The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Our remote workers utilize RAVPN by installing AnyConnect software on their work machines. To distinguish users based on their groups, I employ Group Policy. While the authentication process is functioning correctly, an issue arises where any author...
Dear CommunityI am a beginner and urgently need help!I am trying to establish an IPSEC/IKEv2 connection between HUB (Cisco Router IOS version 15.8(3)M9) and SPOKES (Cisco IOS XE software, version 17.09.01 via Internet.I also connect Linux-based route...
Hello, I create Ikev2 site to site tunnel between two cisco FPR 1140. I have same subnet on both location and i used source and destionation NAT in one site. My user try access over web some aplication and it is work, but when other site try to acc...
Is the IP address set in the LAN IF of SD-WAN advertised to other site?I configured omp advertise connected. So, the IP address should be advertised, right?
Hi everyone, I recently tried out the recording function of Webex. However, I noticed that there are always a repeat of the screen on the right hand side as marked in the following screenshot in red. Does anyone knows how I can prevent this from happ...
Hello Cisco community, i've got a weird problem. I have a server "A" connected to Gig2/0/18 as an access port (VLAN28) to my Catalyst C9300 switch. I can ping the device from the switch. The switch has an SVI configured for this vlan 28.I also have m...
Access VLANs and Internet through multiple wireless SSIDs, using Autonomous AP AIR-CAP3702Challenge: Access internet through autonomous Access Point (Air-Cap3702i-e-k9) which populated multiple SSIDs that connected to the VLANs at Remote Office. Diag...
I recently installed a 66 inch Samsung Flip with a Room Kit mini and Webex Room Navigator. I have done this before in another Conference room with no problems. Everything works the same as the other room but when the Webex navigator is being used y...
I've got this interment problem where my ip phones aren't able to get an IP address from DHCP. I've got a mix of 9200L and 2960s POE switches. I've experienced the issue on both models, with different version of firmware on each. Different DHCP serve...
Hello togehter,I need to know which Device is connected to a switch port. My starting Point is on Coreswitch where I enter:show mac address-table | inc abcdOutput is:show mac address-table | inc abdc 4 aaa.bbb.abcd DYNAMIC Po1Now I stuck ...
We have over 2,000 staff using Webex to teach classes and in the last couple of days we've noticed a significant increase in complaints about their audio and video quality. Most of them just upgraded to 40.12.3.11 and are now having issues with incr...
Hi folks,Running a Catalyst 9800-40 WLC. 1463 WAP's connected, predominantly C9136I WAP's. 8,817 active clients with 4,796 clients on our SSID using PEAP authentication via ISE on the back end. We are observing clients will frequently disconnect fro...
[Screen Capture Video on 2017-Nov-24 to show the newer Azure Portal] Step 1. Create new IdP instance in ISE. (NOTE: Single IdP configuration in ISE can support multiple ISE web portals, each mapped to a separate Azure app).Step 2. Configure a new web...
Hi TeamNeed help with files uploaded to cisco ise repository. All settings related to FTP and file permission done but yet couldn't access files in the repository. See below error message: XP-ISE-02/admin(config)# repository ftp-repoXP-ISE-02/admin(c...