Cisco Unified Communications Manager (CallManager)

Document ID: 82043

Feedback

This series of interactive documents uses a typical head office and branch office in order to demonstrate some common voice network configurations. This interactive diagram allows you to view network configurations:

This image is interactive! Click a component to view configuration and troubleshooting information.

Refer to Unified CallManager Interactive Voice Network Configuration and Troubleshooting Case Study for requirements assumed by this series of interactive documents.

Configure

This section describe the Manager phone configuration for the San Jose location. For more information about these configurations, see Introduction.

In order to configure phones for the San Jose location, complete these steps:

1. Configure the parameters as shown in this image:
   
   
   
   
2. In order to configure the Directory Number (DN), configure the parameters as shown in this image:
   
   
   
   Note: Only the 5001 DN is shown in this configuration.