Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
1934977members
1257317discussions

Trending Topics

Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!

Community Activity

Start a conversation

mDNS debugging Catalyst 9800-40 with IOS-XE 17.9

How is mDNS done correctly on Catalyst 9800 hardware platforms with IOS-XE 17.9.5. We have to troubleshoot Airprint devices that ware visible with mDNS bridging and not visible with mDNS gateway enabled. Other devices like Airplay are vsibble. From s...

Transport Gateway error

I running into an issue with Catalyst SD-WAN went trying to push a simple template to a devices. I keep getting the following error no matter what I adjust in the system template: [7-May-2024 21:50:51 UTC] Configuring device with feature template: c8...

ASA Micro BFD

Does anyone know if any cisco ASA version supports Micro-BFD (RFC 7130) ?I'm having a hard time finding it in the documentation so probably not.maybe in an upcoming release? 

Does cisco announces VG320 and VG310 eol?

We recently got several VG320 and VG310 and just deployed but I see the link these hardware are expired.End-of-Sale and End-of-Life Announcement for the Cisco Voice Gateway VG320-EM and VG310-EMAre VG320-EM and VG320 are the same hardware and already...

Connected device to switch not pingable from outside the switch

Hello Cisco community, i've got a weird problem. I have a server "A" connected to Gig2/0/16 as an access port (VLAN28) to my Catalyst C9300 switch (Two stacked switches). I can ping the device from within the switch. The switch has an SVI configured ...

rumak18 by • Level 1
  • 91 Views
  • 8 replies
  • 0 Helpful votes

Resolved! Simulate DoS Attack in CML

Hallo,Is there a way to simulate a DoS attack in CML? I am doing a lab on CoPP and an attack is required but I am unable to generate this. Thanks.

Joy3 by • Level 1
  • 161 Views
  • 5 replies
  • 0 Helpful votes

SXP between C9300 and C2960X

Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...

p11l by • Level 1
  • 336 Views
  • 17 replies
  • 0 Helpful votes

multicast routing on single cisco layer 3 switch

hi , we have only one Cisco layer3 switch (C3850) in our office ,and want to enable multicast routing between two vlan 2 & 3. How should configure pim on C3850? can use spare-mode or dense-spare-mode? Can anyone pls advise? thanks in advance!

IHQ constant packets in incoming queue

Good morning I am facing the following problem on a customer location with main and backup router. cisco ISR4331/K9 We see constant incoming IHQ packets on the WAN Interfaces on both routers. At the same time there is almost no traffic on the WAN Int...

Chrizhitz by • Level 1
  • 105 Views
  • 5 replies
  • 0 Helpful votes

DHCP connection timeout on Voice vlan- intermittent occurance

I've got this interment problem where my ip phones aren't able to get an IP address from DHCP. I've got a mix of 9200L and 2960s POE switches. I've experienced the issue on both models, with different version of firmware on each. Different DHCP serve...

athomas1 by • Level 1
  • 265 Views
  • 11 replies
  • 0 Helpful votes
Load more