The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
혼홢홚홧홞환홖홣 헔헶헿헹헶헻헲's phone number to call and talk with a live repr헲혀헲헻혁헮혁헶혃헲 fast is ퟏ-ퟖퟖퟖ✈ퟖퟐퟗ✈ퟭퟭퟰퟳ // ퟏ-ퟖퟖퟖ✈ퟖퟐퟗ✈ퟭퟭퟰퟳ . Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones that are...
혼홢홚홧홞환홖홣 헔헶헿헹헶헻헲's phone number to call and talk with a live repr헲혀헲헻혁헮혁헶혃헲 fast is ퟏ-ퟖퟖퟖ✈ퟖퟐퟗ✈ퟭퟭퟰퟳ // ퟏ-ퟖퟖퟖ✈ퟖퟐퟗ✈ퟭퟭퟰퟳ . Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones that are...
I have a new isp on a 2nd outside interface. I would like to send all traffic from one ip range and only that range out over the new ISP.Currently Here is what I haveinterface GigabitEthernet1/1nameif Outsidesecurity-level 0ip address a.a.a.a 255.255...
So normally a standard interface has an MTU of 1500.When creating a sub-interface on a router (or using an SVI on switch), should the MTU be manually lowered to 1496 to account for the extra 4 bytes?Everything just seems to work without this, so I am...
푫풆풍풕풂 Airline's phone number to call and talk with a live 헥헲헽헿헲혀헲헻혁헮혁헶혃헲 fast is ✈ퟏ(ퟴퟴퟴ)..ퟠퟚퟡ..ퟭퟭퟰퟳ✈ // ✈ퟏ(ퟴퟴퟴ)..ퟠퟚퟡ..ퟭퟭퟰퟳ✈ . Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones t...
So basically I have this problem I have setted policies for Dot1x and MAB on both Cisco IOL L3 (version 15) and Cisco ISE (RADIUS Server) but client do authentificate only with the default method which is MAB (I did set an order for methods on Switch...
hi Cisco,I am using below topology in my lab where ASA in multiple context - C1 and C2 sharing the same physical interface, in different VLANs (sub interface) is not able to establish EIGRP neighborship with 2 cisco routers (point to point). Although...
Hi, My Cisco RV260 router stopped booting from the bouth internal image files. I would like to create a USB boot drive with the original firmware (RV16X_26X-v1.0.01.10-2022-09-12-06-56-24-AM.img) , but I have no idea how to name the img file for USB ...
Hi AllI've inherited a newtwork that includes the C3850 and we've installed the C2960X. These are hooked up via copper ethernet and have a very simple configurationC3850 interface GigabitEthernet2/0/2 description Uplink to C2960X switchport mode tr...
Hello Folks, I have a pair of ASA5516 with HA mode, ISP provides a high-speed WAN 500Mbps up/download, while doing some speed tests recently we noticed that all our tests from the inside network are not bypassing 100mbps, I checked all inside/outside...
hi all,Thanks for your reply!physical topology is very simple: core switch stack (2x WS-C6506-E) connects to access switch via port-channel, no more redundant link. I see lots of topology change logged from core switch, for example:Number of topology...
upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is...
Good morning I am facing the following problem on a customer location with main and backup router. cisco ISR4331/K9 We see constant incoming IHQ packets on the WAN Interfaces on both routers. At the same time there is almost no traffic on the WAN Int...
I am having an issue with Cisco ISE and TenableSC integration. In Cisco documentation it reads that i need to upload the system and root certificates from TenableSC. By using:sudo scp /opt/sc/support/conf/TenableCA.crt [username]@[your ip address]:Te...