Document ID: 100304
This document describes the limitations of the Call Forward All (CFwdAll) feature with respect to the secondary line appearances.
There are no specific requirements for this document.
The information in this document is based on Cisco Unified Communications Mananger (Cisco CallMananger).
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Refer to Cisco Technical Tips Conventions for more information on document conventions.
The CallForwardAll button does not work for secondary line appearances from the phone CFwdAll softkey on a multiline appearance phone. When you press the secondary line appearance button and then the CFwdAll softkey, this yields a reorder tone. Primary line appearance can be forwarded just fine.
Cisco Unified Communications Mananger (Cisco CallMananger) only allows users to set the CFwdALL feature from the primary line.This softkey cannot be used with the other extensions.
The workaround is to forward-all the secondary lines with the CCM Admin page. Complete these steps:
Choose CCMAdmin > User Management > End User. Click Add New and enter all required settings for the new user. Click Save.
On CCMAdmin, choose User Management > End User and find the user that you just created and click on it in order to display the End User Configuration page. Choose Device Association > Find/Select and find the IP phone that this person uses. Click Save selected/changes.
On CCMAdmin, choose User Management > User Group. Choose Standard CCM End Users and choose Add end users to group > Find/Select to choose the new user that you created. Then click Add selected.
Complete the next steps in order to be able to forward-all the secondary lines on your IP phone:
Open a new browser window and access this URL:
Enter the user name and password of the user that you just created and click Submit. From the Select a device or device profile to configure drop down menu, choose the appropriate device. Choose Forward all calls to a different number from the options available. You see Forward all incoming calls on line to and these are the two available options:
- Unable to Cancel Call Forward All from an IP Phone
- Cisco CallManager Issues with Call Forward All
- Voice Technology Support
- Voice and Unified Communications Product Support
- Troubleshooting Cisco IP Telephony
- Technical Support & Documentation - Cisco Systems
|Updated: Dec 02, 2007||Document ID: 100304|