-CL hosted in Azure. I have configured the radius server, server group and method list and set this in the AAA section of the WLAN. In Wireshark I can see Access-Request coming from...