The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
alk to someone on 헤atar 헔헶헿헹헶헻헲 smoothly, give their dedicated support line a ring at +[+ퟭ-ퟴퟲퟲ-ퟲퟲퟲ-ퟬퟮퟱퟳ] (헤atar-UK Line) +[ퟰퟰ-ퟴퟬퟬ-ퟬퟯퟭ-ퟰퟮퟰퟮ](US). Take your time and listen carefully to the automated prompts, then share all the required information to...
If I have Site A and Site B:Site A has Border switch that sending prefixes over eBGP peering and multiple eBGP peerings for separate VRFs to the Cisco Routers and that Cisco Router connected via dark fiber with Site B FW (lets say palo alto)What will...
alk to someone on 헤atar 헔헶헿헹헶헻헲 smoothly, give their dedicated support line a ring at +[+ퟭ-ퟴퟲퟲ-ퟲퟲퟲ-ퟬퟮퟱퟳ] (헤atar-UK Line) +[ퟰퟰ-ퟴퟬퟬ-ퟬퟯퟭ-ퟰퟮퟰퟮ](US). Take your time and listen carefully to the automated prompts, then share all the required information to...
Hello,I want to set up a IPSec IKEv2 VPN to a central ASA. On my side we have a cisco 897.First I tried a crypto map configuration. Didn't work because the IKEv2 SA goes UP and immediately goes DOWN with the error message "IKEv2:(SESSION ID = 1,SA ID...
Hi, I'm getting strange issues when I cannot bring up the tunnel between Cisco Router and Palo Alto FW,On Cisco router side I'm getting this on debug IKEv2:==================================================================*May 10 06:34:55.253: IPSEC:...
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)Router uptime is 1 minuteSystem returned to ROM by error - a Software forced crash, PC 0x30EEBBE8 at 06:3 9:57 UTC Wed May 8 2024System image file is "flash0:c2900-universalk9-mz.SPA.1...
Hello, When you use the Click-to-call feature on an Windows PC with Webex: for example use one of the commands below: tel:+31612345678 webextel:+31612345678 Build a Click-to-Call Shortcut Using Adaptive Cards in Webex | Webex Developers Blog You get ...
Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...
Hello,we have WLC controller in our main office and some APs in it connected to WLC.Also we have remote office with local DHCP server and some APs.Remote office is connected to main office by VPN tunnel and remote office APs are added to main office ...
Attempting to login on CSPC for a long time and my password got expired. The prompts says that I haven't specified the password reset questions and answers which is not true as this used to work before. My question is: can I reset my CSPC account fro...
Recently, my system bought around 800 of the Lenovo Gen 4 Chromebooks. We already had around 2500 Gen 3 100e's that worked perfectly fine, still do. We divided the new laptops out to the locations, and 2 of the 10 locations are having issues where th...
Hello All,I cannot get C9130AXI-B Access Point to get IP addresses from DHCP Server.ConfigurationDHCP Server (dhcpserver.de) is on Win 11, connected to Cisco Catalyst C1200-8FP-2G PoE switchC9130AXI-B running EWC image v17.12.03 connected to the same...
Dear All,I am planning to join a new Domain to my Cisco ISE enviroment.Now I already have a MS Domain Joined, and I use ISE to perform AAA, on the Devices and Users.I am using TEAP with EAP-TLS as inner method. It works well.But when I have added a n...
Hi,When i try to browse ESA with domain name it is not get connected. But when i put ip address then the ESA login page appeared and we can login. what can be the issue?
hi everyoneI have wlc and radiud set up. on the campus network. once the client connect to the wifi. the radius will classified group type of user, then assign them an vlan. this time wlc will receive device's mac and vlan id. my question is how the ...