The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hello, I am working on ACI fabric and have been using EPG with contracts (network-centric), and I want to switch to ESG (application-centric).The bridge domains have specific subnets (192.168.1.0/24 and 192.168.2.0/24) under the same tenant/VRF. Each...
I have some locally managed FTDs. I'm parsing syslog data for VPN auth failures. The FDM FlexConfig won't allow some of the simplest changes like "no logging hide username" (bug). Anyway, most the AAA user authentication errors indicate reason = Unsp...
Hello everyone,I have the following questionIs it possible to change the syslog server port on the nexus 700?And if so, how do I change the syslog server port on the nexus 7000?Thank you.
Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...
Hello, I am very new to networking and I am currently trying to set up a lab in my computer science class. I am trying to set a forward lookup zone to our parent network's DNS server. When doing so the request says "A timeout occurred during validati...
To all experts; I like to know if I can use Ethanalyzer to troubleshoot a DHCP problem, the DHCP client and server are running in a VMware machine, I am not clear if the DHCP traffic can be by visible by Ethanalyzer if it is, I appreciate if you ca...
hi , we have only one Cisco layer3 switch (C3850) in our office ,and want to enable multicast routing between two vlan 2 & 3. How should configure pim on C3850? can use spare-mode or dense-spare-mode? Can anyone pls advise? thanks in advance!
Hello,we have WLC controller in our main office and some APs in it connected to WLC.Also we have remote office with local DHCP server and some APs.Remote office is connected to main office by VPN tunnel and remote office APs are added to main office ...
Hi, I have a question regarding different search results on FMC in an access control policy. I want to search for all hosts within a network. What will be the best search expression? When I search for 111.111.111. I will receive 72 results. When I se...
I running into an issue with Catalyst SD-WAN went trying to push a simple template to a devices. I keep getting the following error no matter what I adjust in the system template: [7-May-2024 21:50:51 UTC] Configuring device with feature template: c8...
Does anyone know if any cisco ASA version supports Micro-BFD (RFC 7130) ?I'm having a hard time finding it in the documentation so probably not.maybe in an upcoming release?
We recently moved to a SIP trunk and inbound/outbound calls worked just fine, but DTMF is not functioning for SCCP phones. When a call is made and we get an auto-attendant (using a SCCP phone), when selecting an option, the selected option is not reg...
Hi, We are receiving the below RTMT alert but unable to find any information related to the warning. Can anyone advise anything for this behavior. UTC : %UC_SERVICEMANAGER-2-ServiceFailed: %[ServiceName=Cisco Trust Verification Service][Reason=Servi...
Hi, Customer bought Cat8500 with DNA Advantage license but is going to use this router in autonomous mode. Resently, It was apllied a license and here is output: License Usage:License Entitlement Tag Count Status--------------------------------------...