Cisco Community

iPads continually drop from wireless.

I work for a large company. We have many iPads used for scheduling zoom room meetings and they are all on the same SSID at all locations. These iPads will go through a stretch of having a solid connection then all of the sudden many office will start...

Does cisco announces VG320 and VG310 eol?

We recently got several VG320 and VG310 and just deployed but I see the link these hardware are expired.End-of-Sale and End-of-Life Announcement for the Cisco Voice Gateway VG320-EM and VG310-EMAre VG320-EM and VG320 are the same hardware and already...

Resolved! CIMC Certificate Issue

Greetings,I have just noticed that certificate of CIMC has expired. I logged as admin but could not able to see some options as described in documentations. Product Name: UCS C240 M4SX any possibility to see which certificate has expired?Documentatio...

Configuración de apagado y encendido router cisco

Buenas tardes equipos paso por aca si me pueden echar una manito. Se requiere realizar un apagado automático y encendido de un Router cisco1941/k9 a las 5:30 de la tarde y encenderlo a las 7 del día siguiente.Como seria la configuración por CLI. Tks

SNTC APIs

Trying to figure out what I have missed. I have SNTC API developer access in the SNTC portal, but the APIs don't appear in the API console (apiconsole.cisco.com). Anyone seen this before?

CDP Mismatch from CDP: Why?

Switch A, Cisco 9300, VTP mode transparentinterface GigabitEthernet1/0/5switchport access vlan 3switchport mode accessSwitch B, Cisco 3560, VTP mode transparentinterface GigabitEthernet1/0/1switchport access vlan 3switchport mode accessVlan 3 (L2) vl...

NAD config for 802.1x/MAB with ISE

Hello, I have seen in several places this commands as best practice. Are they still needed/helpful ? -epm logging-logging host <ISE_IP_address_x> transport udp port 20514-epm access-control open or access-session acl default passthrough -device class...

Resolved! Need to delete/remove a BOT.

Someone within my organization created a BOT with the same name as a user and it is causing confusion as when you look up the user it looks like they are in the directory twice. I have double checked the end user and made sure they didn't create the ...

internet speed slow from router to core switch

Hi we have cisco 2921 router connected to core sw and internet from the ISP, the issue is that the internet from the core sw is about 150kb while from the router is 10mb.after a lot of testing, I disconnected the router and connected another similar ...

Allow ISE captive portal DNS entry on outside DNS.

Hello,We are having ISE for EAP/TACACS authentication and, hosted internally in our datacenter.Now we have configured BYOD captive portal that tied to AZURE SAML authentication, the current captive portal redirect URL from ISE has prepended the node ...

1921 Router Config Help

Hello, I know very little about configuring cisco hardware and need some help..... we are currently running an 1800 router and I obtained a new to me 1921 router and would like to replace the 1800 router with the newer one, I managed to get it factor...

API call to get agent status

Hi, i am trying to get the Finesse agent status from asp.net using javascript but all i get is server responded with a status of 415 (Unsupported Media Type).what i got so far var agentID = "user"; var finesseEndpoint = "http://mydomain.com:8082/fine...

Cisco Archive config - any changes / Cisco commands

Hello Professionals,I have configured Archive to log config whenever type write memory.I would like to use this auto backup in other way too.Could anyone tell me how to configure followings?1. Is there possible to backup config whenever I make any ch...

Problem with SNTC account in Collector

Hello, when we try to access to "Software Updates -> Server connection setup" and we put the credentials that page freezes and does nothing.Also, the upload of files fails.We just updated to the version 2.11.Regards.

Resolved! No answer ring issue

CUCM 12.5, I have a Line Group with 3 users, top down then hunt pilot to VM. The RNA Reversion Timeout is set to 15 (per Cisco). One of my users (the first in the line group) sent me a message saying that incoming calls ring to her phone about 10 t...

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

Introducing Our New Gamification Ranking Naming

Community Activity

iPads continually drop from wireless.