Cisco Community

Meeting Invitees API is not working recently

Could someone know why /meetingInvitees API cannot be used recently? I'm getting Failed to invoke /meetingInvitees: code-403, response-{"message":"Target method cannot access because of access is denied","errors":[{"description":"Target method canno...

ISR4XXX-SEC/K9 into ISR4XXX-VSEC/K9

Hi,We want to reuse ISR4K routers originally deployed as WAN routers and transform them into IPT voice gateways (VGW). As WAN routers, most of them were purchased using the SKU ISR4xxx-SEC/K9. We understand that to transform them into IPT VGW we woul...

How commit-queue really works in NSO?

I have one device southbound locked and one active device. One service is managing those two devices.When I send PATCH request to "/restconf/data/?commit-queue=async" , commits are queued for locked devices, this is fine.However, commits are not queu...

Run a script or update an application after posturing

Hi folks,We are using anyconnect for vpn users and we use ISE for posturing the devices .We are running on version 2.7 patch 9 so our requirment is we need to upgrade the client laptops manage engine desktop client in all laptops we have made a scrip...

CUCM Publisher crashed During RU Upgrade

Dear All,After a crash during the upgrade from CUCM 12.0 to 12.5(SU8), the Publisher needs rebuilding. The backup TAR file isn't detected in DRS for restoration, so a temporary export file was used. Currently, phones are registered to the Subscriber....

CBS350-8P

Hi all, I have a cbs350-8p-e-2g with version 3.4.0.17, every time to reload it will show below message but I didn't make any configuration changes. Is it a bug ?"You haven't saved your changes. Are you sure you want to continue ?"

upgrade UCS and windows operating system driver question

we want to upgrade ucs to new version 4.x.x Does I need upgrade windows server driver ,I found Cisco provide iso driver according to new Ucs version. we have windows server 2012 But I search Cisco ucs compatible matrix web site I found according to ...

Removing config from one interface affects three others

Hi there,I have a question about reconfiguring ports on a couple of core switches at one of our sites.The site in question has a pair of Cisco 6807-XL chassis running in VSS and I have setup some local SPAN ports for a new network defence system. How...

BGP over IPsec between Cisco and Palo Alto (Multiple VRF's)

If I have Site A and Site B:Site A has Border switch that sending prefixes over eBGP peering and multiple eBGP peerings for separate VRFs to the Cisco Routers and that Cisco Router connected via dark fiber with Site B FW (lets say palo alto)What will...

IKEv2 SA drops immediately

Hello,I want to set up a IPSec IKEv2 VPN to a central ASA. On my side we have a cisco 897.First I tried a crypto map configuration. Didn't work because the IKEv2 SA goes UP and immediately goes DOWN with the error message "IKEv2:(SESSION ID = 1,SA ID...

CISCO2911/K9

ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)Router uptime is 1 minuteSystem returned to ROM by error - a Software forced crash, PC 0x30EEBBE8 at 06:3 9:57 UTC Wed May 8 2024System image file is "flash0:c2900-universalk9-mz.SPA.1...

Webex click to call popup

Hello, When you use the Click-to-call feature on an Windows PC with Webex: for example use one of the commands below: tel:+31612345678 webextel:+31612345678 Build a Click-to-Call Shortcut Using Adaptive Cards in Webex | Webex Developers Blog You get ...

SXP between C9300 and C2960X

Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...

WLC remote office DHCP

Hello,we have WLC controller in our main office and some APs in it connected to WLC.Also we have remote office with local DHCP server and some APs.Remote office is connected to main office by VPN tunnel and remote office APs are added to main office ...

Reset CSPC 2.10 GUI accounts from CLI

Attempting to login on CSPC for a long time and my password got expired. The prompts says that I haven't specified the password reset questions and answers which is not true as this used to work before. My question is: can I reset my CSPC account fro...

Congratulations to the Event Top Contributors Class of 2024!

April Community Updates

Introducing Our New Gamification Ranking Naming

Community Activity