Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Já ouviu falar de cabeamento estruturado?
by Madalena Saraiva -
Listener Design
by tanwer -
Using "IF" staement in TCL script to modify a switchport config
by Network @RKI -
Warranty Status of cisco ISR 4431 / K9 Router
by khannashirish -
My client is unable to receive e-mails that are secured through Cisco
by maor25 -
DHCP connection timeout on Voice vlan- intermittent occurance
by athomas1 -
how to disable port 80 or http on an ata-190 device
by luoketiantiantian -
Hi Can any one suggest configuration the below topology
by Sairam-VTPL
Community Activity
Complex Call Routing between CUCM and CUC and Back Again
I am with a school system and we have systems in place that allow each campus to be locked down (via controlled access) by dialing an extension "within" each campus. Each campus is setup like a hotel in that you cannot reach a classroom from outside ...
DNS Server forward look up times out
Hello, I am very new to networking and I am currently trying to set up a lab in my computer science class. I am trying to set a forward lookup zone to our parent network's DNS server. When doing so the request says "A timeout occurred during validati...
Listener Design
Our current setup is Ironport relay email to exchange and vice versa, management has come with new solutions trendmicro DDEI they want all inbound mail to go from Ironport -> trendmicro -> exchange and outbound email exchange -> ironport .Currently w...
FMC can't upgrade to 7.2.7 - Readiness fails. Bug?
Getting below error whenever I try to upgrade to 7.2.7 from 7.2.5. We've removed a lot of stuff, but still it says not enough disk, are possibly hitting a bug? ****************** FAILURE SCRIPT: 1 ***********************************[240502 12:10:36:8...
Aironet 1815i Firmware Upgrade
we are using Cisco Aironet 1815i Access Point as a WLC and Access point and need to be upgrade the firmware version 8.5.140.0 to 8.10.185.0. please suggest the step by step process that we need to be followed.
Passing Subject of an email to the "TaskRouted" flow
I am working on a pop-up link for an email channel, when an email comes in, I would like to pass the Subject line of the email to the "TaskRouted" flow where I could use the Subject line content to pop-up a web link. Please Help.
critical process fault, fman_fp_image, fp_0_0, rc=134(ASR 1002 Router Reload)
Hi All, I have been facing some critical issue on my ASR 1002 Router which is reloaded automatically and when i saw the reload reason in "Show Version" then its mentioned this reason for reload ASR Router " critical process fault, fman_fp_image, fp_0...
Device Profiling for Bank ATM Machines
Hi All, Has anyone tried device profiling for Bank ATM Machines? ATM Machines generally run Windows Server OS, which Cisco Secure Client does not support. For ATM Machine Authentication, we can use MAB; however, to avoid the risk of MAC Address Spo...
Ask Me Anything - Drive to 15X
Ask Me Anything Forum - Drive to 15X Welcome to the Cisco Support Community Ask Me Anything discussion! Are you considering upgrading or migrating your UC applications to version 15.x, such as CUCM, CUC, IM&P? If you're looking to learn more about...
Technical presentation document for Firepower needed
Hello everybody,I am looking for a technical (no pure marketing) presentation documentthat gives an overview about Firepower to technical trained persons(PowerPoint, PDF etc.) It don't need to be long.I want to show the hardware, software and concept...
ESA AMP - malicious emails delivered, even positively verdicted
Hello,sometimes we see, even AMP has identified an attachment as "malicious", the mail is delivered to the user's inbox from the AMP quarantine on SMA. There is no indication of the behavior in the logs (per-day limit is also not reached at this time...
what is this cofig?
no device -tracking logging theftI found this on a config of a switch that we copying to our new switches
Using "IF" staement in TCL script to modify a switchport config
Hi all,this ist a part of our switch port config on a C9300 with an IOSXE 17.9.X:+++interface GigabitEthernet1/0/7description RADIUS Portswitchport access vlan XYswitchport mode accessauthentication priority dot1x mab+++now due to some internal issue...
Resolved! Last Reliable Release for FTD 7.4.1 or 7.2.7?
I would like to upgrade the FTD equipment on my campus to release 7.4.1 (latest available), but I can't understand if it is reliable or not. Cisco continues to recommend release 7.2.5 (which has serious security bugs anyway). Version 7.4.1 was releas...
DHCP connection timeout on Voice vlan- intermittent occurance
I've got this interment problem where my ip phones aren't able to get an IP address from DHCP. I've got a mix of 9200L and 2960s POE switches. I've experienced the issue on both models, with different version of firmware on each. Different DHCP serve...
