The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hi everyone,To all engineers who love cisco CLI, what is the possible solution to this below errorKey exchange failed.No compatible MAC. The server supports these MACs: hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha2-256,hmac-sh...
have tried to launch the CML Sandbox from https://devnetsandbox.cisco.com/DevNet a few times today and each time it was at its capacity. Is there a particular time of day / day of the week where it is more likely to be available?
I have a couple of switches that are trunked via a LAN cable from another switch. I noticed that these switches sometimes have a hard time to SSH into. I get the error: "Connection timed out". After a while and a few tries I can connect just fine. I ...
What is the cause of the problem? only: fia_driver[256]: %PLATFORM-CIH-5-ASIC_ERROR_SPECIAL_HANDLE : tcam[1]: An unexpected-err error has occurred causing halt-alert. KBP_CORE.Error_Status_Register.DBSoftError Do we need to take measures?
I am working on a eem script and struggling to display a script output line by line on a syslog. It show mab all sum and the result is usually like this : Interface Client Mac Authen Status Gi1/0/1 aaaa.bbbb.cccc SUCCESS Tw2/0/2 cccc.dddd.eeee FAILE...
Hi, Tech geeks. I have C9124AXE-E wireless AP and i have upgraded it to EWC by installing 17.9.5 version. now i have connected 4 external antennas with this AP / EWC. what i am facing is unable to get my 5ghz ssid operational, its operational status ...
I am working on connecting some upgraded circuits from our ISP and am having a hard time navigating the dual links that were ordered. I'm working with Catalyst 9300s running 17.5 and am trying to connect both links through my routers. They are dual 6...
Hi everyone,I'm trying to configure, on GNS3, the DHCP snooping+IPSG, the last one just for IP filtering.Anyway, when "ip verify source" is enabled on a port, hosts traffic is dropped regardless the IP DHCP snooping table is apparently correctly fill...
What is the max client count that is recommended for cisco 9120 and 9130 AP operating on wifi 6 with which I can except a decent performance.Could someone please help me with this query?
Hello Team, we tried to retrieve all switches in stack using Cisco Prime Infrastructure 3.10, but we are out of solution. From the Tool, we tried the Report Launchpad/ Device / Detailed Hardware / Switches and hubs, but without success. If we use the...
Dear Community,There have 2 kind different of AnyConnect agent version on ISE.Also have 2 kind of Complain Module as well.There are 2 kindly of Cisco AnyConnect agent on ISE where Client Provisioning Policy. 1. AnyConnect 4.x with its Compliance Modu...