The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hi,how to manually enable the R flag (R-bit) in ipv6 config, let us say in a cisco csr1000v?I have this documentation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/command/ipv6-cr-book/ipv6-i3.html#wp1103499300but unfortunately I could only ...
Greetings, I'm a bit confused regarding the encapsulation process of an ethernet 2 frame. It seems the destination IP address is obtained prior to data even reaching Layer 3 of the OSI model. Furthermore, in layer 4, to my understanding a virtual cir...
Hi allwe have implemented some trunks from out CUCM to a CUBE then to webex.we can call the extension from the cucm on webex and it works fine.we translate the source of the call and prefix it with 8801, so webex sees the 8801 plus the extension as t...
when i try to login cucm i accept this error : Description: http.500 RuntimeException java.lang.NullPointerException Root Cause: NullPointerException i the DEGUG logs of saml i see only one error with out specific details : 2024-05-06 17:22:...
Hi. I wanted to toss this out there to see if anyone else encountered this in the last week or so.This morning, I opened up the console to 40% of my endpoints indicating a compromise. I opened one computer to start investigating. I found it to be a r...
I am working on a pop-up link for an email channel, when an email comes in, I would like to pass the Subject line of the email to the "TaskRouted" flow where I could use the Subject line content to pop-up a web link. Please Help.
Hello,I have cucm running under vmware using cisco ucsc-c240-m4s2.Current cucm version is 11 and nowi want to upgrade to version 12.When i try to order smartnet for ucsc-c240-m4s2 our distributor say this box already eol and eos. So here i need advic...
Hi, I recently purchased a new 8861 3pcc K9. It is asking for an activation code. I purchased this phone for my small business and I'm the only user. I can NOT figure out how to find this code or get past this. Thanks in advance for your help.
Team,Currently we do not have an ACl on our outside interface. If apply the following ACL will it only block the deny ICMP statements?Extended IP access list DENY_ICMP10 deny icmp any any timestamp-request20 deny icmp any any timestamp-reply30 permit...
HejI have performed a local install, but I can not login to the GUI using admin/admin.I can login to CLI with "ncs_cli -C -u admin" , but when I do "show run", all I see is snmp configuration on the device. I can not see AAA or configure it.cisco@Ubu...
Hello Bros'I have a question regarding Cisco UCS system with specs as mentioned below:UCS manager 3.1(3b)Chassis 5108Ucs FI 6248upIO module 2208xpDue to creticality I wanted to consult you regarding changing the IP addressing used in the management a...
In a setup of two nodes, I pointed our WLC to just to the ISE2 node.Still I see in the RADIUS live logs of ISE1 (!) some processed requests, with Access-Accept/Access-Reject based on conditions.Expanding one of the logs, I eventually I realized that...
Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...