The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hi community, I'm trying to collect DHCP packets from a Nexus 5500 and the problem I have is that the capture is interrupted randomly, so I nbeed to keep looking at the console to re-run it again, and some times it takes me some tries to get it worki...
hi all,Thanks for your reply!physical topology is very simple: core switch stack (2x WS-C6506-E) connects to access switch via port-channel, no more redundant link. I see lots of topology change logged from core switch, for example:Number of topology...
Hi All,Please, i have a SMB network installation for a small enterprise of 15-20 users, and i am planning to use Catalyst 1000 Series Switch and Cisco 900 Series Integrated Services Router.Please is this a good devices? if not suggest for me others.T...
Recently, my system bought around 800 of the Lenovo Gen 4 Chromebooks. We already had around 2500 Gen 3 100e's that worked perfectly fine, still do. We divided the new laptops out to the locations, and 2 of the 10 locations are having issues where th...
Hi All, My question is very simple... after the EOL of the wireless systems based on AireOS software (WLC 5508 & 5520) is there a minimum inter-operability release between these old systems and the new FireOS (WLC 9800 series)? I need to guarantee se...
NSO 5.7From our recent HA operation, we are seeing 2 different be-slave-result. Would like to know what's the different between them. Thanks!high-availability status be-slave-result initializedhigh-availability status be-slave-result connected
Hello, I am looking at deploying a cisco ISR router at another site, connected to a T1 line with a toll free number associated. Is it possible to use an existing PUB/SUB/IMP/UNITY environment to manage and route calls for this? Diagram below is what ...
Meet Balaji Bandi, our Cisco Designated VIP 2024 and new member of Cisco Community Hall of Fame. Balaji Bandi Seasoned IT professional with 20+ years in the industry, holding diplomas in Electronics, Telecommunications, and IT Engineering. Expert in...
An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode. I got this message while I'm configring etherchannel, in specific it was in " interface port-channel 2"
Hi Everyone,I am need to transfer a file in DNAC and trying to used Winscp but unfortunately I am getting some error messages like Bash is recommended. I change the shell setting to Bash but still no luck. Can someone please kindly advice or give som...
I have a problem with migration of c3700 AP from WLC 8500 (8.2.170.0) to another 8500 (8.10.190.0). It joins the WLC, but it is stuck in downloading state. Can anyone tell me what is the reason and how to fix it? Here's the debug from WLC:*spamApTask...
Welcome to the new Cisco Community! Picture it: A simplified experience and step-by-step resources to guide you through your technology adoption. This experience welcomes new “how-to” guided resources to support you all the way from onboarding throug...
I am taking the self paced course for ECMS-1. However, the pre-recorded class requires us to follow along as the instructor add devices, etc. Where does a student go to get access to devices so we can follow the class?