This document explains the recommended workaround for the Web login failed. JTAPI login successful error message that appears when a user tries to login to Cisco Unity Express with an already defined, valid username and password, the same credentials used on Cisco Unified Communications Manager 5.x.
Cisco recommends that you have knowledge of these topics:
Cisco Unified Communications Manger 5.x (CallMananger)
Cisco Unity Express
The information in this document is based on Cisco Unified Communications Mananger 5.x.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Typically, the Web login failed. JTAPI login successful error message appears if the Administrative XML Layer (AXL) service is not enabled on the Cisco Unified Communications Mananger.
Complete these steps in order to enable the AXL service on Cisco Unified Communications Mananger 5.x:
Log into Cisco Unified Communications Manager 5.x.
Choose Cisco Unified Serviceability from the drop down menu in the top right corner.
Choose Tools > Service Activation when the new page loads.
Choose the Cisco CallManager server.
Scroll down to Database+ Admin Services.
Check Cisco AXL Web Service.
The 404 error is received when attempting to access the CUE web interface.
In order to resolve this issue, check that all the GUI files are in the flash. Then, check that these commands are in the running configuration of the router:
ip http server no ip http secure-server ip http path flash:
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.