The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Running FDM on 2110. Ver 7.2.5. We deployed changes, first time job fails. Deployed again, job shows successful but changes aren't in the config. Looks like we were stuck needing to do a Deployment - Force Refresh. Job has been running for about 25 ...
I have a C1111-4P router with c1100-universalk9.17.06.01a.SPA.bin image loaded, I want to update to c1100 universalk9.17.13.01a.SPA.So can I update directly to a new image or need to update any intermediate?
QoS is configured on the IOS-XE SD-WAN Router currently in operation.I checked the QoS statistics with show policy-map and found the following.The bandwidth is 100 Mbps, and Queue 2 is allocated 34% bandwidth (31280 kbps).If more traffic flows to Que...
Hi everyone i'm having issues with caller ID here in mexico, my telephone provider is Telmex and i can figure out the way to get the called Id working. Can you help me with this? I have selected european Fsk in the spa400 and in some calls the caller...
I am with a school system and we have systems in place that allow each campus to be locked down (via controlled access) by dialing an extension "within" each campus. Each campus is setup like a hotel in that you cannot reach a classroom from outside ...
Question to the community out there. (Anyone done this or came across this before?) Running the preUpgrade cop file on my CUCM PUB still on 11.5 I get the following failure. Question: It seems this is only if you go to version 15, a version 14SU3 sho...
Preserve the Cisco Unifed Communication solutions experience by deploying the traditional and on-premise Cisco Unified Communications Manager systems on Webex Calling Cloud Based solution with a Dedicated Instance. Webex Calling Dedicated Instance ...
Hi all,I work for a mid sized financial firm with a total network device count of less than 100, mostly consisting of catalyst 9k (core and access switches), with handful of nexus 9k, MDS 9k, ISR4k, a pair of WLC5520s in SSO (AP3802s), and a dozen F...
after upgrade to 7.5.0 I can't upload pathes We couldn’t complete the upload. Check the file and try again, or please contact Cisco Support. It's the bug - https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwi37950 and Workaround: After gaining access...
I'll soon be upgrading the firmware on several C9200L-24T-4X with 16.12.4 and several WS-C3850-24XS with 16.9.5 to the newest versions that are stable. These switches are all in a network that is offline, and has (as far as I know) no method to reac...
I have a TRIPP-LITE media converter Model: N785-H01-SFP that suddenly stopped working on my C9300-24S after I have updated from 17.6.5 to 17.9.4a. The steps I have taken to trouble shoot are as follow:- swapped the sfp on the switch and media convert...
On a Cisco 9300 I need to Downgrade Boot Loader (ROMMON) from 17.9.2r to 17.3.2r. As a test I upgraded to IOS from 17.3.4 to 17.9.4a, as expected the Boot Loader upgraded as well with the IOS upgrade. When I upgraded the the IOS I did not initiate th...
Hi; one of my routers in my lab (ISR 4331 - IOS-XE SD-WAN image 16.10.1) crashed so it keeps rebooting after showing the some error messages, one of which is: cisco isr 4331 %PMAN-0-PROCFAILCRIT: R0/0: pvp: A critical process viptela_start_sh has fai...