Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
SIG Policy unexpected behavior
by jjpark -
Error opening tftp server
by mohamadrezaporhosein613 -
IPsec tunnel using private ip
by Vishal6 -
CCW needed or not In case of license renew of cisco ironport (ESA)
by King_1988 -
vManage unable to talk to devices after poweron
by bmcgahan -
PCE between IGP domains failing
by steven.crutchley -
Plan d'adressage sur 2 switchs
by walimoha -
Remote location core switch
by saranghrn75
Community Activity
FTD Routing question
Hi to all,i am facing the following problem, please refer also to the png attached (i also have some information on the png attached).An IPsec VPN 2811 router tries to establish an IPSec vpn with an FTD. I have setup this config on the lab and i noti...
IPsec tunnel using private ip
Hi All, Can we create an ipsec tunnel between umbrella data center and Cisco FTD firewall using private ip ?. In my infrastructure isp is terminated on router and FTD is behind Router.
Resolved! Creating a S2S VPN - protected networks via IP extended ACL
Hi to all,i was trying to find why the the vpn between an FTD and a cisco router could not come up and concluded to this:When i create the S2S VPN PtP topology if i just add the protected networks, the tunnel does not come up.For example if behind th...
Secondary WLC over the internet for APs operating on Local Mode
Dear Gents, What are the recommendations that should be followed if we have a local site with wireless APs operating in Local Mode and registering on a local Primary WLC on the same network. and in the case of Primary WLC failure, the APs w...
vManage unable to talk to devices after poweron
I'm running vManage 20.9.4.1 in EVE-NG, and every time I power-on my virtual topology, the vManage doesn't work after it boots.DTLS tunnels do form from vManage to the vSmart/vBond and Edge Routers, but vManage can't actually send any commands to the...
CCW needed or not In case of license renew of cisco ironport (ESA)
Hi,If we want to renew license of cisco ESA, CCW needed or not?
Resolved! Pinging through ASA from Outside
Hi everyone,I have this basic scenario:(LAN) --------- (ASA) ---------- (DSL Router) ---------- (Internet)I am able to ping the DSL Router from the LAN but not vice versa. Is it a common case with the ASA deployed in between or am I missing something...
AP Wi-Fi AIR-CAP3702I-R-K9, AIR-CAP3602I-R-K9
Hello everyone.Please tell me about two AP Wi-Fi AIR-CAP3702I-R-K9, AIR-CAP3602I-R-K9.I can't find information, how many users can work on Wi-Fi AP data without problems?At the moment, I had a maximum of 36 users connected to the AIR-CAP3602I-R-K9 an...
WLC - mDNS Bridging Between Wired LANs
Does a WLC support bridging mDNS between wired LANs only? More accurately, will it respond with mDNS service provider info learnt from wired LANs to mDNS queries coming from wired devices in other LANs? I had assumed so, but debugging today I'm seein...
PCE between IGP domains failing
I can't seem to get an SR policy working between IGP domains using a PCE controller to guide the traffic. My topology is as follows (full configs attached): R1, R2 and PCE are in one ISIS domain. ISIS level-2 point-to-point is running and exchanging...
Error DTLS between wlc5508 and AP 3802
8.8:2802 AP console "DTLS disconnect: ERROR shutting down DTLS connection ..."CSCvj27233 i have this problem on my AIR-AP3802i-H-k9 when i want to connect it with my "5508" WLC
Select Clients Dropping Wireless Connection On 5500 WLC
Recently, my system bought around 800 of the Lenovo Gen 4 Chromebooks. We already had around 2500 Gen 3 100e's that worked perfectly fine, still do. We divided the new laptops out to the locations, and 2 of the 10 locations are having issues where th...
Plan d'adressage sur 2 switchs
Bonjour tout le monde, pourriez vous svp m'expliquer étant débutant ce que vous comprenez par ce qui suit : sur P.tracerimplémenter 3 réseaux optimisés en /24 obligatoirement sur un seul commutateur qui est relié à un autre commutateur et ce dernier ...
Remote location core switch
We have several remote locations with their own L3 switch that we use for routing. Some have direct fiber to our central core others uplink via another router and use VPN to tunnel back to our central office firewall.Edge switches at these locations ...
Configuring IP Helper-Address to issue IP address from DHCP Server
IP Helper-addres for VLANsThis is simple solution to reduce a bottle neck of router which is issuing ip address to clients using IP DHCP pool "Vlanxx". IP Helper-Address command can point to enterprize DHCP Server instead to issues ip address to thei...
