Cisco Unified Enterprise Attendant Console is an efficient application especially designed for handling calls and messages. This application enables you to answer calls from a pre-defined set of queues and transfer them to desired extensions.
The application enables you to perform comprehensive tasks such as Call Conference, Call Transfer, Call Parking and Call Retrievals. The user-friendly design of the application gives speed and flexibility, and also facilitates you to manipulate calls with simple mouse clicks or keystrokes.
This document describes the error message and the workaround related to the Cisco Unified Enterprise Attendant Console.
There are no specific requirements for this document.
The information in this document is based on the Cisco Unified Enterprise Attendant Console 3.x/8.x.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Refer to Cisco Technical Tips Conventions for more information on document conventions.
When a new call comes in, a salutation pops up. When you try to answer the call, it intermittently freezes.
In order to resolve the issue, perform these steps:
From the View Menu of Cisco Unified Enterprise Attendant Console, press Ctrl-F7 in order to turn off the salutation.
On the Cisco Unified Enterprise Attendant Console (CUEAC) Web Admin page, go to User Configuration > Queue Management, and clear the Salutation field.
This step disables the Salutation.
Note: This issue is fixed in CUEAC version 184.108.40.2060.
You are unable to reset the admin password in CUEAC 8.0.
Complete these steps in order to reset or recover the admin password:
Go to Start > Programs > SQL 2008 > Server Management Studio.
Click New Query, and run this query:
UPDATE [ATTCFG].[dbo].[Agent_Details] SET Password = NULL WHERE Login_Type = 'SUP' AND Login_Name = 'ADMIN'
Open the Control Panel, go to Service Management, and restart the Attendant Console Server service.
Log in to the app admin: user is ADMIN; no password is required.
Once you are on the app admin page, you can set a new password.
With CUEAC 8.x, you are unable to upload the original license file.
Complete these steps in order to resolve the issue:
Go to Start > Programs > Administrative Tools > Internet Information Service (IIS) Manager.
Under local host, browse to Web Sites > Default Web Site > WebAdmin, right-click WebAdmin, and choose Properties.
In the WebAdmin Properties window, click the Directory Security tab.
Click the Edit button located in the Authentication and access control section.
In the Authentication Methods window, you can see the user account used for Anonymous access. In case of default installation, this shows the Administrator account.
Replace this account with an alternate local administrator account. Be sure to provide a password for this user account in the Password field.
Click OK or Apply to close all open IIS dialog boxes.
This error message is received when you attempt to install Cisco Unified Enterprise Attendant Console:
Cisco Unified Enterprise Attendant Console is not supported on a 64-bit operating system. You must install CUEAC on a 32-bit Windows server.
After CUEAC 8.5(1) installation, you are unable to log in to the CUEAC, and you receive this error message:
API failed to be initialed.
In order to resolve the issue, you must enable ASP.NET under IIS service.
You are unable to log in to the CUEAC, and you receive this error message:
A connection Failure has occurred attempting to connect to server x.x.x.x, using server port 1859. Please ensure the server is active, and the logging in information is correct.
Disable the firewall in order to resolve this issue.
For information on how to troubleshoot this issue, refer to CUEAC Phone status is "Out of service".
This table lists the client requirements for the Attendant Console to be compatible with the Windows 7 operating system.
|Product Component||Hardware and Software Requirements|
|Cisco Unified Business Attendant Console||
After a fresh installation of the Cisco Attendant Console, the web admin page displays with errors, and you are unable to see the icons and menu links.
This issue can occur if the IIS service on Service Manager does not have any roles assigned. Complete these steps in order to resolve the issue:
Click Add Role Services under IIS Services (Service Manager).
Make these selections under common HTTP features:
Enable Static Content Compression and Dynamic Content Compression under Performances.
Issue the iisreset command from the command line in order to install these new services and restart the IIS service.
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.